Best Guinea Pig Wheels in 2026

Benchmark Abrasives metal cutting wheel with a 4-1/2" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (13,000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

Benchmark Abrasives metal cutting wheel with a 4-1/2" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (13,300 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

Benchmark Abrasives metal cutting wheel with a 5" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (12000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

✓The die grinder cut off wheel Set Ultra-thin design for minimal material loss die grinder cut off wheel latest innovation in abrasives, these grain micro fractures to allow a continuous supply of the sharpest cutting edges. These discs provide the fastest cut as well as the best utilization of the entire grain for the longest life, especially on stainless steel and high alloy materials.

✓Specification: grinder discs for metal For use on an Angle Grinder, die grinder disc Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch, 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor

✓Quality: Cut off wheels Applying to cutting all metals including stainless steel and cast iron, thin cut off wheels Benchmark Abrasives uses only the highest quality grains and backing material for our flap discs, cut of wheel High performance! Exposed during use to maintain an aggressive cutting edge, air cut off wheel metal cutoff longer service life in normal steel

Benchmark Abrasives metal cutting wheel with a 7" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness. Made of high-speed steel material for solidity and efficient cutting.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. The ideal grinding wheel support angle and die grinders, high-speed saws, stationary saws, and chop saws.

Benchmark Abrasives metal cutting wheel with a 6” diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (11,000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

Benchmark Abrasives 14" x 3/32" x 1" chop saw cut-off wheels are ideal for cutting all ferrous metal, iron, steel, tube, pipe, and light gauge material like drywall studs, etc.

The cut-off wheels are manufactured using aluminum oxide material which has a grainy texture that is good enough to cut metals with ultimate precision and perfection.

Designed to meet industrial standards, our cut-off wheels are recommended to be used with stationary saws, low horsepower saws, portable saws, and electric chop saws that are made for 14” sized wheels.

Benchmark Abrasives metal cutting wheel with a 4-1/2" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (13,300 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

Benchmark Abrasives metal cutting wheel with a 6" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (11000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

Benchmark Abrasives professional 7” T-Type cup diamond wheel is perfect for faster grinding of granite, marble, tiles, concrete, natural stone, masonry, etc.

These diamond grinding cups are of superior quality and manufactured to the strictest of standards. The wheel features good sharpness, and low noise, dry grinding does not burn pieces.

The high-quality and reliable grinding wheel has venting holes for excellent performance and long life. Suitable to use with an angle grinder, and floor machines.

Benchmark Abrasives 7" T27 depressed center grinding wheels are suitable for general grinding, cutting, smoothing welds, and stock removal on stainless steel, carbon steel, and other ferrous metals.

They are manufactured with multiple layers of fiberglass, Bakelite resin, and European aluminum oxide grain. These wheels have set the benchmark for cost-efficient grinding.

Designed to meet industrial standards, our grinding wheels are recommended to be used with angle grinders sized 7“ for cutting, grinding, material removal, etc.

Benchmark Abrasives 6" x 1" aluminum oxide flap wheels are perfect for surface polishing, finishing tools, pipes, cylinders, rust or paint removal, cleaning weld splatter, etc.

The strong and durable design of the wheels ensures stability and accuracy. These versatile abrasive wheels are made with premium X-Flexed cotton cloth.

Designed to meet industrial standards, our flap wheels are recommended to be used with bench grinders and pedestal grinders for a wide variety of applications.

Benchmark Abrasives 3" x 1" aluminum oxide flap wheels are perfect for surface polishing, finishing tools, pipes, cylinders, rust or paint removal, cleaning weld splatter, etc.

The strong and durable design of the wheels ensures stability and accuracy. These versatile abrasive wheels are made with premium X-Flexed cotton cloth.

Designed to meet industrial standards, our flap wheels are recommended to be used with rotary drills and die grinders for a wide variety of applications.

Benchmark Abrasives metal cutting wheel with a 4-1/2" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (13000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

Benchmark Abrasives metal cutting wheel with a 6” diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (11,000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.