Best Amzcnc in 2026

EASY USE TIP: Loading connector & cable then crimps with the aid of hammer.Recommend 2 to 4 lb sledgehammer,with a bigger hammer you don't have to hit it as many times.Also works well in a shop vise.

Crimping Type: Indent. Terminal Type: Uninsulated.

WIRE GAUGE: Crimps 8 gauge to 4/0 gauge connectors.8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 0 AWG, 00 AWG, 000 AWG, 0000 AWG.

[CRIMPING RANGE]: 12AWG-2/0AWG

[MOLD INCLUDE]: Including 9 pairs of the largest hexagon crimping dies (12, 10, 8, 6, 4, 2, 1/0, 2/0AWG)(1/8 "for stainless steel wire rope)

[FEATURES]: Simplified On-Off control for speedy operation and easy to change the dies.

【Quick crimper 】This hydraulic crimper provides hexagonal confining pressure with 13 pairs of hexagon crimping dies ( (AWG: 9.8.6, 4, 2, 1/0, 2/0, 4/0, MCM: 250,300, 350, 500, 600)

【Labor-saving operation】Oil return valve , quick pressure relief allows the piston to quickly reset

【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working

【CRIMPING RANGE AND CUTTING RANGE】: Crimping range 12 AWG-2/0 AWG, Max. Cutting 2/0 AWG

【MOLD INCLUDE】: Including 9 pairs of the largest hexagon crimping dies (12, 10, 8, 6, 4, 2, 1/0, 2/0AWG)(1/8 "for stainless steel wire rope)

【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working

[CRIMPING RANGE]: 12AWG-2/0AWG

[MOLD INCLUDE]: Including 9 pairs of the largest hexagon crimping dies (12, 10, 8, 6, 4, 2, 1/0, 2/0AWG)(1/8 "for stainless steel wire rope)

[FEATURES]: Simplified On-Off control for speedy operation and easy to change the dies.

Powerful 8 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.

6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2"

Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.

STEEL CABLE RAILING FITTINGS – This hand swager crimper is perfect for crimping the stainless steel fittings of cable railings and boat rigging.

Provides 8 US tons of crimping force for use with swaging 1/16"~1/4" inch fittings onto 1/16"~1/4" wire rope cable,

This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut

【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections.

【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair.

【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings. 💪Note : When connecting Tee fittings, the middle connection should be done first or second.

Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%

Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box

Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread

【Handheld Sized】The lightweight hand-held hydraulic press is very portable.

【Easy to use】Crimping pipes and fittings in an easy and labor-saving way.

【Function】The kit is applicable for beadlocking fitting and barrier A/C hose.

Powerful 8 US TRUE TON Punching Capacity. Head can be freely selected 360°，Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.

6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2"

Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.

【Durable Dies & Punches Set】 ½", ¾", 1", 1¼", 1½", 2". fits ½", ¾", 1", 1¼", 1½", 2" Conduit Size.

【Wide Application】 This manual metal stud punching tool cuts round regular , flat cuts without burrs. Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic, etc.(Max thickness for steel: 1/8"; Max thickness for stainless steel: 1/16".)

【Humanized Design】Long handle, easy to use, ergonomic structure, maximizing human capital savings, saving time, with this manual punching machine, drilling worry-free. Toolbox compact size, light weight, easy to carry and storage.

20 US Ton Capacity. 6" Stroke Hollow Hydraulic Cylinder Ram

Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap

Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return.

Basic parameters: hydraulic gear puller, max. capacity:33000 lb(15T) ;Advance stroke: 2"(50mm);Jaw size: 12" (300mm); maximum open jaw: Φ21" (530mm) Refer to the third picture.

Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.

Durable Steel Construction: Hydraulic pump is made of high strength 45# carbon steel and processed by integrated welding for preventing oil leakage and providing sturdiness, rust resistance and corrosion resistance for frequent use; durable alloy steel jaws for ensuring stability

Basic parameters: hydraulic gear puller, max. capacity:11000 lb(5T) ;Advance stroke: 2"(50mm);Jaw size: 8" (200mm); maximum open jaw: Φ13" (330mm) Refer to the third picture.

Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.

Durable Steel Construction: Hydraulic pump is made of high strength 45# carbon steel and processed by integrated welding for preventing oil leakage and providing sturdiness, rust resistance and corrosion resistance for frequent use; durable alloy steel jaws for ensuring stability

Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4",Actual hole diameter:0.89" ,1.11" ,1.36" ,1.7"

Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall)

Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated 5140 steel construction.

Powerful Tool: This hydraulic gear puller has 5 ton max capacity and 2"(50mm) ares travel which can meet your working requirements.

3 in 1 Design: This wheel bearing pulling separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360° for flexibility.

Compact & Lightweight: The integral puller is compact and lightweight, which is easy for you to transport.

【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements

【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility

【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage

10 US Ton Capacity. 4" Stroke

Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap

Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return.

Powerful 15 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.

10 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2",2-1/2",3"3-1/2",4" .

Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.

Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage.

Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8"; Max thickness for stainless steel: 1/16".

Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.

Powerful 8 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.

6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2"

Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.

Powerful Tool: This hydraulic gear puller has 10 ton max capacity and 2"(50mm) ares travel which can meet your working requirements.

3 in 1 Design: This wheel bearing pulling separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360° for flexibility.

Compact & Lightweight: The integral puller is compact and lightweight, which is easy for you to transport.

Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and durable and possesses a maximum of 5T (11023 lbs) capacity and long service time.The maximum stroke of the piston is 2"'.

Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.

Bidirectional Operation: The 5-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has2" (50 mm) axis travel with 5.5" (140 mm) max reach and 7.9" (200 mm) max spread.

【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections.

【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair.

【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings. 💪Note : When connecting Tee fittings, the middle connection should be done first or second.

Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4"

Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall)

Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas.

[Great Compatibility]: 3-Jaw hydraulic gear puller set features 15 tons max capacity, 2" (50mm) axis travel, 12" (300mm) max spread and 7 1/16" (180mm) max reach for fully meeting your different requirements on pulling truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly

[3 In 1 Design]: Puller set integrates pump, oil tube and drawing machine for providing comprehensive functions on mechanical installation and repair, can be used horizontally and vertically, not restricted by work site environment

[Flexible & Easy Operation]: 3 jaws can be adjusted from high to low point and pump head can be rotated 360 degrees for flexibility; 2-way yoke allows 2 or 3 leg pullers for easy interchanging; rotate the oil return switch and pull up the handle to pressurize.

Powerful Tool: This hydraulic gear puller has 10 ton max capacity and 2"(50mm) ares travel which can meet your working requirements.

3 in 1 Design: This wheel bearing pulling separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360° for flexibility.

Compact & Lightweight: The integral puller is compact and lightweight, which is easy for you to transport.

Conduit Fitting Size: 3", Actual Hole Size: 3.54"

Required Punching Force: 10 Tons

STANDARD THREAD - Fits Draw Stud Size: 3/4"-16UN

Crimper crimps 10 to 22 AWG insulated and non-insulated terminals

Cutting and Crimping Tool has specially hardened wire cutter in nose

Tapered nose design for working in confined spaces