Best Hilitchi Terminals in 2026

PACKAGE CONTENTS: 5 PCS. of Heavy Duty Bare Copper 0 Gauge (AWG) 1/2" Ring Battery Terminal Connectors / Lugs. 100% annealed copper, providing a high degree of conductivity for maximum current flow when used as battery terminals.

DURABILITY: Approved by OEMs, our electrical wire ring connectors are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength.

WIDE APPLICATIONS: Selterm copper lugs wire connectors have a close end pad design, keeping electrical components, battery and ring terminals safe and act as waterproof wire connectors which prevents solder from leaking during installation of lugs or while using as a heat shrink wire connectors for your battery in Solar Panel system, Golf Carts, Power Inverter, RV's, Marine, Home appliances, DIY Electrical wiring, Automotive and other equipment.

HIGH QUALITY-Shrinking ratio: 3:1.Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Thick barrel ensures strong crimp every time. Your wire will never slip out of these heat shrink butt connectors.

DURABILITY-Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside. The thicker and better copper of the heat shrink butt connectors provides increased current flow andensures less voltage drop, preventing wiring failures and reducing equipment downtime.

PACKAGE INCLUDED: 120 pcs Yellow Heat Shrink Butt Connectors.A.W.G: 12-10, Wire range: 4.0-6.0mm².

✔ HIGH QUAILTY COPPER CORE:Core Heat shrink butt connectors use the copper core with high thickness,which is up to 1mm.Make connection project safer!High thickness copper core calls the attention of buyers!

✔HIGH QUALITY HEAT SHRINK:Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage.Thick barrel ensures strong crimp every time. The inner wall of heat-shrinkable tube has enough hot melt adhesive to ensure waterproof performance.Your wire will never slip out of these heat shrink butt connectors.

APPLICATION AREAS:Application in areas such as automotive, watercraft,electrical and electronics industries, with 3 different sizes, So that repair work is much easier.

☆『What You Will Get:』In this set, we offer 10pcs 1/0 Awg - 3/8" (M10)ring terminals copper lugs tube end termination ring terminals for your work, 5Pcs black and 5 red 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube.

☆『High Quality:』All the ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity. All the 3:1 shrink tube is well made of high quality material, thick and durable.They are both for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable.

☆『Reliable and Easy to Use:』Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency.

Premium Materials - Our heat shrink butt connectors have a high-quality copper tubular, which ensures increased current flow, and less voltage drop, thus preventing wiring failures and reducing equipment downtime. Also, the thick tubular of butt connectors ensures strong crimp every time - your wire will never slip out of the connector

Durability - Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Dual-walled tubing ensures waterproof seal and prevents wire corrosion. The inner wall of the waterproof heat shrink tube has enough hot melt adhesive to ensure waterproof performance

Waterproof - Designed with polyolefin outside and hot melt inside provides excellent waterproof property. When heating, the polyolefin tubing reduces in size and adhesive flows inside the insulation. The butt connectors heat shrink comply with all relevant standards, Shrinking ratio: 3:1

Tinned Copper Core: Butt connectors use a heavy-duty copper core, strong crimp, higher conductivity.

Package Includes: 50 Yellow heat shrink butt connectors that can be used on wire AWG from 12 to 10.

Solderless Crimping: Insert the wires to be connected, crimp both sides with crimping pliers, and then heat with a heat gun.

Brand new high quality spade wire crimp terminal, convenient, quick and safe disconnects, to prevent wiring fault, ideal wire connector for electrical wiring.

Technology: Tin plating/matte plating, nylon cover insulated, plated copper cores to prevent corrosion & engineered to hold the strongest crimps Width: 0.25 inch

Durable male fully insulated nylon quick disconnects

QUICK DISCONNECTS - Male/female spade connectors can be easily mated and pulled apart. They are convenient for applications that require frequent connections. Female spade connectors work great for bus bar and fuse box installations.

PROFESSIONAL SPADE CONNECTORS - Our spade connectors are crafted from high quality copper, as well as heat shrink tubing with adhesive lining. These terminals crimp, shrink, and seal well.

STRONG CRIMPS - Double barrels designed to ensure stronger crimps. Heat shrink tubing adhesive glues to the wire insulation for enhanced tensile strength. Your wire will not slip out.

Good Material: Made of T2 copper tubular, electro-Tin Plated for Corrosion Resistance

Features: Electrical splicing non-insulated butt splice connectors are built with a wire stop barrier on center, ensures the effect of compression

Performance good: Easy to connect with electrical wire and strengthen its reliability and safety

What you get: 150pcs 22-16 AWG non insulated butt connectors, 120pcs 16-14 AWG non insulated butt connectors, and 30pcs 12-10 AWG non insulated butt connectors.

Material: The wire butt connectors are made from high-quality copper tubular with tinned surface for corrosion protection.

Easy to use: The uninsulated butt connectors are great for non-bulky splices, simplify the process of electrical splicing.

VARIETY OF TYPES - This kit includes the most common terminal types: ring, fork, spade,butt connectors. Each connector type in 3 industry standard sizes: red (22-16 AWG), blue (16-14 AWG) and yellow (12-10 AWG).

COLOR CODING - Gauge sizes run from 22 gauge to 10 gauge with the heat shrink connectors color following the industry standard wire range. All of the colors are translucent, which allows them to quickly be distinguished from non-heat-shrink insulated wire connectors.

ADHESIVE INSIDE - Heat-shrink electrical connectors have insulation that shrinks when heat is applied, shrinkage ratio 3：1 . Adhesive inside the insulation that seals tightly against the wire to help to make the connection firmly, which in turn helps prevent corrosion.

The terminal is rolled and Non-Insulated.

Ideal for non bulky splices, make splicing simple.

Package Included: 20 x 12-10 AWG, 90 x 16-14 AWG , 90 x 22-16 AWG

DURABLE AND STRONG BARREL: Thick tinned copper barrel of our wire crimp connectors is designed to strongly hold wires. Corrosion resistant properties and strong grip of barrel make our crimp terminals the ideal choice for your boat and vehicle.

HEAT SHRINK TUBES: Our heat shrink tubes for ring terminal connectors will shrink to ratio 3:1. E-Volt’s solderless tubes are made of flame retardant material which protect the joints from fire, up to a certain temperature

HIGHEST QUALITY PRODUCT: Our electrical wiring fittings are in compliance with ISO 9001:2008, ROHS, SGS and CE. We have maintained the highest quality standards to deliver superior electrical ring connectors to our customers

EASY TO USE - Simply strip your wires, insert into the solder sleeve and apply heat. Soldered butt connections are made in seconds.

IMPROVED TECHNOLOGY - Lower temperature solder will melt faster and prevent burns in the insulation tubing.

WATERPROOF - Heat activated adhesive will seal your connection making it waterproof. Transparent tubing allows to inspect your connection after it is completed.

ROCK-SOLID:haisstronica fork connectors of size #10 has the best thick tinned copper barrel to hold 12-10 AWG wires.Copper Thickness 1mm.Strong conductivity.

COMPLIANT WITH ALL RELEVANT STANDARDS:With Haisstronica heat shrink fork wire connectors are compliant with ROHS, ISO 9001:2008, SGS, and CE standards.

HEAT SHRINK TUBING:The fork connectors shrink to ratio 3:1 and provide strong abrasion resistance and environmental protection while making joints mechanically strong.

Suits cable wire sizes: 12-10 AWG (4.0-6.0mm²)

Max Current: 48 Amp

Terminal Body: Copper

☑[High Quality] - Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside. Shrink Ratio 3:1. Thick barrel ensures strong secure crimping every time to prevent wire failure, increase current flow, decrease voltage drop, and reduce equipment downtime.

☑[Package] - Heat shrink wire connector kit come within a storage box, easy to store and carry. This package includes butt, fork, ring, male and female connectors that can be used on wire AWG from 22 to 10. Different color coded tubing with wire gauge imprint provides easy identification.

☑[Easy to Use] - Strip the wire insulation and insert into splice barrel, crimp the connector barrel, and heat with a hot air gun or mini blow torch. Start establishing secure, persistent connections in seconds.

Fully-insulated vinyl disconnects 16-14 AWG & 22-16 AWG

600 V maximum rating for building wiring & 1,000 V Max rating for signs and fixtures

167°F Max. temperature rating

PACKAGE INCLUDED:60PCS Solderless Quick Splice Wire Connectors, 22-10 AWG Scotch Lock Snap Electrical Wire Connector(22-18AWG Red 20PCS, 18-14AWG Blue 30PCS, 12-10AWG Yellow 10PCS)

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL:The shell is made with flame-resistant material, safer than normal plastic.

PURE TINNED COPPER:We manufacture our marine connectors from pure copper for maximum current flow and minimal voltage drop. The tin coating protects your electrical connections against corrosion.

High Temperature Crimp Wire Terminals Are Designed For Use In Applications With Environments In Which Standard Connectors Could Melt. Made With Nickel-Plated Steel And Rated For 482°C (900°F), These Terminals Are Ideal For Motors, Ovens, Or Other Extreme Temperature Applications. Hi-Temp Terminals Are Designed To Connect A Single Wire To A Screw Or Stud Type Electrical Connection.

Temperature Rating: 482°C (900°F) continuous, 649°C (1200°F) intermittent.

High Temperature Crimp Electrical Wire Terminals Available In 22-18, 16-14, And 12-10 Awg Gauge Ring, Fork Spade, Male & Female Disconnects & Butt Splice Connectors.

Insulated Piggyback Connector 6.3mm Female/Male To Take Cable Size 0.5-6.0mm² / 22-10AWG

Material Insulation:Vinyl Terminal Body:Copper Plating:Tin

22-16 AWG Red connector: 40 pcs; 16-14 AWG Blue connector: 50 pcs; 12-10 AWG Yellow connector: 10 pcs

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL: The shell is made with flame-resistant material, safer than normal plastic.

PURE TINNED COPPER: We manufacture our connectors from pure copper for maximum current flow and minimal voltage drop. The tin coating protects your electrical connections against corrosion.

CONNECTION WITH EASE: Connectors turn any electrical wiring job into a fast and highly efficient process. Simply crimp your terminal. Professional grade electrical connections can be made in seconds.

PACKAGE INCLUDED:80PCS Spade Quick Disconnect Wire Connectors, 22-10 AWG Male and Female Wire Crimp Terminal(22-18AWG Red 15Pairs, 18-14AWG Blue 15Pairs,12-10AWG Yellow 10Pairs)

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL:The shell is made with flame-resistant material, safer than normal plastic.

PURE TINNED COPPER:We manufacture our marine connectors from pure copper for maximum current flow and minimal voltage drop. The tin coating protects your electrical connections against corrosion.

Equipped with red tinned coper each connector ensures good electrical conductivity and durability. Highly resistant to vibration and mechanical shocks make your terminal connections more reliable with its secure and tight crimping

Protecting your marine, automobiles and electrical appliances for getting wet. Each crimp connector has a unique translucent dual-adhesive sealant lining inside. Making it a protected seal for wire splices

Use the high-quality tube with 3:1 shrink ratio and bends without any mechanical damage. Keep the wire connection secure from corrosion and reduces the equipment downtime

<b>[Save your wrists!]</b> WAGO LEVER-NUTS are lever-actuated, which means that there is no twisting; no taping!

<b>[Re-usable.]</b> Because of their innovative design, WAGO LEVER-NUTS may be opened and closed repeatedly with no loss of connection integrity.

<b>[UL486C Listed for solid or stranded wire.]</b> These hardy connectors meet or exceed rigorous standards for pull-out, temperature-cycling, vibration and corrosion resistance.

TINNED COPPER: Each E-Volt butt connector features corrosion resistant copper tube to hold 12-10 wire tight. E-Volt’s female spade connectors are designed to have a strong grip and last longer than ordinary electrical connectors

HEAT SHRINK TUBES: Our heat shrink tubes for spade wire connectors will shrink to ratio 3:1. E-Volt’s solderless polyolefin tubes are highly flexible and abrasion resistant

HIGHEST QUALITY PRODUCT: Our electrical wiring fittings are in compliance with ISO 9001:2008, ROHS, SGS and CE. We have maintained the highest quality standards to deliver superior electrical ring connectors to our customers

PACKAGE INCLUDED:50PCS Nylon Flag Spade Quick Disconnects Female Wire Connector 22-10 AWG 90 Degree Electrical Crimp Wire Terminals(22-18AWG 20PCS, 18-14AWG 20PCS, 12-10AWG 10PCS)

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL:The shell is made with flame-resistant material, safer than normal plastic.

PURE TINNED COPPER:We manufacture our connectors from pure copper for maximum current flow and minimal voltage drop. The tin coating protects your electrical connections against corrosion.

Package Includes: 500 Yellow heat shrink butt connectors that can be used on wire AWG from 12 to 10.

Tinned Copper Core: Butt connectors use a heavy-duty copper core, strong crimp, higher conductivity.

Solderless Crimping: Insert the wires to be connected, crimp both sides with crimping pliers, and then heat with a heat gun.

PACKAGE INCLUDED:100PCS Semi-Insulated Piggyback Spade Connectors 1/4" 22-10 Gauge Female and Male Quick Disconnect Piggyback Spade Crimp Terminals Assortment Kit

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL:The shell is made with flame-resistant material, safer than normal plastic.

PURE TINNED COPPER:We manufacture our marine connectors from pure copper for maximum current flow and minimal voltage drop. The tin coating protects your electrical connections against corrosion.

Product Name:High quality Quick Splice Terminals;Quick addition of a circuit without cutting, striping or splicing

Product Color:Red,Blue,Yellow;Shape: Flag Type/90 Degree;End Material: Tinned Brass.Insulating Sleeve Material: Nylon

Nylon material have good insulativity. Copper have good electroconductivity.high conductivity, anti-oxidation, durable enough for your use,safe to use