Best Silver Wood Drill Bits in 2026

Features: Cutting Edge Diameter : 12.5mm / 0.49"; Shank Diameter : 12.5mm / 0.49"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand

High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.

Features: Cutting Edge Diameter : 8mm / 0.31"; Shank Diameter : 8mm / 0.31"; Cutting Edge Length: 75mm / 2.95"; Total Length : 115mm / 0.59"; Cutting Direction: Right Hand

High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.

【Step Drills and Cone Drill】3 piece 5/9/14 step drills (4-12/20/32mm) and 1 piece cone drill (8-20mm). Laser marking of step size provide convenient and accurate drilling

【Countersink Drill Bits】6 piece countersink drill bits: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm - 90° point, three cutting edges, ideal for deep countersinking

【High Quality】All drills are HSS Titanium coated, come with 1/4" (6.35mm) hex shank, and are precision ground, heat treatment, and hardened for consistently accurate drilling or enlarging holes into sheet & non-ferrous metals, wood and plastics

[Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you

[What You Will Have] Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately

[Easy to Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency

【3-IN-1 MULTIFUNCTIONAL COMBINATION DRILL TAP】 They are three-in-one operation, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic. One-step processing, greatly save processing steps and time costs, improve working efficiency. Deepening the chip flute helps to remove chips and debris on the tap, reducing friction and heat, thereby achieving a faster and cooler drilling process.

【PREMIUM MATERIAL】These high-quality taps are made of high-speed steel(HSS) and have high hardness to achieve sharpness, fast execution and maintain strength and efficiency. It can be applied to all wood, copper, iron and part of thin stainless steel is also applicable. The surface is treated with titanium alloy to improve the cutting performance and wear resistance of the drill , and extending the service life.

【 HIGH VERSATILITY&CONVENIENCE】The product portfolio includes SAE and metric sizes, can meet your various need. Each tap drill is engraved with its size, you can choose the accurate bit without any difficulty.The convenient 1/4" (6.35mm) hex shank has a tapered end to prevent excesssive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread. It also comes with a portable storage case you can carry and keep the drill neat and tidy.

Ideal carpenter tool for woodworking, installing hinges on wood doors, cabinet, window, etc

Material: High speed steel drill bit, covered by a brass shell, more durable and excellent for usage

Bit is in a self-centering design, means less walking and more precise drilling

🛠【Professional Design】1/4 inch hex shank drill bit is suitable for quick replacement, suitable for most power tools, The cutting edge is hardened and honed for sharpness. all drill bits have an 82-degree angle on the point for sharp and precise countersinking.

🛠【Easy to Use】A Chatter-Free, five-flute designed with staggered cutting teeth arranged to insure free chip flow and rapid chatter-free cutting, reduces vibration for smoother drilling.

🛠【Durable & Long-life】The countersink drill bit set is made of industrial grade high carbon steel with hard titanium coating. The automatic centre punch is made of pure brass. Durability & Long service life.

Comes in 7 sizes in a storage box – package including 7 Pieces of black Center Drill Bits Set in different sizes 1.0 1.5 2.0 2.5 3.0 4.0 5.0, which can meet most of the center hole needs

Well-made Center Bits - made of high grade M2 High Speed Steel well known as high temperature wear resistant and solid

Make Excellent Center Holes – Using these center drill bits to drill a starer hole for longer drill bits in wood without off centering, and for tap drill in metal to align properly, etc.

POINT DESIGN: 135° split point design increases cutting speed with self-centering feature and prevents drill bit walking or wobbling on working surface.

REDUCED SHANK with THREE FLATS: 1/2" reduced shank drill bit with tri-flat is designed to eliminate drill bits spinning in the chuck and ensures grip. Superior black oxide finish offers great wear resistance.

WIDE FLUTE: Parabolic flute design improves chips removal and prolongs drill bits life while drilling in metal and wood.

This 18 piece Industrial Grade High Speed Steel set includes 9 HSS drill bit and 9 HSS plug hand taps.

Gyros 118 degree split point drill bit set is professionally made for general purpose drilling.

Twist drills jobber length metric set comes with straight shank bits and is stored in a strong metal storage case

Cemented Carbide Tip: 11mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others

Features: Milled U-flutes with deep-cut spiral provides fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel

Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron

Durable Brass Construction

21/2" MNST by 2" MNPT Connections

【Size 】Cutting Edge Diameter : 12mm; Shank Diameter : 10mm; Cutting Edge Length: 75mm/2.95"; Total Length : 150mm/5.9". Package：1 piece.

【HSS Material】Made of high speed steel 4341 offer the reduced shank tool hard and tough, cutting effectively with impressive cutting performance.

【Gold and Black Oxide Finish】Gold titanium and black nitride dual coatings can apply lubricant better for smoother drilling and is more durable and corrosion resistant than the regular surface.

The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.

Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic

This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.

Widely applicable: Portable electric drill can be used to perforate wood, plastic, rubber, soft metal, bodhi, bones, etc. The drill has a variety of different specifications, simple and convenient to use, can meet the different needs of users, and let users feel at ease to own and use.

High quality: stable precision fixture, high concentricity, tightly closed, firm and easy to smooth. The semi-automatic electric drill thickens the nut, which is firm and not easy to crack. Precise, accurate, high-efficiency, tightly gripping drill bits, 0.8-3.0mm drill bits can be clamped. Screw and semi-mechanical design, accurate positioning, saving time and effort.

Reliable quality: Our electric drills have undergone strict quality control and quality assurance, with a high safety factor and can be used with confidence. After many inspections before leaving the factory, the quality is Assurance, you can rest assured to use such tools. Can perfectly replace old or damaged ones.

HSS HIGH SPEED STEEL: The high-speed steel material these bits are made of are designed to ensure sharp and fast execution in any material for clean results while making the bit long-lasting, durable, and wear resistant.

135° SPLIT POINT DRILL TIP: The 135-degree split point increases cutting speed with self-centering with no pilot hole and prevents walking while clearing chips and particles faster.

1/2” TRI-FLAT SHANKS: The tri-flat on the shanks of these drills are constructed for tighter chucking to maximize the hold to create precision holes.

The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.

Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic

This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.

Sizes 3/8", 1/2", 9/16", 5/8" and 3/4" in Wood Case

Also called Construction Reamers, Bridge reamers are used to align existing holes prior to bolt or rivet installation

Point is tapered to permit entry into overlapping holes

What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials

Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials

Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes