Best Lowrider Wheel Hubs in 2026

Made of high quality metal, duarable and high crush-resistant.

Novel appearance and exquisite workmanship.

Beadlock design, better to tighten the connection between rim and wheel.

Black coating finish to prevent oxidation

Extending the track width for a wider stance and greater control and stability

CNC machined high quality brass material

This wheel set features an extreme off-road scale design, with true to scale details and dependable performance.

Each is machined out of CNC aluminum for strength and durability that will last.

The outer beadlock ring is held in place by miniature scale hex bolts (M2 x 4.8mm), along with miniature scale hex bolts (M3 X 5.8mm) around the center hub.

Easy Upgrade Replace Traxxas stock Part #3632 Caster Blocks

Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,1/10 Nitro Slash 2WD.

Precision CNC Machined,Anodized 6061-T6 Aluminum for Lightweight and Durable Performance.

🚴‍♂️【COMPLETE ACCESSORIES】 Comes with 4 rubber O-rings.

🚴‍♂️【MATERIAL】Made of aluminum alloy, super light and durable.

🚴‍♂️【POWERFUL HUB】Convert 12mm QR hub to standard 9mm hub.

Material: Aluminium Alloy

This thru axle adaptor allows a 15mm thru axle hub to be installed on a standard 9mm dropout x 100mm quick release fork

It is simple to install ,no need other tools, the adapter slips in the hub just like the 15mm thru axle would.The wheel is then mounted and secured with your standard 5mm shaft quick release

1 pair bike skewers, 4 color choice, Front and rear skewers included

Made of Cr Mo aluminium alloy, durable and practical

Size&wieght: Front-100mm/56g, Rear-135mm/61g

Front 15mm boost hub adpater, Convert 100mm to 110mm.

Material: alloy 6061, CNC made.

This adapter allows a 15mm x 100mm thru axle hub to be installed on a 110mm wide Boost type fork. The wheel is then mounted and secured with your 15mm x 110mm quick release.

Reduces chance of stripping hub compared to stock 14mm hexes

Allows selection of larger, more aggressive tires that often require a 17mm wheel

Widens stance of vehicle by approximately 10mm per side to increase stability over rough terrain

Material: Cr-Mo Steel and T-6061 aluminum alloy; Compatible to road bicycle and most mountain bike.

CNC construction with anodized, anti-corrosion surface.quick release skewer

road bike skewer lock wheel size; Front skewer size:100mm. rear skewer size:130mm.

Black Vinyl material

Strong 6 bolt pattern. Increased rigidity

Increased driver control & comfort

Material:Aluminum Alloy Metal

Fit for: 1/10 Crawler Wraith 90018,90058 RC Car

Lightweight upgrade instantly enhances overall performance in handling and durability

MATERIAL：CNC machined aluminium alloy, it is durable, rugged, high strength and great anti-corrosion

SIZE & WEIGHT:Front Skewer-100mm,Rear Skewer-135mm,100g (1Pair)

Comes Anodized in Black, Blue, Gold, Red and Sliver,colorfast surface，Beatiful Color,Lightweight and stylish minimalist design,Stand out from the crowd.

Material: Aluminum alloy. Light weight and durable.

Long Extension: 15mm

Color: Black/Red/Silver

Compatible with:RC Hobby Cars

Hex Dimension: Hex 12mm; Thickness:5mm;

CNC machined for precision.Increased strength and precision.Easy upgrade from the original part

Equipped with extra outside beadlock ring bolts and a tightening head for hex screwdrivers tool to tighten bead rings

Lightweight performance based beadlock wheels.

Made of 6061-T6 alloy.Realistic scale design.

Outside diameter (approximate) : 25 mm.

Inside diameter (approximate) : 15 mm.

Number of balls : 7.

Package Content: You will receive 2pcs M8 bike nuts for wheels, M9.5 bike nuts, 2pcs M10 bike nuts, 4pcs 10mm / 0.39inch bike safety washers and 2pcs 8mm / 0.32inch bike safety washers. All of them are packaged in a plastic box and are convenient for you to store and carry. Different sizes and enough quantities can meet your needs in replacing bike wheel axle nut.

Product Size: M8: 0.6inch/1.5cm in outer diameter, 0.31inch/0.8cm in inner diameter, 0.28inch/0.7cm in height; M9.5: 0.75inch/1.9cm in outer diameter, 0.4inch/1cm in inner diameter, 0.36inch/0.9cm in height; M10: 0.71inch/1.8cm in outer diameter, 0.4inch/1cm in inner diameter, 0.31inch/0.8cm in height. Safety washers: 0.39inch/1.0cm and 0.33inch/0.8cm respectively.

Important Tips: Please measure the size of the bicycle wheel axle carefully before buying. You can use the paper to mark the size of the axle and then measure the circumference of the axle, or use a caliper to measure the diameter.

Hollow

【Material】Made of high-quality iron, durable and strong, suitable for most bicycles.

【Front Size】Short release lever for front wheel, hollow shaft size: approx.10.8cm / 4.25in, quick release: approx.15cm / 5.91in

【Rear Size】Long release lever for the rear wheel, hollow shaft size:14.5cm / 5.71in, quick release approx. 19cm / 7.48in.

New Aftermarket Polaris ATV Front Wheel Hub Clutch Seal

Compatible with Polaris

Replaces the following Part Numbers: OEM Number 3610019

* High strength&sturdy -- The bicycle wheel hub axle is made of high-quality metal materials, precision machining, high strength, durability, not easy to break, and long service life.

* Easy to install-- The bicycle wheel hub axle is easy to install and disassemble, you can quickly replace or disassemble, easy to use and bring more convenience to your journey.

* Light weight -- This bicycle wheel hub axle is super light, it will not increase the amount of training in your training and is suitable for long-term cycling.

Fine workmanship and made of premium metal

With the Wheel hex hub,It will preventing the shaft from falling out

The Wheel hex hub design help to improve the precision by reduce the gap

MATERIAL - Made of premium quality iron and aluminum alloy, it is ultralight, durable, rugged, high strength and practical for most bikes.

USAGE - Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel.

SIZE - Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 15cm / 5.9". Long release lever for the rear wheel, hollow shaft size: 14.5cm / 5.7", quick release: 18cm / 7.1".

NOTE: For SCX10 III and Redcat Gen 8, you will need to enlarge the axle hole to install the wheel hex and the original Hex Wheel Mount Nuts CANNOT be used together.

These RC Wheel Spacers fit for 12mm hex rims and is compatible with 1/10 RC Crawler Car Axial SCX10 90046 D90. DO NOT work for the TRX4.

Wheel Hex: 12mm, Axle Hole: 5mm, The barrel nuts fit 4mm axle. These 12mm Hex Wheel Hubs made of high quality Brass, solid and abrasion proof. If you have stance issues, these are ideal for distance and adding a little weight, lower the center of gravity and improve stability.

Material:Aluminum Alloy Metal

Fit for: 1/10 Crawler RC Car 2.2 inches wheel rims.

Lightweight upgrade instantly enhances overall performance in handling and durability

Package includes: 4 x Bicycle Wheel Axle Nuts

The specification of the nut is M10 nut. Please see the picture for the detailed size

The product is made of chrome plated alloy steel, strong, high strength, durable, corrosion resistant, excellent choice

Our updated Road Mountain Cycling Hub parts are made of Steel 1045, durable and practical for most bikes. Please see images, and you will find the different from others, the cap is thicker.

The Rear hollow shaft size: approx. 145mm / 5.7", hole diameter: approx. 9.2mm / 0.36"

The durable and extra hard dustproof cap, the thickness: 65 degrees, 2.4mm / 0.09inch. Usually the axels fit 20" 22" 24" 26" 28" bike, work on a 6 7 8 speed road bike.

Assorted Types and Sizes: these bike nuts come in 3 different types, which contain M10, M9.5 and M8, giving you multiple choices, and you can choose them according to your actual needs; And these bike axle washers are designed in 2 different sizes, including M10 and M8, meet your assorted demands

Precise Dimension: these bike safety washers measure approx. 8 mm in inner diameter, 19 mm in out diameter, and 26 mm in length, their hooks are measured approx. 4.69 mm in width, 6.9 mm in height and 2 mm in thickness; And another bike axle washer measure approx. 10.9 mm in inner diameter, 18.7 mm in out diameter, and 26 mm in length, their hooks are measured approx. 4.69 mm in width, 6.9 mm in height and 1.8 mm in thickness

Adequate Quantity to Meet Your Needs: you will receive 24 pieces of bike wheel nuts and 24 pieces of bike axle washers, 48 pieces in all, adequate quantity can meet your daily use and replacement demands, which allow you to replace your old one or broken one, and you can share them with your friends, relatives, colleagues and more

Material:Aluminum Alloy Metal

Fit for: 1/10th scale RC crawler car, Axial Wraith, TRX4,SCX10

Lightweight upgrade instantly enhances overall performance in handling and durability