Best Northern Tool Equipment Trailer Springs in 2026

This is the one and only Genuine GORILLA-LIFT.

Makes heavy-duty utility trailer tailgates virtually weightless, allowing them to glide up and down with the slightest touch.

Helps prevent costly injuries and property damages. Helps prevent very heavy-duty, commercial-use tailgates from warping and sustaining hinge damage.

new 3/16" x 48" Grade 30 zinc plated steel trailer safety chain with 2 x S hooks w/safety latches 2pcs.

Item Includes 2 x S hooks with safety latches

Made by zinc plated alloy steel to prevent rust and grade 30 standard .

# OF LEAVES - 4

SIZE - 25.13" L x 1.75" W x 3.25" H

AXLE CAPACITY - 3,500LB

Fits 1-3/4" wide double eye springs.

For 2,000 - 7,000 lb axles. Typically used on 3500 lb signle axles. .

Kit include: 2 x 3" tall hangers, 2 x 2.1" tall hangers, 4 x shackle straps (eye to eye 3.09"), 6 x 9/16"-18 x 3" long shackle bolts and locknuts

For Lippert toy hauler ramp door

R/H coil

Semi-gloss, black powder coated

One New Aftermarket Replacement 4-Piece Trailer Spring Bushing Kit

Fits slipper trailer leaf springs or equalizers

Outside Diameter: 11/16", Fits 1-3/4" Wide Double Eye

Tailgate Assist Kit: Designed to reduce physical strain, this spring loaded mechanism mounts to your trailer's side rail and attaches to the tailgate, taking most of the gate's weight off the user's hands

Secure and Sturdy: Works on most open utility trailers with square or round tubing, a side rail height of 12 to 18 inches and gates up to 180 pounds; Leaves the other side of the trailer open for equipment racks and accessories

More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products, it’s amazing what Buyers Products can do for your truck

One New Aftermarket Replacement Pair Of Trailer Spring Coils Right & Left Hand

4" Long Ears, 1/2" Steel Round Bar, & Fits Over a 1.50" Diameter Shaft

Provides Approximately 90-Degree Deflection

package height : 25.908 cm

package length : 11.938 cm

package width : 23.368 cm

Replacement axle mounting kit

Available sizes: 1.75", 2.375" and 3"

U-bolt design. As an exact-match component, this product will install just like your original equipment

🚚【SPECIFICATIONS】👉[TRUCK/TRAILER CABLE for ABS SAE J2394 - 4/12-2/10-1/8 -65°C/-85°F (Green)] - [AIR BRAKE SAE J1402 A DOT TYPE S 3/8 I.D. (Black)] - [SAE J560 for Plug]; 👉1 Pair Glad Hands; 👉1 PC Tender Spring Kit; 👉4 PCS Gladhand Rubber Seals.

🚚【CROSS REFERENCE NUMBERS】👉15FT 3 in 1 Semi Truck Power Cable Replace for Philips 302171,30-2171,11-8115; Tectran 169157,13S15401; Tremec Sloan 451098,455180DSET; OTR6818; Peterbilt PE13050. 👉Glad Hands Replace for Velvac 035042 / 035045, Tectran 1011EF / 1011SF, Bendix 278850 / 278851, etc. 👉Tender Spring Kit Replace for Phillips 17-145, Tectran 9421-1.

🚚【7 WAY ELECTRICAL CABLE】Our power cord uses the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck. The real high-quality copper makes the cable have good thermal conductivity and electrical conductivity. The durable electrical cable ensures the normal use of lights such as turn signals and brake lights during driving.

Nylon Material

Fits 1-3/4" Wide Springs

For Double Eye Springs & Equalizers

Tech Info: For 3" Axle Tubes / 3" Diameter Round Axles, Raw Steel, Weld-On Installation

Fits 5200, 6000, 7000# Capacity Axles for Round Trailer Boxes

Hole Size: 5/8", Width: 1-7/8", Fits 1-3/4" And 2" Wide Springs

Replacement leaf spring for RV trailer

Available lengths: 21", 24" and 26"

Weight capacity options ranging from 1,000 - 3,000 lbs.

Four (4) New Aftermarket Replacement Trailer Spring Bushing Kit.

Made to Fit Various Models: Nylon Material

Fits 1-3/4" Wide Springs

62" from Hubface to Hubface 48" Spring Center to Spring Center.

4 Leaf Springs

2-3/8" Main Tube

【EXTENSIVE APPLICATION】- The Tracker Tender Kit is used to hold the air lines and power cord, which can tighten these lines and spring plays a role in buffering and protection. And these spring tender kits are suitable for all trucks, semi trucks, trailers and Tractors. Replaces Tectran 9421-2, Automann 177.3007, Tramec Sloan 451748, Phillips 17-1482, Velvac 580071.

【ANTI-SLIP 3-HOLE CLAMP HOLDER 】- 3-Hole Clamp Holder has a special widening design to effectively prevent the washers from sliding, and use it with the locking nut, which can fix the Air Hose and Power Cord very well.

【GALVANIZED CARBON STEEL SPRING】- 20 "Long Spring is made of high quality carbon steel with good elasticity and toughness, which can run normally and have a long service life at high intensity. And the surface of the spring is galvanized, which can prevent rust and corrosion resistance.

4 leaves

27in. eye center

1 3/4in. wide springs with 9/16in. double eyelets

4 leaves with hook

9/16in. I.D.

Black painted finish

Two Bolt-On front spring hangers (14016Ga)

Two Bolt-On rear slipper spring hangers (14017Ga)

Two shackle bolts and nuts

【Easy to Install】Our lift parts have undergone a rigorous testing, state of the art manufacturing to easy installation, just take 30 minutes.

【Fits for】Replacement spring and cable kit fits for trailer tailgate lift. Double spring assembly has a smaller spring inside the larger outer spring. Works just like OEM, half the price.

【Hands Free】Whether you have a tough outside job or are throwing a party in the parking lot, you shouldn't have to struggle with the weight of a tailgate. The tailgate can be easily lifted by one hand with a person, after install our utility trailer accessories, make the tailgate and ramp of the multifunctional trailer almost weightless.

MAIN USAGE：Tin Bronze Bushing Kit for Spring Eyes；

MAIN PARAMETER： Inside Diameter: 9/16" , Outside Diameter: 11/16" , Length: 1-3/4" ;

ADVANTAGE：Tin bronze bushings are more wear resistant , Longer Lasting than Plastic Bushings ;

Replacement axle AP kit

Available as a tandem or triple axle kit

Choose from standard or wet bolt assemblies

4 x 3 1/8" Shackle Straps

4 x 9/16" Nylon Bushings 1.75” wide .5625” ID .6875” OD

6 x 9/16"-3 x 3" Long Shackle Bolts

2 x 12" Electric Brake Magnets

FOR UP TO - 7,000 LB trailer brakes

WILL INCLUDE - 2 retainer clips, and 2 coil springs

[High Quality Material] Made of high quality tin bronze material.

[Wear-resistant and durable] Compared with plastic bushings, it is more wear-resistant and has a longer life.

[Accurate size] Length 1-3/4 inches, Inside Diameter 9/16 inches, Outside Diameter 11/16 inches.

【DURABLE SPRING】The 25" Heavy Duty Spring is made of high quality carbon steel with good elasticity and toughness, which can run normally at high intensity. And the surface of the spring is galvanized, which can prevent rust and corrosion resistance, and have a long service life.

【PROTECTIVE COVER】The high quality plastic protective sleeve can effectively prevent the inner spring from being exposed to the sun and rain, with no dusting and scratching. It also effectively prevents the spring from winding with other wires and air hoses.

【ANTI-SLIP CLAMP HOLDER 】The 3-Hole Clamp Holder has a special widening design to effectively prevent the washers from sliding, and use it with the locking nut to ensure better working performance, no loosening or falling off.

One New Aftermarket Replacement Trailer Axle Single Hanger Kit for Double Eye Springs

Designed for Use on Trailers with Single, 2,000 to 7,000 lb Axles

For Use with 1-3/4" Wide Springs - Attaches 2 Leaf Springs to Your Trailer Frame

Trailer Breakaway Cable: Provides a safer and more effective connection to your trailer, because it doesn’t rust, fray or become damaged while towing which keeps you and your trailer safer when towing

Sturdy&Durable: This cable is made of woven steel and wrapped with UV-resistant PU material, anti-corrosion, durable, sturdy, and not easy to break.

Flexible Coiled Design: The spiral design can protect the breakaway cables from dragging on the ground, extending to 4 feet.