Best 2 Weld On Hinges in 2026

MATERIAL - Our heavy duty hinges are Matte black coating and durable thick steel material giving it a longer service life and anti-rust features

EASY TO INSTALL - Welding required for installation, better remove the black powder coat on the mounting plate before welding

LOAD CAPACITY - 7" Barrel Style 900lb load Capacity weldable hinges are Hollow cylinder shaped, perfect for a 90 degree hard swings or more depending on the installation

Bobco Metals 4" Heavy Duty Weldable Hinges are made of good quality steel that is durable, sturdy, and long-lasting use. It is easy to use, perfect for high-stress applications, such as holding up heavyweight gates, doors, and more.

These weldable hinge plates are 1/4" thick and weighs 1 lbs each. They are designed to connect the gate to the post, and typically are used where a hinge must be welded to another metal surface. Moreover, when a heavy duty drill bit is used, they can have holes drilled in them for screw mounting.

Weld-on hinges won’t have to use screws or other fasteners. Also, these hinges are suited for permanent applications than bolt-on hinges. They provide more strength and security and a good choice for your gates, trailers, door, or for tailgates. Thus, making the installation easier.

MATERIAL: The door hinge made of cold rolled steel, strong and corrosion-resistant

SIZE: Total length is 5 inches, barrel diameter is 1.2 inch and pin diameter is 1 inches, mounting plate gap is 1.2 inches; each gate hinge can easily hold up to 450 lbs

Matte black coating and durable thick steel material giving it a longer service life and anti- rust features.

MATERIAL: Our barrel gate hinge is made of high quality standard steel AISI 1045, rather than made of weak iron steel or powder steel. These hinges are covered black electrostatic powder coating, rust and corrosion resistant, precise processed by machine, sturdy and durable

SIZE: Total length is 7 inches, barrel diameter is 1-3/8 inches and pin diameter is 3/4 inches, mounting plate gap is 1-1/2 inches

LOAD CAPACITY: Each gate hinge loads up to 2200lbs, 1 Pair total load capacity 4400lbs, preventing the gate from sagging

Door & window locks: The Burglabar is a unique self-locking hinge lock designed to offer additional home security from a patio door or sliding window. Our sliding glass door lock and window lock keeps you safe and can be used to child proof your home.

Safety at home: Our window and door latch lock provides additional safety while you are home and keeps your home safe when you are not. The Burglabar is also a great door safety lock for kids keeping your little explorers safely inside.

No tools needed: Our Burglabar installs quickly and easily without tools and its crystal-clear design blends in with your decor. When mounted out of reach from small children the BurglaBar keeps windows and doors shut for child safety.

HEAVY DUTY GATE HINGE PAIR is suitable for heavy swing metal gates.

WELD ON INSTALLATION for superior strength and dependable operation.

STRONG AND DEPENDABLE HINGES are made of powder coated cold rolled steel for extra durability.

Weldable Solid Steel Heavy Duty Butt Hinges 5" x 5" - 2 1/8" Leaf with a tight 3/8" pin

Extra Heavy Duty - Non-Swaged Surface - Narrow Width

Each hinge weighs 3.5 lbs.

Material - Heavy duty weldable barrel hinges crafted from carbon steel Q235B with an unfinished surface treatment.

Size - 2” (50.8 mm) length, 3/4” (19.05 mm) width, 7/16” (12 mm) diameter of pin, 500lbs load capacity.

Silent and Smooth - Pin bearing (diameter: 7 mm), pre greased providing a smooth 360-degree low friction rotation.

4 Pcs Weld-on door hinges

carbon steel Q235B, unfinished.

Size: 5 x 2-3/8 inch (L x W) / 125 x 60 mm

900 lbs capacity per pair

Features grease zerk fitting to keep the internal ball bearings lubricated

Total Hinge Measures: 6-7/8" x 1-3/4"

HEAVY DUTY GATE HINGE PAIR is suitable for heavy swing metal gates.

WELD ON INSTALLATION for superior strength and dependable operation.

STRONG AND DEPENDABLE HINGES are made of powder coated cold rolled steel for extra durability.

It is very suitable for freight trucks, dump trailers, horse trailers and other doors.

5-3/8" overall length. 4" overall width. 2-1/4" plate width. 1/4" thickness.

Made of heavy steel, durable and corrosion resistant. Suitable for outdoor use.

What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs

Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time

Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want; These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached

Set of (4) 4.5" Raw Steel Weld On Butterfly Hinges.. Integrated Grease Fittings...

Heavy Duty Steel Hinges for Weld On Applications...

Generic Hinges Attach Ramps, Doors and Folding Parts...

Pack Size: 4 Pack, Material: Heavy Duty Steel

Mount Type: Weld on, Style: Short Leaf Strap Style

Overall Length: 5-3/8" , Overall Width: 4 Inch

MATERIAL - 2 hinge pack of 100% stainless steel lift off Hinge 3 inch 75 mm Length x 50mm Width, Left side, SS pin is slightly Grind on top, so that your door fitting of hinge become Effortless.

DIMENSIONS - Thickness of hinge flap is 1.65mm approx & outer pin size 7.5mm approx.

ARCHITECTURAL QUALITY- Each hinge is Machined for precise installation and smooth movement.

Size: Total length is 5 inches, barrel diameter is 1-3/8 inches, and pin diameter is 3/4 inches, mounting plate gap is 0.6 inches.

Heavy Duty Barrel Gate Hinges: The gate hinges are made of cold rolled steel, strong and corrosion-resistant, giving it a longer service life.

Easy To Install: Welding required for installation, better remove the black powder coat on the mounting plate before you welding.

Material: Steel

7-1/8" length

7/8" thickness

【High Quality Materials】:The heavy duty gate hinges made of durable thick cold roll steel,whinch can hold up to 480 lbs capacity.rust and corrosion-resistant

【Size】:Total length is 5 inches and barrel diameter is 1 inch,mounting plate gap is 0.89 inches and pin diameter is 5/8 inches

【multi-function】:The door hinges is very suitable for heavy swing doors, trailer doors, barrel doors, and can support the gate well to prevent the gate from sagging

Exterior Part Type: Door Hinge

The whole hinge is 9" long

Each individual flap on hinge is 3" long and 0.20" thick

PRODUCT DETAIL- 2 pieces 100% stainless steel door hinges 4" inch x 4" inch square 1 inch = 25mm, thickness 2.5mm 5 knuckles

INTENDED USE - Manufactured with no holes and can easily be welded onto gates, dumpsters,and industrial applications such as bins or warehouse doors .

EXTREMELY COST EFFECTIVE- Priced at nearly half off the name brands while not sacrificing on quality standards.

5" barrel weld plate 600 pound weight capacity per pair, measurements: barrel diameter x length x width 1" x 4-13/16" x 1-3/8" weld plate size 2-1/8" x 1-1/8". 3/8" thickness

5" barrel no weld plate 550 pound weight capacity per pair, measurements: 1" barrel width, 4" length

7" barrel weld plate 900 pound weight capacity per pair, measurements: barrel diameter x length x width 1-3/8" x 6-7/8" x 1-3/4" weld plate size 3-1/8" x 1-1/2". 3/8" thickness

Material: carbon steel Q235B, without finish.

Length: 3-1/8" (80 mm), Width: 1" (25 mm), Pin diameter: 9/16" (14.5 mm).

leaf thickness: 2.8 mm.

Carbon steel Q235B, unfinished surface treatment.

Length: 2-3/8" (60 mm), Width: 9/16" (15.5 mm), Pin size 1/2 x 3/8" (14 x 9 mm).

110lb ( 50kg ) Load capacity, 360 degree rotation and more smoother.

Max Load: 66 lb (30kg), Rotation angle: 345°

Size: 3-1/2x2-1/2x1/2 inch (90x65x12.5mm), Thickness: 2.4mm

OD: 12.5mm (1/2 inch)