Best 40 Water Pipe Fittings in 2026

PEX Kit includes 10 - 1/2 Inch PEX Elbows 90s, 10 -1/2 PEX Inch Tees, 10 – 1/2 Inch Straights Couplers

Made from Lead Free brass which means you can use on potable domestic water lines (washer, sink, shower, etc..) and for radiant heating applications. Highly dezincification resistant or corrosion due to high quality brass. Universal Plumbing Code compliant with AB1953

Easy to install, only need a Crimp/Cinch tool, PEX ring, PEX fitting and PEX pipe. View video for instructions. No glue, flames, solder or bonding agents. Easy installation for potable and radiant applications.

1/2 INCH PIPE FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to take your project to the next level. These fittings are for decor and DIY projects only, they are not rated to carry gas or water.

SUPPORT AMERICAN BUSINESS - We live and sell in America, please help support our USA small business. We always go the extra mile for our awesome customers.

INDUSTRIAL DECOR- Our 3 hole flange is 2.5 inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial, steampunk, vintage, retro, factory look, our flange will fit perfectly into your project. Most other flanges have 4 holes, our design sets us apart while providing a strong triangular mounting configuration which spreads out the payload evenly

This faucet connector supply line is made from tough stainless Steel wire, making it exceed all agency requirements for flexible water connectors

This product adds a great value

This product is manufactured in MEXICO

✔️【 Lead Free Non-Pollution Compliant Brass 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Suitable for new or retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【Compatibility & Applications 】: Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System. This brass crimp fitting can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

SURE-VENT PVC AIR ADMITTANCE VALVE: Provides the ideal venting solution for island sinks, remote bathroom groups, and remodel jobs by eliminating the need to be connected directly into the stack vent

EQUALIZES PRESSURE: Keeps the sewer and atmospheric pressures equalized, allowing water to drain freely

ONE-WAY VALVE: Allows air to enter the plumbing drainage system when negative pressures develop without the use of a vent extended to open air and to prevent sewer gases from escaping into the building

Durable Material: made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use.

Powerful function: Adopts an open inner and outer ring structure and fastened with bolts. Smooth surface, torsion-resistant and pressure-resistant, tightly locked and large adjustment range. Provides an excellent seal with a variety of hose materials, effectively solves the problem of liquid and gas leakage of the hose.

Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipe, cable, tube, automotive, industrial, boat, etc.

Durable Material: made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use.

Powerful function: Adopts an open inner and outer ring structure and fastened with bolts. Smooth surface, torsion-resistant and pressure-resistant, tightly locked and large adjustment range. Provides an excellent seal with a variety of hose materials, effectively solves the problem of liquid and gas leakage of the hose.

Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipe, cable, tube, automotive, industrial, boat, etc.

Hex bushing for connecting two pipes with different diameters

1/4" Male NPT threads on one end and 1/8" female NPT threads on the other for connecting pipes with different ends

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

{APPLICATION}:Universal filter hose washers kit used for bathtub faucet shower hand held hose,garden hose splitter,washing machine water supply line strainer filter,outdoor spigot adapter leaks repair replacement

{SIZE}:Rubber filter and silicone filter washer assortment kit,OD:24mm, 19mm,used to install all standard 3/4",1/2" pipe fittings or 5/8"washing machine connector,packed in a sturdy plastic box and with a clear label for easy use

{STYLE}:The filter washers set are made of 304 stainless steel and quality rubber,the raised screen filter gasket has filter made of 40 mesh screen to filter sand and gravel to reduce the possibility of nozzle clogging, serves as a flow restrictor can reduce the waste of water effectively

DECORATIVE 1/2 INCH FLOOR FLANGES: Our newly designed PIPE DÉCOR floor flanges are the perfect choice for all of your DIY design needs. These flanges have the same industrial look and feel as traditional plumbing flanges but were designed with decorative applications in mind. They are slightly smaller and lighter than authentic industrial flanges, but still retain the same vintage aesthetic. Accentuate your space no matter what your style is.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choice with Pipe Décor fittings. Make custom industrial shelves to mount to your wall, towel bars, lamps, coat hooks, tables, desks, and much more. Whatever you can imagine you can create. Showcase your own unique sense of style and design.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 M12FLG10PK.

【RELIABLE PEX MATERIAL】- Amount: 2 rolls; Color: Red / Blue; Nominal Diameter: 1/2"; Total Length: 100ft. Made of excellent PEX material, this non-barrier PEX pipe is non-toxic, maintenance-free, and anti-aging. Fit for potable water or radiant floor water projects and keep quick & uninterrupted hot/cold water flows.

【SUPERB SEALING】- Compatible water temperature:-40℃ to 95℃. This non-broken 1/2" PEX tubing can tackle different weather circumstances, no matter the high temperature or cold days, to ensure the integrity and safe use for longer life expectancy.

【PREMIUM FLEXIBILITY】- Manufactured with min.5" bending radius, this pex tube is easy to bend for different ground situation. Pressure rate: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F. PEX material ensures its crack & leakage-proof features.

AUTHENTIC 2 INCH PIPE FLANGES: Our Pipe Décor 4 pack of genuine malleable iron threaded floor flanges are the perfect choice for your DIY needs. Our flanges are the very same quality as those found in your local hardware store but sold for a fraction of the price. Multipack quantity gives great value. Each flange comes with four screw holes allowing you to secure your flange to floors or walls of virtually any material.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choosing with Pipe Décor fittings. Make custom industrial bar furniture, table legs, chairs, shelves and more. Whatever you can imagine you can create.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including: steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 2FLG4PK.

3/8" NPT Male (Actual O.D: 0.675") x 1/4" NPT Female (Actual I.D: 0.440")

Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter

Max. Pressure: 1000 PSI WOG; Temperatures range from -65 to 250 F

【PREMIUM Liquid-Tight Conduit】- Length :25'，ID：3/4inch，OD：1inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is constructed with Resists corrosion PVC to ensure quality and service life.

【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings

【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial,50% lighter than metallic conduits

【APPROVED TO USE】: SUNGATOR push pex fittings are Certified and listed to ASSE 1061, NSF/ANSI 61; SUNGATOR plumbing fittings meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with SUNGATOR push fittings and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR push pex plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

Type:1/2" Od x 3/8" NPT Male Push to Connect Fittings; Body Style: Male Straight

1/2 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing)

3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

Type:1/4" Od x 1/8" NPT Thread Push to Connect Fittings; Body Style: Female Straight

1/4 inch Air line Fittings Fluid Admitted: Air, Water (No Freezing)

1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

✔️【 Lead Free Non-Pollution PPSU polyphenylsulfone Material 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Poly Alloy pex Fittings are suitable for domestic water or radiant heating system, also used retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【 Applications 】: This Poly PEX A expansion fittings can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

PIPE TYPE: black pipe 3/8" x 3 feet male (NPT) National Pipe Thread taper made of superior rough caoting steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

PIPE Type: black pipe 1/2" x 1.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

Type:1/4 Od x 3/8" Npt Thread Push to Connect Fittings; Body Style: male 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility

1/4 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32～140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

The 3/8 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly

Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT

Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;

Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property

🔧[ Product Type ] —— Barbed Hose Fitting(1/2"Hose Barb x 1/2"Female NPT) ,for industry connecting pipes or fittings with different end types, diameters, or materials.NPT thread size is not the actual diameter, it is only the nominal pipe size.

🔧[ Product Material ] —— High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel.

🔧[ Hose ​Clamp ] —— Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose.

Works in all types of pipe

Natural rubber O-ring for excellent expansion and memory

Works well for plugging water line stub-outs

PUSH TO CONNECT COUPLINGS: Quick Fitting offers a patented design that delivers superior sealing performance and lower insertion force, backed by a 75-year warranty. Our brass fittings are certified lead-free making them safe for water lines and safe for your health. These multipurpose connections are designed for combinations between Copper, PEX, PE-RT, or CPVC tubing.

DIY PLUMBING: Our push-to-connect fittings are built for every job and for every user from professional contractors to even the most inexperienced users. These straight couplings can be used for indoor plumbing, outdoor plumbing, heating repair, marine repair, RV and mobile home repair, and even irrigation.

EASY INSTALLATION: Simply CUT your copper, PEX, PE-RT, or CPVC tubing, then CLEAN the connected surface of burring, then MARK the insertion depth on the tubing, and finally PUSH on the fitting or valve to meet the insertion depth mark. The disconnect is just as simple! Each pack includes a patented Slip Clip release tool allowing for an effortless disconnection - no other tools required!

♥【What You Get】The kit includes six types of fittings:ball valve,straight coupling,check valve,elbow union,tee union,two way divider 5 pcs each,30pcs in total.

♥【Superior Quality】Food grade polypropylene PP material, made of real material, strong structure, safe and durable, quality is very guaranteed.

♥【Special Properties】The connector production step is precise, the structure design is unique, and the interface sealing effect is strong.Anti-cracking material, anti-aging corrosion.

Easy to install on the pipe supply lines. Max. 600 PSI WOG (Water, Oil and Gas).

Inlet&Outlet: : PEX-F1807 side fits 1/2" PEX-a/b/c pipes, compatible with PEX F1807 stainless steel & copper crimp rings and stainless steel press sleeves . NOT compatible with PEX F1960 expansion plastic ring.

100% leaking test in the own factory, Max. working temperature: 80℃(176°F).

[SIZE DETAILS]--Tri Clamp fit for 1.77inch(45mm) / 2inch(51mm) tube OD. Flange Size: 2.5"(64mm). package include: 2pcs tri clamp.

[EASY TO INSTALL]--Sanitary tri clamp is easy tighten thumb tcrew and quick to assemble .Heavy Duty for Water, Oil, and Gas. Fits for all other home brew stuff sanitary fittings sanitary hose connections.

[PREMIUM MATERIAL]--Tri clamp made of 304 stainless steel, it's has strong oxidation resistance and does not corrode. Preventing rust processes for the whole body.

[Is it going to fit?] Before Ordering, Please Watch Our Video Titled "Which Red Disc Seal is right for you?". We Have 3 Options.

[One-Piece Disc] The Red Disc Seal uses a one-piece disc design unlike the competition. With one-piece disc design you don’t have to worry about sealing the disc’s seam. After all, the purpose of the disc is to keep water from penetrating holes and cracks, so, why introduce a new crack by having a two-piece disc?

[Support] Unlike other brands, we are a U.S. based company out of Texas. We are here to support your needs. Please contact us with your comments and questions. [Online Support] Check out our videos on Amazon, “How to install Red Disc Seal”, “Which Red Disc is Right for You?” and “How to Hide Red Disc Seal Under the Spout”

[2 inch Cam Lock Fittings Size] - Type A camlock couplings have male adapters with female NPT threads, 2 inch size.

[Cam Lock Quick Connect] - Cam lock coupling can connect or disconnect a hose or pipe without any requirement of tools.

[Heavy Duty Quality] - Aluminum body material, durability and no contamination, keeping lustrous surface after long service.