Best Cojoys in 2026

Distance between center of fixed holes across top right top left is 32mm.

Hex gear size is to fit a 12mm one way bearing.

Perfectly For 28 Size Nitro Engine 1/8 RC Car .

W10001 Upgrade Parts :Exhaust Pipe Tubing,Silver Header Manifold Part,Plastic Ring.

erfectly Fits RC Hobby Model Car HSP 1:10 Scale Nitro Power RC Car Monster Truck Buggy Truggy Upgrade.

Made of aluminum alloy, high quality and light weight. very durable in using.

Parts Name: Pull Starter+Hex Nut One Way Bearing (12MM) .

Fits for vertex VX 12 18 nitro engines.

It is a perfect accessory for your RC car.

4PCS Exhaust Pipe Springs Parts

Length: 100mm Total.

Fit for: 1/8 scale models with rear exhaust engines.

Compatibile with: 1/8 Nitro RC car

Package Includes: 3PCS | (As Picture Shown)

2-Pack 28.5mm 25T Teeth Tooth Steering Half Servo Arm Horn.

Aluminum CNC Machined for Precision

Fits for 1/10 model car.

2PCS 110mm Linkage Pull Rod M3(Hole to Hole)

4PCS 120mm Linkage Pull Rod M3(Hole to Hole)

2PCS 130mm Linkage Pull Rod M3(Hole to Hole)

CNC machined for precision.Increased strength and precision.Easy upgrade from the original part

Convertsion Set Upgraded Hop-Up Parts.Easy to install.Top-Quality Materials & Superb Craftsmanship.

This May Fit Other Models,but if in doubt,please check your manual or ask us for more specific information.

Package include:Flywheel,Clutch gear,Clutch Nut,Clutch Shoes & springs,Bearing,Screw,Round spacer(Just as photo showed)

CNC machined for precision.Increased strength and precision.Easy upgrade from the original part .

Convertsion Set Upgraded Hop-Up Parts.Easy to install.Top-Quality Materials & Superb Craftsmanship.

Package include: </b>1.5MM 2.0MM 2.5MM 3.0MM Hex Screw.

Material: durable hard aluminum alloy and steel.

Total length:173mm/7inch.

100% New aftermarket Starter built to meet OEM specifications for Cummins Engines, Dodge

Specs: Unit Type: Starter, Voltage: 12, Rotation: CW, Teeth: 13, KW: 2.5, Starter Type: OSGR

Compatible With / Replacement For: CUMMINS ENGINES B Series 19994-On, DODGE RAM PICKUPS 1994-2001, RAM PICKUPS 2002

1:14 Scale All-terrains Remote Control Car - Bezgar TC141 remote control truck made by sturdy ABS with a special higher chassis, is built to race over the obstacles on all-terrains like sand, mud or concrete in indoors or outdoors. Its rugged structure is collision-resistant, impervious to barriers.

2.4Ghz Multifunctional Remote - The 2.4Ghz non-interference remote control with no delay, allows multiple RC cars for kids to race and battle at the same time, within the long distance range of 150ft. Creates more outdoor joy for multiple players.

Play Right out of Box - This RTR remote control car equipped with high-capacity 3.7V 500mAh battery and 1xUSB charging cable, prolongs a longer racing time. The RC cars for boys age 8-12 has been well-assembled, it’s ready for racing right out of box!

Control box

For EZ-Start 2

Replaces worn or damaged parts

Glow plugs nitro rc compatible with Traxxas T-maxx 3.3, TSUNAMI, VOLCANO STX, TORNADO S30, VOLCANO S30, AFTERSHOCK 21, HURRICANE XL, AFTERSHOCK 3.0, AFTERSHOCK 3.5, BACKDRAFT 3.5, CALDERA 3.0, EARTHQUAKE 3.0, EARTHQUAKE 3.5, HURRICANE XP, LANDSLIDE 21, LANDSLIDE LT, MAELSTROM LT, MONSOON XP, SANDSTORM 21, SANDSTORM LT, TWISTER LT, TYPHOON XP, REACTOR RS 3.3, VOLCANO MX, VOLCANO SV, VOLCANO T2, VORTEX SS, TORNADO BB.

Glow plug igniter:Hot 70117 Platinum/Iridium Super Spark Glow Plug N3 for RC Nitro Engines Car Truck Buggy.

RC glow plugs longer lasting Element, For 4c Engines 5% - 40% Nitro Fuels.

Recoil starter

Comes complete with screws

Fits TRX 2.5, 2.5R, 3.3

✔Replacement of 11003,Used with Electric Power Starter 70111,Compatible with SH Vertex .16, .18, . 21cxp Nitro Engines

✔Compatible with: Redcat Tornado S30, Volcano S30, Vortex SS, Lightning STR, Shockwave, ExceedRC, HSP 1/10 Nitro Car,etc. Check before buying,or contact us.

✔ Check size,Length:150mm, End diameter:5.8mm; Pins:M2*10

The highest quality RC products offered in the market today

Made using the highest quality materials and components

Tested for durability

Used with electric drill starters in kit 70111

Apply in 1:8 or 1:10 engine car ,off-road Truck ,off-road buggy,off-road car

Parts Name: Shaft rod pin end / Drill start wand

Rechargeable 1.2V 1800mAh Ni-Cd battery.

With battery charger brings much convenience.

Big/small cross multi-function Wrench.

Just Use Standard AA Batteries (Batteries Not Included)

Essential Nitro Engine Starter Tools

Compatible with Nitro Power RC Car Plane Helicopter Boat And so on

Screw Hole Distance:27mm;Compatible with Vertex 16, 18 and 21 Engines and also SH 18 and 21 CXP engines.

Compatible with 12 to 18 engines only.Suitable for Engine 12mm hex Diameter shaft,6mm one way bearing.(The one way bearing NOT include)

NOT FIT for engines larger than .18 (.19 + etc),Not suitable for 1/16 engines (.07 or .05 for example).

Compatible with:Vertex VX SH 16 18 21 Engines

Hex Nut:12mm

Compatible with Engine Diameter shaft:6mm

Rechargeable 1.2V 1800mAh Ni-Cd battery

With battery charger brings much convenience

Big/small cross multi-function Wrench

Suitable for 1/5HPI baja losi 5IVE-T DBXL Redcat FG GoPed

Pull Start Starter for HPI BAJA 5B 5T Rovan RC KM Losi 23CC 26CC 29CC 30.5CC engine

The aluminum metal turbine is more wear-resistant and has a longer service life. The distance between the mounting hole to hole is 67.5mm

Fits 23cc-32cc 1/5th Scale Rc Hobby Engines Only

weight : about 120 g

Suitable for RC car with VX 18 Replacement for Nitro Engines.

For 13.5mm Across Flat One Way Bearing, with 6mm shaft diameter.

he bolt hole size is 3mm,Please be notice this pull starter is not suit for all 16-21 Replacement for Nitro Engines, please make sure the size suit for you before order it.

Recoil starter

For TRX PRO.15 engine

Replaces worn or damaged parts

Fit HPI Rovan KM Baja 5B 5T SS Losi 5ive T, CY and zenoah engine

Accessory part fit for 1/10 HSP, HPI, Redcat, Volcano S30, Hobao, Kyosho, HongNor RC nitro vehicle

Please gently pull the start string and add some WAX on the string for durable use, otherwise it will be easily broken

Across center fixing hole (center to center): 27mm, please check the size before purchase

The 1/10 R020 pull starter compatible with HSP RC 1/10 nitro car engines parts tools.

Compatible with HSP Himoto Redcat Tyranno with CXP 18, VX 16 18 and SH 21 nitro engines

For 12mm Across Flat One Way Bearing, with 6mm shaft diameter.