Best Hydraulic Pullers in 2026

GXL Carrier & Pinion Bearing Puller Dana 30, 40, 60, 70, 80, Ford 10.25 Clamshell Design

Ford 10.25" & Ford 10.5"

This tool is not used for removing pinion bearings on Dana 80.

PRACTICAL DAMAGE-FREE SEPARATOR: The ABN Bearing Puller with 1/2" to 4-5/8” Inch Jaw – Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator professionally applies even pressure to smoothly separate bearings and remove gears without damage

VERSATILE USES: Removes bearings, pinions, gears, pulleys, steering wheels, and fittings from shafts; For automobiles, ATVs, and power sport vehicles

DURABLE FOR HEAVY-DUTY APPLICATIONS: Constructed from heat-treated and chrome-plated steel with a black oxide finish for rust-resistance, strength, and longevity

Great Compatibility: The clamshell carrier bearing puller is compatible with Dana 30, 40, 60, 70, Ford 10.25" bearings. With the clamshell bearing puller, you can quickly remove the bearings. In addition, its power is evenly distributed, so less damage will be brought to your pinion bearings.

Premium Performance & Features: With high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minor damage, drastically reducing dismantled time. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface.

Complete Equipment: All necessary parts are ready for you. There is a main puller body, plug, center bolt, 3 clamshells, retaining ring, and adjuster rings. Besides, this unit comes with a handy stand, so you can group all the working parts together.

1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)

2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble

3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts

【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements

【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility

【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage

CR-MO alloy steel jaws for greater strength and performance

Provides up to 10 tons of pulling force with hydraulic ram

Makes 8 different pulling combinations for total versatility

Bearing remover and install tools Can use for Domestic And Import Front Wheel Drive Car Truck

Accessories Included: Bushing: 2.16"(54.92mm) O.D. x 0.55"(14.01mm) Thicknes, 2.32"(58.93mm) O.D. x 0.55"(14.01mm) Thickness, 2.48"(62.95mm) O.D. x 0.55"(14.01mm) Thickness, 2.62"(66.49mm) O.D. x 0.55"(14.01mm) Thickness, 2.75"(69.75mm) O.D. x 0.55"(14.01mm) Thickness, 2.81"(71.41mm) O.D. x 0.55"(14.01mm) Thickness, 2.89"(73.46mm) O.D. x 0.55"(14.01mm) Thickness, 2.95"(75.00mm) O.D. x 0.55"(14.01mm) Thickness, 3.05"(77.55mm) O.D. x 0.55"(14.01mm) Thickness, 3.21"(81.46mm) O.D. x 0.55"(14.01mm) T

Sleeve [A-D]:4.03"(102.25mm) O.D. x 2.55"(64.65mm) Length, 3.61"(91.68mm) O.D. x 2.55"(64.65mm) Length, 3.41"(86.66mm) O.D. x 2.55"(64.65mm) Length, 3.00"(76.23mm) O.D. x 2.55"(64.65mm) Length

HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool.

COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs.

VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully.

[Great Compatibility]: 3-Jaw hydraulic gear puller set features 5 tons max capacity, 2” (50mm) axis travel, 7 7/8” (200mm) max spread and 5 1/2” (140mm) max reach for fully meeting your different requirements on pulling truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly

[3 In 1 Design]: Puller set integrates pump, oil tube and drawing machine for providing comprehensive functions on mechanical installation and repair, can be used horizontally and vertically, not restricted by work site environment

[Flexible & Easy Operation]: 3 jaws can be adjusted from high to low point and pump head can be rotated 360 degrees for flexibility; 2-way yoke allows 2 or 3 leg pullers for easy interchanging; rotate the oil return switch and pull up the handle to pressurize or release pressure; safety flooding valve to avoid overloading

Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time.

Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.

Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread.

2 or 3 reversible jaws for inside or outside pulling needs

Made from hardened carbon steel for maximum strength

Fine thread center bolt for controlled pull

VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels

ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs

WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks

The 27 Pieces of Press and Pull Sleeve Kit is designed for removal and installation of all types of bearings, bushes and seals. It is designed to remove and install bearings including Silent Bearings, Hydraulic Bearings, Bearing Bushes, Ball Bearings, Shaft Seals, Rubber Bearings and many more. It is crafted to remove bushes, bearing or seals without the need of a press and to reduce the possibility of damaging the bearings/suspension housings.

Tool Press and Pull Sleeve Kit can also be used with a workshop press if required. It kit contains a unique design with U-Plot on each sleeve for operator to easy visual inspect removal and installation. The spindles have thrust bearings fitted to both ends making the extracting and installing much easier. The end caps are also double sided making them a universal fit for the sleeves

This professional pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal and installation of bushes, bearings and seals.

Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.

Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings，enables many bearings and components to be dismounted

High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.

2 inches and 3 inches bearing separators

Drop forged and heat treated.

The 5" puller cross-bar with a 6-1/4" forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools

Max reach: 3-3/8-in max spread: 4-in. Reversible two-jaw design for inside or outside pulls. Chrome vanadium steel yoke and jaws

Fine thread center bolt for maximum torque and minimal effort

Reversible two-jaw design for inside or outside pulls

[ High Quality ] --- This is a two jaw gear puller, which is made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable. This tool is used for tearing down ball joint in parts of the combined mandrel brake system.

[ Easy Operation ] --- Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft. The puller can be bilateral rotation, enable laser stretching size and working space.

[ Wide Application ] --- Widely use in various bearings that are not easy to disassemble. Perfectly fit for automotive flywheel, motorcycle wheel, car wheel, scooter motorcycle bearing and gear and so on.

[ Feature ] --- 3 Jaw Gear Puller removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside.

[ High Quality ] --- 3 jaw bearing puller adopts corrosion-resistant black oxide finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller.

[ Bearing Range ] --- Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force.

Heat treated alloy steel

Drop forged for strength

Chrome plated finish

FUNCTION 🚗: This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.

APPLICABLE 🚗: Suitable for items 30mm 90mm in diameter. (applicable bearing dimension)

MATERIAL 🚗: Made of #45 carbon steel, heavy-duty structure use oxidation treatment for corrosion resistance.

Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and durable and possesses a maximum of 5T (11023 lbs) capacity and long service time.

Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.

Bidirectional Operation: The 5-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has2" (50 mm) axis travel with 5.5" (140 mm) max reach and 7.9" (200 mm) max spread.

【DAMAGE-FREE REMOVAL】- Our manual gear puller can take out most of the parts that match the shaft, such as gears, sprockets, bearings, pulleys, etc. Its power is evenly distributed and will not cause damage to your items. Will be your good partner in disassembly work.

【20 TON PULLER TOOL】- Spread Reach: 481 mm/19" to 623 mm/24.5". Spread Range: 125 mm/4.9" to 310 mm/12". M24 Lead Screw Length: 512 mm/20". Pull Capacity: 20 Ton. And our product does not need to be installed; you can use it directly.

【TAPERED STEEL JAWS】- Three-jaw structure has the same load distribution, which can be securely clamped and concentrically pulled. The three-jaw gear puller evenly distributes the tension and protects the gear. Slim tie rods, steel center bolts, and apex threads Can easily grasp and enter narrow spaces.

2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.

This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.

2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.

DURABLE: Splitter halves are constructed from drop forged hardened alloy steel for added strength and durability with zinc plating and the screws are black oxide coating prohibiting rust.

EASY EXTRACTIONS: Designed to remove gears and bearings effectively, helping the user extract even the most stubborn bearings.

SHARP ANGLED EDGES: Two sharp and angled edges allows access between tightly assembled parts and ensures a secure pulling surface so the mechanic can split bearings easily.

Structural design,gently turning a small wrench can produce a strong pull force. Mechanical equipment combination of rod brake device and other parts of the ball joint.

Using high quality 45 carbon steel, special heat treatment for removing,with high hardness and good performance.

It can used for removing guide bearings, pump bearings, brushes. Removes all sleeve-type bearings with 17-38mm inside diameter

3-Jaw Puller Set: The inner bearing puller is ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.

Premium Material: The 3-Jaw bearing extractor pilot bearing puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.

Strong Puller Power: Structure design of the auto bushing gear extractor, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter.

Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time.

Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.

Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread.

[Great Compatibility]: 3-Jaw hydraulic gear puller set features 5 tons max capacity, 2” (50mm) axis travel, 7 7/8” (200mm) max spread and 5 1/2” (140mm) max reach for fully meeting your different requirements on pulling truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly

[3 In 1 Design]: Puller set integrates pump, oil tube and drawing machine for providing comprehensive functions on mechanical installation and repair, can be used horizontally and vertically, not restricted by work site environment

[Flexible & Easy Operation]: 3 jaws can be adjusted from high to low point and pump head can be rotated 360 degrees for flexibility; 2-way yoke allows 2 or 3 leg pullers for easy interchanging; rotate the oil return switch and pull up the handle to pressurize or release pressure; safety flooding valve to avoid overloading

1. The carrier and bearing puller can be used to remove bearings quickly. Its power is evenly distributed, so it will reduce the damage of pinion bearings

2. The installation process does not require other complex working tools. Just place the body on the plug and adjust the upper and lower adjusting rings. Then select the appropriate flap and tighten the retaining ring. Finally, you can use an impact gun to remove the bearing

3. Including:main puller body,plug,black clamshell,white clamshell,yellow clamshell,adjuster rings,and a stand for you to hold and store your tools

For Use in Differential Applications

Designed for Specific Applications

Works with an impact gun or hydraulic press to safely and easliy remove axle bearings