Best Metal Tool Trays in 2025

STAY ORGANIZED: Keeps small metal parts and tools from getting lost while you work

USE ANYWHERE: Even works sideways and upside down

STRONG MAGNETS: Two strong double magnets

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of machined aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket rail to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum socket rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch rail, you can.

Keeps nuts and bolts, parts, and small tools within reach of work area

Helps prevent lost or misplaced parts, fasteners, and tools

Mount tray horizontal, vertical, or upside down to hoods, fenders, or other ferrous metal surfaces

Store and organize up to 13, 1/4" drive sockets; Eliminates clutter in toolbox and service cart drawers

Quick and easy access during projects or tasks; Transfer between cart, metal surface, and work area

Rust resistant, magnetic backing secures organizer onto most metal surfaces; High technology magnetic material won't magnetize your tools or damage on board computers

[Organize Fasteners and Tools]: Prevent losing your screws, nuts, bolts, nails, and other small parts with the ABN Mechanic Magnetic Tray Screw Magnet Bowl Set; Organizes and secures your metal fasteners and tools so they do not get lost in drawers or on the ground

[2 Piece Set]: Magnet part tray set includes a 9 x 6-inch (22.9 x 15.2cm) rectangular tray and a 4 x 4-inch (10.2 x 10.2cm) round tray; 1.3-inch (3.3cm) depth holds mechanical pieces or metal office supplies

[Strong Magnetic Force]: Thick magnets mouthed on the bottom of each magnetic part holder tray provides 4 pounds (1.8kg) of pull force to ensure stability for your fasteners and tools; Even if knocked over, this magnetic bolt tray will help keep your parts in place

✅ REAL LIFETIME WARRANTY - Whether your bag Rips, Tears, or Frays we will Replace it at no cost

ULTIMATE ROLLUP TOOL BAG - Upgraded Metal Clips, Zippers & Double Diamond Stitching for Long Lasting Durability

SAVE TIME WITH LABELS - Pouches are Labeled for all Your Tools (Wrenches, Pliers, Sockets, Speciality & Misc.

Organization - Keeps nuts, bolts and screws from getting lost

9.5” Rectangle Magnetic Parts Tray with Heavy duty gauge stainless steel

Rubberized back to prevent damage to any surface

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of extruded aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. Each rail also features locking end caps for added security. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your tool box more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented spring-loaded detent ball socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can. For additional 1/4-inch, 3/8-inch, and 1/2-inch drive clip sets, see ARES 70081, 70082, 70083, 60050, 60051, and 60052.

Made of stainless steel with magnets, strong and durable. Set include: 3", 4" and 6" diameter round trays

The Strong Magnet Will Hold On To Them-It Even Works Upside Down

Rubber Bottom For Griping and Protects from surface scratching

Material and Sizes: Made of high-quality, anti-static silicone. Includes three sizes: Small - 11" x 5.7", Medium - 10.1" x 9.2", Large - 21" x 11.5".

Easy Access: These non-slip, flexible tool trays effectively organize your tools such as fasteners, hammers, wrenches, sockets, drill bits, nuts, bolts, etc. They ensure your tools are easy to locate, promoting orderly work and improved efficiency.

Heat Resistant and Flexible: These tool trays can withstand temperatures up to 500°F. Their unique material holds tools at up to a 70° angle. They are slip-resistant, making them suitable for any working surface.

Made of stainless steel material, strong and durable.

Includes Round 4.5" x 4.5"(11cm x 11cm), and square 9.5" x 5.5" (24cm x 14cm) trays.

Keeps parts and tools from being misplaced or lost while working

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

★ EXTRA HIGH CAPACITY - This Olsa Tools magnetic hex bit organizer tray can hold up to 37 of your 1/4 inch hex bits. Get reminded of how much easier your life will be when you don't have to sift endlessly for the right drill bit.

★ STRONG MAGNETIC BASE - Built with a powerful ferrite magnetic base, you can mount this organizer for bits on almost any steel surface: your tool boix, toolchest, tool cart, or even metal sheets. The magnetic base also securely holds your bits in place so that they won't go anywhere.

★ HIGH GRADE MATERIAL - Constructed with high grade impact resistant polypropylene material, you can be sure that your new hex bit holder will last you for years on end.

【 Updated Multi-Function Set】Combination design package contains round ice cube trays with lids ice tongs +Ice cube box.Freeze your ice cubes and pour them into the ice container for easy access,Each ice cube trays pack comes with everything you need to make ice in your refrigerator

【Easy to USE】Round ice cube trays set consists of one tray and a lid with small holes.Just pour water into the bottom one-time and put the top back on. Then put ice molds into the the freezer for 4 hours at least. Freeze your ice cubes and pour them into the ice box for easy access

【 Easy Release Ice Cubes】The ice trays are made of highly-elastic plastic,food-grade level,flexible and durable.The unique design of the ice ball maker makes sphere ice cubes easier to release with just a twist. No need to wait for the ice cubes to melt a bit,much more convient than traditional silicone one.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

Large Capacity Magnetic Socket Organizer Set: These magnetic socket organizers can store up to 141 metric and SAE sockets and two drive adapters. The kit includes three blue metric magnetic socket organizers and three red SAE magnetic socket organizers for 1/4", 3/8", and 1/2" drives. Used to collect SAE and metric receptacles, but not for impact sockets. Tip: sockets are not included with the holders.

Magnetic Base: The magnetic base secures the sockets in their designated places. They won't fall out even if you turn the socket tray upside down. They also allow you to attach the tray to any steel surface.

No scratches Installation: The surface of the magnetic base is composed of soft rubber, so there is no need to worry about scratching the surface of your metal tools and sockets, perfect fit for your toolset.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

[Premium Material] This magnetic parts set, set is made of stainless steel which is strong durable, long-lasting, powerful, and non-marring

[Save Time and Headache] Perfect for holding parts, hardware and fasteners in place, Keeps parts and tools from being misplaced or lost while working, increase the work efficiency

[Wide Application] Sticks to any ferrous metal surfaces. The magnets are super strong, and the trays can be used upside down, sideways, on the side of toolboxes etc.

OPTIMIZE YOUR SOCKET RAIL: Use the ABN 3/8" Inch Drive Spring-Loaded Ball Bearing Socket Clip 10-Pack – Aluminum Organizer Holder Rail Replacement Clips to replace clips or add to your existing socket rail; 2/5-inch inner diameter (ID) and 1-3/10-inch outer diameter (OD) (11mm ID, 26mm OD) to fit most standard socket rails

WORKS WITH YOUR EXISTING RAIL: Standard socket clips with patented ball bearings glide over your aluminum for PA-series and ALM-series socket rail; Clips slide easily along rail systems so you can quickly access your socket of choice

MIX AND MATCH: If you want a few 3/8-inch sockets on your 1/4-inch or 1/2-inch rail, you can do so thanks to our interchangeable clip system; Clips will fit on any of the rails allowing you to mix and match your sets as you please

ORGANIZER FOR YOUR PROJECTS: Whether you are a professional mechanic or have home projects, there is nothing more frustrating than losing nuts and bolts while trying to get work done; No longer will you need to worry about getting screws and other small parts mismatched and lost in a drawer with the ABN Magnetic Pan for Screws 1-Pack

BUILT TO LAST: No need to worry about this magnetic tray for tools falling victim to the parts you store in it; The high-quality stainless steel of this magnetic dish to hold screws is rust-resistant and prevents gas and oil buildup; Designed with a heavy-duty rubber base, this parts tray is resistant to scratches from daily use and wear

MAGNET TRAY STRENGTH: Tool tray magnetic dish has 4 pounds (1.8 kg) of magnetic pull keeps fasteners and other metal components inside the tray and near you while you work; Magnet trays are designed to be sturdy, stable, and secure; Even if the magnetic tool organizer gets knocked off its mount, the small parts remain within the magnet screw holder

STRONG NEODYMIUM MAGNETS can be attached horizontal, vertical, or up-side-down

PERFECT for keeping all metal parts such as nuts, bolts, screws and drill bits securely and together

MADE OF STAINLESS STEEL with a polish finish

DESIGN CONSIDERATIONS: This flexible magnetic mat helps prevent lost or misplaced parts, fasteners, and tools both in storage and on the job. Whether you want to use it to organize your toolbox drawer or use it on the side of the vehicle you're working on, this mat will conform to the surface it's placed on and keep tools and parts firmly in place.

QUALITY: Our flexible magnetic tool and parts mat is made of durable and easy-to-clean vinyl that will stand up to brake fluid, oil, gasoline, and most other chemicals in your garage. The vinyl construction also prevents damage to finished surfaces. Measuring 6.75 inches by 14 inches, this flexible mat is large enough to organize a tool drawer, but compact enough for on the job use, so you can use it anywhere there's ferrous metal.

COMMON APPLICATIONS: Keep nuts and bolts, parts, and small tools within reach of your work area. You’ll be able to mount the magnetic mat horizontally, vertically, or even upside down to hoods, fenders, or any other ferrous metal surface. It's also a great tool box and drawer organizer that will help ensure your tools stay exactly where you left them.

Spot the Difference: Keep your socket drawer tidy and easy to access; Color coded socket trays make it that easy to tell your metric sockets from your SAE sockets at a glance

Mechanical Magnetism: The base of each socket tray contains a powerful magnet that keeps your tools in place; Carry this mobile socket organizer without worrying about dropping tools

Smooth Operator: Rubberized backing that will not mar or scratch surfaces lines the base of these socket trays; Attach to any ferrous metal surface to organize as you please

3 PCS. MAGNETIC PARTS TRAY: Mini Magnetic Parts Tray measures 4-1/4" in diameter with a super strong rubber-covered magnet to protect surfaces from scratches. Perfect for holding screws, bolts, nuts, washers, small metal tools and parts to help keep you work area neat, clean and organized

ROUND MAGNETIC PICKUP TOOL: The Magnetic Retriever telescopes from 6-1/2" to 33" to easily help you pick up screws, nuts, and other small steel objects that might have fallen into harder to reach areas. Features a pocket clip and non-slip rubber handle that offers superior grip saving you time when picking up awkward placed items

TELESCOPING INSPECTION MIRROR: This hand-held inspection mirror measures 1-1/4" diameter and telescopes from 6-1/2" to 19". Glass mirror allows you to see and inspect around hard to see areas and blind spots of you work area.

ITEM SPECIFICATIONS: This portable magnetic socket organizer is 12 inches long and comes with 12 3/8-inch drive socket clips that feature spring loaded ball bearings to firmly hold sockets in place, even upside down.

QUALITY CONSTRUCTION: Made of machined aluminum, this socket rail features strong magnets and will attach to any ferrous metal surface. With EVA foam on the bottom of the rail, your sockets can be safely placed on any work surface so you'll have them right at your finger tips without having to worry about damaging finished surfaces.

INTERCHANGEABLE: Our patented ball bearing clips glide over any of our aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch rail, you can. Check out ARES 70081, 70082, and 70083 for additional socket rail clips.

【Updated Multi-Function Set】4 in 1 combination design package contains 2 circle ice cube trays with lids + an ice scoop +ice tongs + ice cube box, Freeze your ice cubes and pour them into the ice container for easy access,Each ice cube trays pack comes with everything you need to make ice in your refrigerator

【Easy to USE:】Round ice cube trays with lid and bin set consists of one tray and a lid with small holes. Just pour water into the bottom one-time and put the top back on. Then put ice molds into the the freezer for 4 hours at least. Freeze your ice cubes and pour them into the ice box for easy access(2 trays making 66pcs balls at one time)

【Easy Release Ice Cubes】The ice trays are made of highly-elastic plastic,food-grade level,flexible and durable. The unique design of the ice ball maker makes sphere ice cubes easier to release with just a twist. No need to wait for the ice cubes to melt a bit,much more convient than traditional silicone one.

Made of durable stain and corrosion resistant heavy duty polished 18/8 stainless steel

Measures 11-3/16-inches by 4-3/4-inches by 1-1/4-inches

This retro design is inspired by the aluminum ice cube trays from the fifties - lift the lever to break cubes apart and remove with ease

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

EFFICIENT ORGANIZATION - This tool tray provides an optimal organization solution for your wrenches and tools, perfect for toolbox storage or wall mounting.

OPTIMAL STORAGE - The SEDY 26 Pack Metal Wrench Organizer is the ultimate storage tool for wrenches, ensuring your tools are always within reach and easy to find.

DURABILITY GUARANTEED - Constructed from all-metal material, the SEDY wrench organizer ensures high strength and enduring performance, far surpassing plastic alternatives.

【Item Specifications】 MichaelPro’s 3pc Socket Organizer Set- 1/2, 3/8, and 1/4 inch drive socket holders are 15 inches long, lightweight and portable. Easily organize all your sockets on this easy to use socket rail.

【High Capacity】 These socket rails can hold up to 46 sockets, these organizers for sockets are equipped with 16 1/4" clips, 16 3/8" clips, and 14 1/2" clips that secure your sockets under heavy conditions. So versatile that they should go into your toolbox as part of your toolbox accessories!

【Avoid Cluttering】No one likes searching for sockets in a messy workspace. These tool box socket holders organize and protect your sockets from a jumbled mess and getting lost from job to job.