Best 7 Vehicle Floor Jacks in 2026

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Includes Two Double Locking Jack Stands: IT COMES WITH 2 PACKAGES. The heavy-duty jack stands safely support up to 6000 lb., They are constructed with heavy-duty, solid steel body panels and welded-in reinforcement braces for added strength and durability. These jack stands feature an easy-to-use ratcheting system to make quick height adjustments lift height of 12-13/32 in. to 17 in., and double-locking mobility pins for extra safety and security.

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has a 3-ton/6,000 lb. lifting capacity with a 3-7/8 in. to 19-1/2 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Jack it Up: With 3 tons/6600 lbs strong loading capacity, VEVOR's 3 ton floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 3-6/11"/90 mm. Max. Height: 19-11/16"/500 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process.

Light But Sturdy: Boasts heavy-duty steel and durable aluminum construction, VEVOR low-profile floor jack is sturdy to use and light to carry. It is equipped with 4 wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the armrests on both sides is convenient for carrying and positioning.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.

LIFTING CAPACITY: 4,000 lbs.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

[100% LIGHTWEIGHT ALUMINUM] - Weighs only 58 pounds which is lightweight for easy portability.

[DUAL PUMP PISTONS] - Dual pump system for quick lifting (7 strokes to top under no load). Lifting range 3 3/4" - 19 1/4"

[VEHICLE PROTECTION] - Designed with a foam handle bumper to protect vehicle from damage

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles

▼ Match & is used compatible with Mercedes-Benz parts # 2039970186, 203 997 01 86, W164 W221 W216 W251, 1646900509, 2219980050, 164 690 05 09, 221 998 00 50. jack pads / supports.

▼ CNC machined from solid structural billet aluminum + red resistant and weathering anodized.

▼ Prevents rocker panel and jack point damages while jacking up your Mercedes-Benz at factory jack points. Does NOT touch or harm any painted surface of your vehicle.

Capacity - 3 Ton (6000lbs), and Lift Range - 6 in. - 21.5 in.

Adapter included increases the overall max lift height by 7.75 in.

Bottom skid plate to keep the jack stable

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

1 YEAR WITH SUNEXPRESS: Get in the express lane with the industry’s leading program and exchange warranted products directly with Sunex.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.

RAPID RISE TECHNOLOGY: Dual pump pistons quickly raise the floor jack saddle to load.

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle

[Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle

[Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle

Fit for: Camaro jack pads for the 6th gen except convertible

Installation: No drilling required,Easy install

Advantages: These are angled as to not bend the pinch weld as the car is lifted by a floor jack.so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

Racing floor jack can be used for general or specialty use and features a 2 ton (4,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-9/16" to 17-5/16" allows you can gain easy access under low-profile vehicles

👍The steel construction of the car jack makes it strong and sturdy. It has a lift range from 3.5 to 13.95 inches, so it gives you plenty of room to get the job done, whether you are changing the tire on a low slung sports car or a truck that is higher off the ground.

👍Make sure you are always prepared for an emergency tire change with the 2.5 Ton Low Profile Floor Jack Swivel Wheels 5000 Lb Car Truck Tire Change Lift.

👍It can easily be stored in the vehicle without taking up much room. The low profile design means that it is just what you need for a lower load.

EASY TO USE: Aluminum and steel hybrid construction makes the jack lightweight and easily portable at 64 Lbs. Side rail handles makes the jack simple and easy to position. Rear swivel casters for quick maneuvering.

SAFETY: Integrated overload and by-pass safety valve prevent use beyond rated capacity and over-extension. EVA padded handle provides vehicle protection when jack is lifting.

ADVANCED ENGINEERING: Fully robotic welded oil pump and forged base eliminate oil leakage. Dual pump for quick and efficient lifting speed.

UNANIMOUS 5-STAR REVIEWS ACROSS ALL RIVIAN FORUMS - With our firsthand experience as proud Rivian owners, we've garnered a substantial following and overwhelming support in all the major Rivian forums

ORIGINAL MAGNETIC TOP RIVIAN JACK PUCK - designed in Arizona by an R1T owner just like you

COMPATIBLE WITH ALL STANDARD FLOOR JACKS AND COMMERCIAL VEHICLE LIFTS - This tested and trusted design is effective in both commercial tire changing facilities and can also be used at home with a floor jack, making it ideal for DIY enthusiasts

【Material】：Machined from solid 6061 grade aluminum and anodized red, bolt on jack pads to be left on the car while driving.

【Fit for】: Camaro jack pads for the 6th gen，except convertible.

【Advantages】:The jack are angled as to not bend the pinch weld as the car is lifted by a floor jack.so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel.

3-1/2 Pumps Lifts Most Work Loads

Lightweight, compact design takes up less space on your shop floor, easier to transport

Constructed for professional race teams out of precision-machined, high strength, aircraft aluminum billet

Precision machined from billet 6061 aluminum, providing a precise and stable lifting solution

Built-in neodymium magnets securely attach the pucks to your vehicle, making alignment, installation, and removal quick and easy.

Hard anodized for added wear resistance, ensuring long-lasting durability and protection against corrosion.

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

EFFORTLESS LIFT: With a lifting range of 3.35"-13.98", our 2-ton floor jack makes it easy to get under even low-profile vehicles. It's ideal for cars, trucks, SUVs and a variety of other lifting support needs

LIGHTNING-FAST LIFT: The dual pump pistons of our floor jack provide rapid raising so you can quickly and easily achieve the desired height for your vehicle

HASSLE-FREE MANEUVERING: This floor jack includes 2 360-degree swivel casters, making it effortless to maneuver and transport

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability; Convenient side handle makes it easy to carry

This Big Red low profile floor jack’s lifting height ranges from 3-15/16" to 18-5/16" , which allows you to gain easy access under low-profile vehicles.

The aluminum floor jack is constructed of durable, high-strength aluminum and steel; A dual-piston quick-lift pump allows you to easily raise a 3 ton floor jack to the desired height. The aluminum and steel construction makes the floor jack lighter and easier to carry and operate than a regular jack.

Car jack hydraulic can be used for general or special purposes with a capacity of 3 tons (6000 pounds)