Best Clda1Evel in 2026

【Product Parameter 】1.25Gb/s up 2.5Gb/s down serial optical interface compliant to 802.3AH specifications small form factor pluggable module SFP.1490 nm DFB transmitter, 1310 nm APD photo detector BURST receiver,up to 20 km,single Power Supply 3.3V.

【Product Feature】2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers.

【Durable Metal Casing】All-metal housing for superior EMI performance Low power consumption.

【SFP to RJ45 】1.25G Copper SFP transceiver ( SFP port to 10/100/1000M Base-T RJ45 connection),supports up to 100m cat5e copper cable connection.

【WIDE COMPATIBILITY】The 10/100/1000Base-T Transceiver Module is widely compatible with most fiber switches, media converters, routers or other fiber optic equipments with SFP ports,such as Huawei,Cisco,Huawei,H3C,HP,ZTE,D-Link,Microtik.

【HOT PLUGGABLE】Plug in or remove your SFP module without needing to shutdown your network. Hot swap-ability ensures your network always stays up.

AC600 Nano size wireless Dual band USB Wi-Fi adapter for fast and high speed Wi-Fi connection.

Strong 2.4G/5G connection allows the user to use the Internet with lag-free experience.

Sleek and miniature sized design allows the user to plug and leave the device in it's place.

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 10/100/1000M

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

IMMUNE SUPPORT- Designed to help boost the immune system: All natural and safe for all ages. Optivida Silver helps speed up natural processes that have positive effects on the body.

10MPPM NANO-SILVER- Powerful 10 PPM nano silver

OPTIVIDA SILVER- Silver Liquid Solution can be taken up to three times daily according to directions. Each 16-ounce bottle contains 96 adult servings.

10GBase-CU, 2 Meter

2-pair differential twinax cable, Passive, EEPROM I2C

Compatible with Cisco SFP-H10GB-CU2M, Ubiquiti, Fortinet and more

Data Rate: 1.25Gb/s

Wavelength: 850-nm; Reach: up to 550 meters

Fiber Type: Dual LC OM3 multi-mode fiber

Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with multimode LC for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications

Compatible with MSA compliant equipment from Cisco, Ubiquiti, TP-Link, Huawei, Mikrotik, Netgear, Supermicro

Low power consumption and low EMI emission design; Hot-pluggable with advanced ESD protection

Data Rate: 1.25Gb/s

Wavelength: 850-nm; Reach: up to 550 meters

Fiber Type: Dual LC OM3 multi-mode fiber

Data Rate: 1.25Gb/s

Wavelength: 850-nm

Reach: up to 550 meters; Fiber Type: Dual LC OM3 multi-mode fiber

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 3-Meter(10ft), 30AWG.

SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.

Compatible with Cisco, Fortinet, Cisco Meraki, D-link, Supermicro, Mikrotik, Netgear, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices.

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 2-Meter(6.5ft), 30AWG.

SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.

Compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices.

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.3-Meter(1ft), 30AWG.

10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High-Performance Computing.

Widely compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open Switch, etc devices.

UPC: 817882022729

Weight: 1.350 lbs

Used indoors for speeds up to 1 Gbps

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 2-Meter(6.5ft), 30AWG.

SFP+ Cable can connect switch, router, server, NIC or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network and High Performance Computing.

Compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices.

NANO-SILVER DROPS: Our lozenges are made with nano-silver molecules. Unlike colloidal silver, our silver is a new generation of silver with much higher effectiveness.

NATURAL FLAVOR: Our nano-silver lozenges were made with organic honey, lemon, and peppermint oil for a sweet, soothing flavor.

IMMUNE SYSTEM SUPPORT- Organic Honey to support your immune system & soothe throat discomfort. SUPPORT your immune system and increase overall health

Compatible with Ubiquiti Networks UF-RJ45-1G, Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.

10/100/1000BASE-T SFP to RJ45 Copper for Category 5e copper wire. Gigabit SFP to RJ45 Copper Module 10/100/1000M Auto-Negotiation. Compliant with MSA standards. RJ45 connector. Reach 100m.

Easy to use & Durable: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function.

BOJACK 10 Values MOSFET transistors Assortment Kit

Product Name: MOSFET transistors

Model: 10 Type: N-channel-( IRFZ44N IRF510N 520N IRF530N IRF540N IRF640N IRF740 IRF840 IRF3205),P-channel-(IRF9540)

Seamless Conversion of LC Fiber to Copper – This fiber optic to ethernet media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX LC fiber to 10/100/1000 Base-T RJ-45 copper media or vice versa.

Extend Your Transmission Distance – By using this ethernet fiber media converter, you can easily extend link distance up to 550 meters/ 1804 ft via OM3/OM4 multimode fiber (MMF, LC, Duplex).

Plug and Play – No software installation or configuration required. Hot-swappable design makes this ethernet fiber converter easy to install and troubleshoot.

Compatible for HP J4859A/J4859C/J4859B, and Other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with Gigabit SFP ports.

1000Base-LX/LH SFP module: 1000Mbps data rate, Single-Mode, duplex LC connector, 1310nm wavelength, the transmission distance up to 10km, working temperature: 0℃ ~ +70℃, Tx Power(dBm): -9 ~ -3, Rx Sens.(dBm): ＜ -22.

Easy to use & Support DDM: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. DDM support: DDM allows you to monitor the critical information, to find out some potential problems.

Fiber Port: 40-km SFP transceiver included (1.25G, singlemode, 1310-nm)

Fiber Type: SFP SMF, Dual LC

RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover

Seamless Conversion of LC Fiber to Copper – This fiber optic to ethernet media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX LC fiber to 10/100/1000 Base-T RJ-45 copper media or vice versa.

Extend Your Transmission Distance – By using this ethernet fiber media converter, you can easily extend link distance up to 550 meters/ 1804 ft via OM3/OM4 multimode fiber (MMF, LC, Duplex).

Plug and Play – No software installation or configuration required. Hot-swappable design makes this ethernet fiber converter easy to install and troubleshoot.

Data Rate: 10G

Wavelength: 850-nm; Reach: up to 300m

Fiber Type: Dual LC OM3/OM4 multi-mode fiber

10 GbE high bandwidth cable connects a switch, server, NIC, or transceiver for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications such as Fibre Channel, InfiniBand, and SONET

Passive SFP+ cable connects equipment up to 7 meters for high density networking environments with Top of Rack (TOR) or Middle of Row (MOR) switching requirements; Low power consumption SFP+ twinaxial cable provides a cost-effective fiber alternative to installing fiber transceivers and cables to connect a 10G network

SFP+ Small Form Factor Pluggable Plus cable is hot pluggable with an SFP+ 20-Pin connector; Quick release latch provides a secure connection until the release tab is pulled

10GBase-CU, SFP+ to SFP+ Connetor, Passive, 1 meters, 30AWG;

Compatible with Cisco, Ubiquiti, D-link, Supermicro, Netgear, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc.

All products are passed by TDR & VNA tests in our Signal Integrity Lab.