Best 40 Water Pipe Fittings in 2026

1/2 INCH PIPE FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to take your project to the next level. These fittings are for decor and DIY projects only, they are not rated to carry gas or water.

SUPPORT AMERICAN BUSINESS - We live and sell in America, please help support our USA small business. We always go the extra mile for our awesome customers.

INDUSTRIAL DECOR- Our 3 hole flange is 2.5 inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial, steampunk, vintage, retro, factory look, our flange will fit perfectly into your project. Most other flanges have 4 holes, our design sets us apart while providing a strong triangular mounting configuration which spreads out the payload evenly

SHARKBITE FROST FREE SILLCOCK: Outside faucet valve features an integrated 1/2 inch push-fit inlet and 3/4 inch garden hose outlet; a shut-off can be found at the inlet of the sillcock to drain the water and provide protection for the valve when freezing

VERSATILE: Push-to-connect sillcocks work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; ideal for working in tight spaces

EASY TO INSTALL: This intuitive SharkBite brass push frost-free sillcock allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs

DECORATIVE 1/2 INCH FLOOR FLANGES: Our newly designed PIPE DÉCOR floor flanges are the perfect choice for all of your DIY design needs. These flanges have the same industrial look and feel as traditional plumbing flanges but were designed with decorative applications in mind. They are slightly smaller and lighter than authentic industrial flanges, but still retain the same vintage aesthetic. Accentuate your space no matter what your style is.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choice with Pipe Décor fittings. Make custom industrial shelves to mount to your wall, towel bars, lamps, coat hooks, tables, desks, and much more. Whatever you can imagine you can create. Showcase your own unique sense of style and design.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 M12FLG10PK.

AUTHENTIC 2 INCH PIPE FLANGES: Our Pipe Décor 4 pack of genuine malleable iron threaded floor flanges are the perfect choice for your DIY needs. Our flanges are the very same quality as those found in your local hardware store but sold for a fraction of the price. Multipack quantity gives great value. Each flange comes with four screw holes allowing you to secure your flange to floors or walls of virtually any material.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choosing with Pipe Décor fittings. Make custom industrial bar furniture, table legs, chairs, shelves and more. Whatever you can imagine you can create.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including: steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 2FLG4PK.

City water connect inlet Hook Up Flange Replace for OE Part Number A01-0169LF, Use For Many Trailer Marine RV Camper Connection to city water hoses.

Specification: Connect to FPT 1/2" threaded pipe on inside, flange Female thread 3"

With check valve backflow preventer in city water hose connection & press-in dust plug as pictured

Easily install without tools - EasyDrain's Flexible P-Trap Pipe is designed to be durable and easy to install, with absolutely no need for tools or expert installation! Simply hand-tighten the included flanges to ensure that you get a proper seal.

Adjustable - Easily adjust your pipe between 13 inches up to 28 1/3 inches to fit any sink environment. The corrugated hose fits 1-1/2 inch sink istallations with a compatible connector that comes in two sizes. 1 ¼ and 7/8 sink drains.

Can be easily removed - Perfectly suited for connecting to your kitchen sink drain, garbage disposal, bathroom sinks, bathtubs and more. Should you run into a clog or need a deep clean, simply remove the p-trap and relief any clogged areas by simply straightening the hose and run water through it into a bucket.

STUB-OUT COVER: Provides an easy and attractive solution for covering rough stub-out water supply pipes

PLUMBING SUPPORT: Wall-mounted cover tube straightens and supports curved PEX pipe

SLEEK DESIGN: Extends 2-3/4-in. from the wall, featuring a polished chrome finish to match existing bathroom hardware

RV City Water Inlet Replacement: Direct OEM replacement of rv city water inlet.

Specification of RV Water Inlet: The rv water inlet connection check valve is with 1/2" NPT male threaded pipe on the inside, 3/4" GHT female threaded pipe on the outside, flange thread is 3" diameter.

RV City Water Inlet with Check Valve: Built in check valve/back flow preventer and easy to install this city water check valve inside your RV's fresh water system, no more leaking when use tank and pump for water and save water for your RV.

[SIZE DETAILS]--Tri Clamp fit for 1.77inch(45mm) / 2inch(51mm) tube OD. Flange Size: 2.5"(64mm). package include: 2pcs tri clamp.

[EASY TO INSTALL]--Sanitary tri clamp is easy tighten thumb tcrew and quick to assemble .Heavy Duty for Water, Oil, and Gas. Fits for all other home brew stuff sanitary fittings sanitary hose connections.

[PREMIUM MATERIAL]--Tri clamp made of 304 stainless steel, it's has strong oxidation resistance and does not corrode. Preventing rust processes for the whole body.

XFITTING For 1/2" CPVC, Pex, and Copper Tubing, (5/8" OD Tubing)

Built-in Sure Grip allows a snug, tight fit around the pipe, providing a rigid setup against the wall surface. It also conceals gaps to maintain a clean and sharp look

The escutcheon plates can be used in a variety of residential and commercial applications and can be installed with water supplies for kitchen faucet, bar sink, toilet, dishwasher, refrigerator, and many more

COMPOSED OF A STRONG MALLEABLE IRON these decorative flanges have the ability to support heavy loads. This Ironwerks Designs plumbing flange is composed of malleable iron and carbon and can be used in any vintage, farmhouse, rustic or country décor setting. They can be used in any DIY project you want to make requiring pipe fittings. This is a 4-hole flange and is stronger, sturdier and more balanced than the cheaper 3-hole flange.

ANTI RUST TREATMENT is applied to this pipe fitting to insure protection from water regardless how much humidity it is subjected to. This makes it great for bathrooms, kitchens and anywhere else water or steam or water may be an issue.

MULTIPURPOSE wall décor can be used to build pipe lamps, floating shelves, hanging racks, pipe clothing racks and many other DIY projects. These metal décor pipe fittings for the do it yourselfer can also be used in attaching bookshelves, making tables, tv stands, bed frames, lamp lighting and much more. They can be used both indoors and outdoors.

The tapered trim cover is used to trim the unsightly surface when the pipe runs through the wall, keeping the appearance clean.

Specifications: Dimensions inner diameter 17mm/0.66 inches, outer diameter 56mm/2.2 inches, height 32mm/1.26 inches.

Made of stainless steel thickened, polished and electroplated, it is corrosion-resistant and durable.

3/4"Female bulkhead connector for water tank, water inlet and outlet, and self-made water storage barrels.

Bulkhead OD 31mm, suitable for about 31.5mm ID hole, the length of this thread portion about 25mm (not counting the mounting flange)

Can be mounted in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets. Bulkhead design to make the fitting easy through holes without leakage.