Best Folding Truck Tonneau Covers in 2026

Fits 2014-2018, 19 Ltd/Legacy Chevy/GMC Silverado/Sierra Limited/Legacy, 2014 1500, 2015-19 ALL 8' 2" Bed (97.8")

100% BED ACCESS | The low-profile BAKFlip G2 hard folding cover allows you to drive with the cover fully closed, folded, or flipped up without covering the 3rd brake light

ENHANCED SECURITY | This cover features durable aluminum panels and an automatic latching system, providing greater security over vinyl covers. The G2 is operational from either side of the truck bed with quick-release cables under the panels

Fits 1999 - 2014 Ford F-150 Passenger Side

TRUCK BED COVER COMPATIBLE ; The UnderCover SwingCase maintains a 3-inch clearance from the truck bed and works with virtually all tonneau covers: soft, hard, folding, and rolling

ULTIMATE ACCESSIBILITY ; This toolbox swings out nearly 180° towards you for easy access from the tailgate and swings back into a locking position over the wheel well for maximum bed access

Fits 2009-2018, 2019-20 Classic Dodge Ram 1500/2500/3500 8' Bed (96")

E-Z clamping system locks down the cover from the inside, securing your belongings from the elements and any on-lookers

Powder-coated aluminum frame is sturdy but lightweight enough for one-hand use

🚗 Truck bed Compatible for 2015-2023 Ford F-150,Only for Styleside 6.5' Feet Bed

🚗 Easy Installation, all required harness are included. No Drilling and Further modification. Installation manual included. 1 Pcs of Stick Touch Lamp Included

🚗 High Quality: Quad Fold Truck bed is made by double sided tear-resistant vinyl with heavy duty aluminum powder coated frames. It has 4 horizontal crossbars to ensure security and stability.

Fits 2014 - 2018, 2019 Legacy Chevy/GMC Silverado/Sierra 1500 5' 9" Bed (69.3")

KEEP IT SIMPLE | Easy to install & easy to operate. Two EZ-Lock clamps located at the tailgate keeps cover locked. Pull down each clamp, fold cover twice, buckle to the cab & go. Entire cover can be easily removed in minutes to haul that brand new sofa

DURABLE TARP COVER | Trifecta 2.0 is constructed with a leather-grain fabric built to deflect water and guard your truck bed from the elements. This marine grade material is fade resistant with excellent tension. Tackle the highway without any flutter!

Fits 1999 - 2006, 2007 Classic Chevy/GMC Silverado/Sierra 5' 8" Bed (68.4")

EXTRA TOUGH | Get a cover that’s going to last! This tri-fold truck bed cover has a tear-resistant, double-sided vinyl fabric that sits on top of a corrosion-resistant aluminum frame to withstand daily wear and tear while keeping your cargo protected

EASY-TO-FOLD DESIGN | Simply unclamp at both sides of the tailgate to unlock this lightweight truck bed cover and access your gear. An integrated clip and strap system secures your tri-fold cover at the cab to fit and haul larger cargo with ease

Fits 2015 - 2022 Chevy/GMC Colorado/Canyon 6' 2" Bed (74")

DUAL PROTECTION | Heavy-duty, marine-grade vinyl sits on top dent & scuff resistant aluminum panels for dual action bed protection. These aluminum panels are strong enough to withstand 350 lbs of evenly distributed weight, designed to keep your gear safe

EASY-LOCK HANDLES | The Hard Fold's simple clamping system offers instant access to your cargo. To open this cover, just unclamp each spring-loaded tailgate handle and fold the cover forward. Securely lock at the cab with nylon strap and hit the road

【FITMENT】This CAPSER truck bed cover Compatible with 2015 2016 2017 2018 2019 2020 2021 2022 2023 Ford F150 Styleside 6'6"(78") Truck Bed.

【PREMIUM MATERIAL & MORE SECURITY】Made of reinforced, commercial grade vinyl, Our F150 78 inch tonneau cover is engineered to be resistant to water, snow, sunray, dirt and dust. Ultra strong safety clamps and additional easy-adjust cover buckles for more security. Protect your tonneau cover from sliding or blowing off while driving.

【FAST & EASY INSTALL】Comes completely assembled. NO tools, NO assembly, NO drilling required! Just position the cover on the truck bed covers 6.5 ft bed, simply clamp the rails on and that's it.

Fits 2014 - 2018, 2019 Legacy Chevy/GMC Silverado/Sierra 1500, 2015-18 2500/3500HD 8' 2" Bed (97.8")

ULTRA-TOUGH PANELS | Solid Fold 2.0 is a hard folding truck bed cover armed with lightweight, automotive grade polymer panels. Dent and scratch resistant, and takes UV rays like a champ. From cinder blocks to groceries, these panels can handle it all

ARRIVES FULLY ASSEMBLED | The whole cover comes completely put together allowing for a quick and easy install. Tighten the two cab clamps to your truck bed, unfold the cover to the tailgate & pull down on the EZ-Lock tailgate clamps to lock in place

Perfect Fit: YITAMOTOR hard folding tonneau cover is custom-built to ensure precise compatibility with 6.4’ bed of 2019 2020 2021 2022 2023 Ram 1500 New Body Style, Fleetside Standard Bed w/o Rambox, Split Tailgate and Bed Track System

Tough Aluminum Panels: High-density aluminum plate design grants cover 400lbs load capacity, scratch resistance, and anti-theft protection; Enjoy all weather protection that repels weather elements like UV damage, snow, water, and corrosion for prolonged durability

Functional Elevation: The upgraded hard quad fold tonneau cover enjoys functional benefits, from three hinged connection & folding alongside nylon strap securing to leave greater bed space compared with tri-fold covers, to a premium aluminum frame and clamps that render immense stability and security

🚗 Truck bed Compatible for 2019 2020 2021 2022 2023 Ford Ranger with 5 FT(60.5 Inch); 1 Pcs of Stick Touch Lamp Included 🔴Note🔴 If the end of truck bed is too short for third clamp, customer may need extra "Z" shape metal

🚗 Easy Installation, all required harness are included. No Drilling and Further modification. Installation manual included.

🚗 High Quality with 3 Mounting Point: Quad Fold Truck bed is made by double sided tear-resistant vinyl with 3 heavy duty aluminum powder coated frames. It has 4 horizontal crossbars to avoid air lifting issue.

FITMENT: DNA MOTORING Vinyl Soft Top Tri-Fold Tonneau Cover is Compatible with 2020-Present Jeep Gladiator 5.5 Ft Bed. Only Fits Models without Utility Track System

PLUG & PLAY: Easy to Install With Included Clamps. Adjustable Tension for the Perfect Fit. No Need to Cut or Drill into the Truck Bed, the Preassembled Unit Making the Installation Easier than Ever. Note: Vehicles with a bedliner installed may require modifications to install this product

INCREASE SPEED & SAVE GAS: Increases Trucks Aerodynamics at Speed. Gas Saving Benefit from a Covered Bed. Rubberized Edges to Seal. Bungie Cord Hook to Secure Down to Drive with Open Bed. Attached Aluminum Frame

Perfect Fit: This soft tonneau cover Perfect Fits 2019-2023 Ford Ranger 5 Feet bed New Body Style

Sturdy: KSCPRO Tri-Fold bed cover has 3 built-in horizontal crossbars offering good support when fully unfolded the cover. Heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing protect your cargo in any weather condition.

Durable: It is composed of double layer vinyl which has been thoroughly tested for UV protection and superior tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for trouble-free installation and formidable stability.

Fits 2021 - 2023 Ford F-150 5' 7" Bed (67.1") NEW! Precisely engineered for compatibility with Ford's unique truck bed and its automatic tailgate feature

TOUGH TRUCK BED PROTECTION | The Gator EFX Hard Tri-Fold is constructed of heavy-duty aluminum panels that automatically lock when closed. Panels are coated with a scratch-resistant, UV-protective, black powder coat finish.

EASY INSTALL & LOW-PROFILE DESIGN | The EFX tonneau cover can easily be installed in less than 30 minutes, without the use of tools or need for drilling. EFX sits flush with your truck bed, providing a stylish low-profile look.

Fitment：Fitment:2014 2015 2016 2017 2018 2019 2020 2021 2022 Tri-Fold Tonneau Cover replacement for Chevy Silverado GMC Sierra 5.8 FT Bed.

Material Tarp: Made from High Hardness, High Bending Strength, High Tensile Strength PP(15mm) Honeycomb FRP(1.5 mm) Panel; Rails/Frame: Aluminum; Load-Bearing Capacity of Sheet Metal ≧ 350pounds.

Design Advantage:A water-tight channel hinge system. Hard polymer rubber corners, hinge caps and snap-on seals, Withstand all climate conditions, sealing with windproof rain strip, waterproof, snow proof and dirt proof. also provide maximum security and concealment of your goods.

Fits 2009 - 2023 Dodge Ram 1500 5' 7" Bed Without Ram Box (67.4")

STYLISH SHINE FINISH | Toptiny Featuring shine-finished aluminum panels, protecting against marks, scratches and UV damage; as well as premium upgrades to the perimeter seals and hardware

SECURITY | The Toptiny hard fold is fully locked once your tailgate is closed

Fits 2019 - 2021 Chevrolet Silverado/GMC Sierra 1500 (does not fit Carbon Bed) 5' 10" Bed (70")

ULTIMATE DURABILITY The ArmorFlex hard folding cover has durable, matte-finished aluminum panels with a patented LINE-X coating to help prevent dents, dings, & scratches for superior protection in extreme environments.

ENHANCED SECURITY & FUNCTIONALITY This cover’s automatic latching system locks each panel in place with releases on either side of the bed for easy operation. Its dual-action tailgate seal allows you to shut the tailgate without lifting the cover first.

3 Panel Hard Folding Cover Provides Front Opening & Rear Fold Up

Features BOLT Lock To Match Your Ignition Key

Hinges are Ultra Strong & Water Resistant

*Shipping: Stock in US,Low-Profile, Sturdy,Easy 30-Minute Install,Waterproof; Come with Install tool and led light. Lubricant Not Included. Electric Can be Stop in anywhere.

*Fit For 2005-2022 Ford F-150 Super Crew & Super CabStyleside 5.5ft Short Bed Models (Incl. Raptor Series). Please measure the length of your truck bed and make sure you have the correct model before ordering!

*Only fit 5.5 Feet (67,1 inch) bed without utility track system. Not fit Flareside body style. How to install ? Please check the video on the listing.

Tri-folding, soft Tonneau cover design

Quick and easy install or removal, no tools required

Strongest frame of any soft folding cover, yet lightweight

Fits : 07-12 GM SILVERADO/SIERRA 6.5 FT Without Tracking System

Tri-folding, soft Tonneau cover design

Quick and easy install or removal, no tools required

【Fitment】:Silverado/Sierra 1500,2500,3500,DODGE Dakota Ram 1500,2500,3500.F150 F250.Raider.Titan.Tundra tacoma.gladiator

【Effect】Replace damaged tonneau cover clamp，example: Hard Quad-Fold or Hard Tri-Fold or Soft Quad-Fold or Soft Tri-Fold Truck Bed Cover and so on. For more possibilities.

【Material】: Made of premium plastic and 304 stainless steel for strength durability no rust and stability.

Fits 2015 - 2022 Chevy/GMC Colorado/Canyon 5' 3" Bed (62.7")

PREMIUM-GRADE VINYL | This soft-folding truck bed cover has a durable topper that keeps your goods safe from all elements. Its OE quality perimeter seals & overlapping cab dust seal keeps dirt and moisture out of your truck’s bed

VERSATILE BED ACCESS | When this cover is closed, an LED lighting system illuminates the bed for maximum visibility to your gear. For access to all of your cargo, simply unlock both tailgate clamps & fold twice towards the cab. Secure & hit the road

Fits 2009 - 2023 Dodge Ram 1500 5' 7" Bed Without Ram Box (67.4")

Protects your cargo from the elements: The Calffree hard fold tonneau cover is made of durable, weather-resistant materials that keep your cargo safe from rain, snow, and other harsh weather conditions.

Easy to install and remove: This tonneau cover features a simple, hassle-free installation process that can be completed in minutes. When you need to access your cargo, simply fold the cover back and your items are easily accessible.

Tri-folding, soft Tonneau cover design

Quick and easy install or removal, no tools required

Strongest frame of any soft folding cover, yet lightweight

【Fitment】Our hard tri-fold truck bed tonneau cover fits for 5' 2019-2022 Gladiator JT truck bed

【High quality fiberglass】The hard folding tonneu cover is 100% brand new and made of fiberglass and PP Honeycomb, Hardness of FRP ≧ 30HBa, Compressive Strength of PP Honeycomb ≧ 1.4MPa, can withstand 2 tons, which is more scratch resistant and stronger than aluminum alloy. And obtained the US Design Patented.

【Easy to install】It is easy to install the tonneu cover. No drilling need. Simply fold from front and back, then lift up and off to gain full use of truck bed, the whole cover comes completely put together. The installation process only takes a few minutes. What's more, we also provide the installation instruction and mounting hardware.

Included:2pcs* Rear Clamp/Wrench, 2pcs* T-Bolt, 2pcs* Slider for T-Bolt.

Fitment: Fits Hard Tri-Folding Truck Bed Tonneau Cover or Hard Four-Folding Truck Bed Tonneau Cover.Not for Low Profile Hard Folding Truck Bed Tonneau Cover.

Materials: Made of Nylon glass fiber（PA66 GF30） and stainless steel, durability, and stability.T - Bolt welding part, well-made, firm, and reliable, not easy to break.

1

2

3

Tri-folding, soft Tonneau cover design

Quick and easy install or removal, no tools required

Strongest frame of any soft folding cover, yet lightweight

Contents :2 * Diamond Nut, 2 * Front Clamps, 6 * T Bolt slider,4 * Rear Clamp.

Material：Made of nylon glass fiber (PA66 GF30) and stainless steel, durable and stable. T - bolt is welded, firm and not easy to break.

Fitment: Fits Hard Tri-Folding Truck Bed Tonneau Cover or Hard Four-Folding Truck Bed Tonneau Cover.Not for Low Profile Hard Folding Truck Bed Tonneau Cover.