Best Broadcom in 2026

LSI Logic Controller Card 05-50031-00 MegaRAID 9480-8i8e 16-Port Ext 12Gb SAS/SATA PCI Express3.1 Retail

6 Gb/s data transfer rate, Eight external SATA SAS ports

Two Mini-SAS x4 external connectors (SFF8088)

RAID levels 0, 1, 5, 6, 10, 50 and 60

Data Rate: 1.25Gb/s

Wavelength: 850-nm

Reach: up to 550 meters; Fiber Type: Dual LC OM3 multi-mode fiber

Raid Multi Insect Spray kills bugs on contact

Kills: Ants, Asian Lady Beetles, Boxelder Bugs, Carpet Beetles, Crickets, Firebrats, Fleas, Silverfish, Flies, Fruit Flies, Non-Biting Gnats, Hornets, Mosquitoes, Moths, Pillbugs, Roaches, Sow Bugs, Spiders** (except Black Widow and Brown Recluse Spiders), Wasps, and Waterbugs

Insect spray with no lingering chemical odor

Internal SAS SFF-8087 to 4x SATA Cable, 1-meter(3.3ft)

AWG30 Twinaxial 8-pair high-bandwidth low-skew wire

Impedance = 100 Ohms

4 Internal SATA 6Gb/s Ports

Compatible with SATA 6G, 3G and 1.5G Hard Drives

PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots

Internal SAS HD to Internal SAS HD Cable, with Sideband, 0.8-meter(2.6ft);

Impedance=100 Ohms;

Up to 12Gbps data rates;

Internal SAS SFF-8087 to Internal SAS SFF-8087 Cable, 0.5-Meter(1.6ft);

Impedance = 100 Ohms;

Up to 6Gbps data rates;

Internal SAS HD SFF-8643 to Internal SAS SFF-8087 Cable, 1-m(3.3ft);

Impedance=100 Ohms;

Up to 12Gbps data rates;

Internal SAS HD SFF-8643 to Internal SAS SFF-8087 Cable, 1-Meter(3.3ft);

Impedance = 100 Ohms;

Up to 12Gbps data rates;

IMPROVE STORAGE CAPACITY: This 2-Port PCIe SATA and eSATA Controller Card enables support of two internal SATA or external (eSATA) drives through PCI Express; A cost-effective solution to increase your system's storage capacity

ASM1061 CONTROLLER: This SATA and eSATA controller card features a dedicated chipset to enable two switchable SATA and eSATA 6Gbps ports via a single x1 PCIe slot; Supports FIS-based Port Multiplier, Command-based switching, NCQ, and ATA/ ATAPI commands

WIDE COMPATIBILITY: Supports Windows and standard SATA and eSATA SSDs (solid-state drives) and HDDs (hard drives); Supports SATA III (6 Gbps) and earlier revisions; Compliant with PCI Express 2.0

Lsi Logic 9211-8i Sgl Sas Raid Controller - Pci Express X8 - 600mbps Per Port - 2 X Sff-8087 Mini - Serial Attached Scsi Internal - Rohs Compliance

* Simple to Use : NO Driver required Plug and play, support 2.5 inch solid state drive, 2.5 inch mechanical hard drive, 2.5 inch Blu-ray drive, 3.5 inch mechanical hard drive, 3.5 inch Blu-ray drive, etc. It is widely applied as start-up disk, support hot swappable.

* SATA 3.0 & PCIE V3.0 : Support SATA transfer rate: SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps). Compliant with PCI-Express specification V3.0 and backward compatible with V2.0. PCI-Express X4 interface, and compatible with PCI-Express X4/X8/X16 slots(recommended to use under PCI-E 3.0, faster).

* 6 Ports Adapter Card --- You could add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card.(4X bidirectional bandwidth theoretical speed up to 8GB/S) ,Support Intelligent Sleep - If you do not operate the computer for 3 minutes, the hard disk will enters an automatic sleep mode , and will automatically activates when rewriting data.

✅ SSD Adapter: Connect a M Key PCIe M.2 SSD (NVMe or AHCI) to your computer through PCI Express for ultra-fast data access.

✅ Wide Compatibility: Compatible with PCIe 3.0 spec and backward compatible with PCIe 1.0 and PCIe 2.0 spec. It supports PCIe x4 bus slot and compatible with x8 / x16 bus slot

✅ Supported Sizes: Accommodates 2230, 2242, 2260 and 2280 form factor M.2 SSDs (NVMe or AHCI) via multiple mounting holes.

➤You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.

➤4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.

➤Chipset --- With using The Asmedia1062 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.

1.The FS-S4-Pro is a PCI express 3.0 X1 interface to 4-Ports 6 Gbps max speed SATA III expansion card. It allows users add 4X NONE-RAID SATA 3.0 storage or AHCI BOOT UP HDDs/SSDs on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS).

2. Select the ASMedia ASM1064 the most stable NONE-Raid PCIE 3.0 SATA III host controller. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI BOOT UP or storage HDDs/SSDs.

3. Plug and Play on Windows 11, 10, 8.x, 7, Vista, XP (32/64bit) and Windows Server 2022, 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64bit). MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems.

1. The FS-S6-Pro is a PCI express 3.0 X4 interface to 6-Ports 6 Gbps max speed SATA III expansion card. It allows users add 6X NONE-RAID SATA III storage or AHCI BOOT UP HDDs/SSDs on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS).

2. Select the ASMedia ASM1166 the most stable NONE-RAID PCIE 3.0 SATA III host controller. PCIE 3.0 X4 interface, provide 16Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI BOOT UP or storage for HDDs/SSDs.

3. Plug and Play on Windows 11, 10, 8.x, 7, Vista, XP (32/64bit) and Windows Server 2022, 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64). MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X, 10.9.x, 10.10.x, 10.11.x, 10.12.x, 10.13.x, 10.14.x, 10.15.x and most of Linux kernel systems.

Controller: LSI SAS 2008 6Gbps SAS/SATA HBA RAID Controller Card

PCIE 2.0 (6.0 Gb/s), X8 Lane; 2x Mini SAS SFF-8087 Ports

Up to 6 G SATA and SAS link rates, SAS 2.0 complian; Support 256 SAS and SATA device;

4 Internal SATA 6Gb/s Ports

Compatible with SATA 6G, 3G and 1.5G Hard Drives

PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots

Two-phase power solution with up to 14 watts output supports the latest nvme units

Large heatsink and active fan reduce ssd m.2 temperatures for unregulated transfer rates and increased reliability

Adapted server-type PCB supports up to four pcie 4.0 / 3 m.2 units, with bandwidth up to 256 gbps for smooth data transfers

We recommend a fresh Windows install with this card

Drivers are required for this card to function.

ASM1061 Chipset (Asmedia 1061 SATA Host Controller)

HIGH-PERFORMANCE: Add four SATA III 6Gbps ports to your desktop computer or server using a PCIe x1 slot to connect SATA drives (HDD/SSD); 4-Port SATA PCIe card features 4x SATA connections for connecting drives using SATA cables (sold separately)

MARVELL RAID CONTROLLER: JBOD or Hardware RAID 0, 1, and 1+0 modes can be configured through BIOS - HyperDuo feature allocates frequently accessed files to faster SSD drive - Supports Port Multiplier, Native Command Queuing (NCQ) and ATA/ATAPI commands

COMPATIBILITY: Supports PCIe 2.0, SATA III & AHCI specs and backwards compatible w/ earlier versions - Supports Windows, Mac, and Linux and is also compatible with Optical/Blu-Ray drives - NOTE: HyperDuo configuration supported in Windows only

RAID level 0, 1, 5, 10 and JBOD

Multiple RAID support

Bios boot to RAID with point-to-point connectivity or through port Multiplier

Connect five SATA drives to any free PCI-E x4 Slot, providing up to 1700 MB/s Speed.

Plug and play supported, No additional software installation or setting required.

Can support port Multiplier that is not in a RAID configuration.

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card ).

Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length.

The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports.

HIGH-PERFORMANCE: Add eight SATA III 6Gbps ports to your desktop computer or server using a PCIe x4 Gen 2 slot to connect SATA drives (HDD/SSD); 8-Port SATA PCIe Card features 2x Mini-SAS connections with Mini-SAS to 4x locking SATA adapter cables incl.

QUAD CONTROLLERS: This PCI Express SATA 6 card features a PCIe MUX and four 2-Port SATA host controllers; This architecture allows for eight total SATA (serial ATA) 6Gbps ports through a single x4 PCIe slot, enabling combined total throughput up to 20Gbps

COMPATIBILITY: Supports PCIe Gen 2 & SATA III Specs, and previous generations at lower performance (SATA I/II, PCIe Gen 1); Windows (XP+), macOS (10.6.8+), Linux (2.6.32+); Improved motherboard compatibility with no bifurcation required & no built-in RAID

4 Channel for 4 storage devices like SSD or HDD. This Card will let You Grow as Your Needs Grow to Add more Devices to your System.

Configurable Port as Internal SATA or External eSATA Port, SATA III 6Gb/s on Every Channel for all your SSD and HDD.

1 Port Multiplier Function For Multi-Bay Enclosures (4 drives), Support both FIS and Command-based Switching.

Supports SATA III transfer speeds up to 6.0 Gbps; backward compatible with SATA I/II at 1.5/3.0Gbps

Built with Marvell 88SE9230. Supports Hardware RAID 0, 1, 10, and HybridDrive modes (powered by Marvell HyperDuo). Support on-the-fly AES 128/256-bit encryption

Support Port Multiplier FIS-based and Command-based switching

SECURE DESIGN: The M.2 SSD to 2.5in SATA III adapter features an enclosed housing that adds protection to your NGFF (Next Generation Form Factor) SSD; Fits in a 9.5mm or larger SATA slot or enclosure

STURDY CONSTRUCTION: The M.2 (NGFF) to SATA adapter's added protection lets you confidently use your M.2 drive in applications that require an added level of durability

INCREASED PRODUCTIVITY: Using an M.2 SSD to SATA adapter in place of a platter drive better utilizes your SATA III controller, by reducing any bottlenecks with file transfer speeds up to 6Gbps

1. Intel Thunderbolt 4 JHL 8540 controller

2. Ultrafast connectivity: Two Type-C ports with USB 4 support, up to 40Gb/s bi-directional bandwidth, per port allows you to connect up to five Thunderbolt-enabled devices in a daisy-chain configuration using Thunderbolt cables.

DisplayPort 1.4: support up to 8K resolution monitors