Best Debialo in 2026

【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool.

【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple.

【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant.

【Protect Your Home Foundation】This yard drain can properly direct rainwater/water away from your foundation, avoid the water to drain back towards your home, also avoid the rain wash away the soil causing a leak or crack in your foundation. This yard drain is great for use as both an inlet and outlet for detention ponds, culverts, downspouts and numerous other applications. Prefect sump pump drain outlet.

【Reduce Stagnant Water & Freeze-Proof】Our yard drain design eliminates the standing water that occurs in the bottom of typical drop inlets. The drainage grates can prevent critters into the pipe and filling with nesting debris. Our drain grate is perfect for use in hard to drain areas where lack of grade difference is a problem, and works well in cold and frozen conditions. You must use a pvc schedule coupling/adapter/conversion or fitting bell to connect to our drain. (Coupling Not Included)

【Fix Landscape Drainage Problems】The oblique angled drainage grate blends perfectly with a sloped landscaped and holds up perfectly to lawn tractors. Low profile exit grate that keeps critters out of your drainage system without impeding the exodus of storm water. Great for drainage in grass and matches the color of grass and its presloped to work with the slope of the soil. Easy to mow over or around and virtually maintenance-free.

FORGED IN ONE PIECE – The most durable, longest lasting striking tools available

HIGH LEVERAGE DESIGN – Rounded head for added torque & increased leverage

REMOVES HEADLESS NAILS – Claw designed allow for headless nail removal with minimal wood damage

➤Premium Quality: Made of quality 40 CR material, each consists of two pieces of turned, hardened steel joined by a tightly coiled spring, will not easily break or deform. Anti-slip design comfortably delivers 3500PSI of striking impact force, making it a must-have for any carpenter or finisher

➤Double Ended: This set includes two dual head nail setter with head sizes of 3/32-inch and 1/8-inch

➤Common Applications: This dual head nail setter is designed to quickly and efficiently counter sink finish nails into wood surfaces. The dual-head design of this setter features the most popular sizes for trim and finish jobs, with a 1/8-inch head for larger nails and a 3/32-inch head for smaller pin nails

100 Pcs/Pack, Head Diameter [7/16 in] *** Full Length top the bottom [5/8 in] *** Shank Length under the cap to bottom [1/2 in]

Upholstery Tacks, Made by full automatic German machines with HQ Steel and Double layer electroplated

Strong and heavy weight items for upholstery industry

Punch nails out of hard woods and ideal for recycling wooden pallet or case

Removable Nails Range: 10-20 gauge

Powerful and durable for continuous use; comfortable rubber grip for fatigueless operation

FORGED IN ONE PIECE – The most durable, longest lasting prying tool available are crafted from a single piece of solid steel and honed into the optimal design for use.

HIGH LEVERAGE DESIGN - Engineered to produce maximum torque when pulling nails & prying boards.

REMOVES HEADLESS NAILS – The design of this cats paw nail puller allows for headless nail removal with minimal wood damage.

Include: 8" Nail puller and chisel scraper, 12” Nail Puller

Made of drop forged and heat-treated alloy steel for strength and durability

Corrosion-resistant black nickel plated finish

MADE WITH: We are serious with our quality when it comes to our tools. Gunpla Heavy-Duty End-Nipper Cutting Pliers is made with premium high-carbon, drop-forged, polished steel for durability and an electronic coating to help prevent rusting. The high leverage vinyl-dipped handles provide exceptional leverage and have a comfort-grip coating for firm command and control. It is sharp and safe.

APPLY ON: Gunpla Heavy-Duty End-Nipper Cutting Pliers has perfectly mated cutters with anvil and knife style edges designed for flush cutting steel wire(up to 1.2mm), spokes and other metals. Jaw clearance exceeds 24mm on this heavy-duty tool, which is precision-made with high-carbon steel for superb performance and lasting durability.

ONE OF KIND DESIGN: Gunpla Heavy-Duty End-Nipper Cutting Pliers has an 24mm jaw clearance to grip large objects. Uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting-edge life.

Nail extractor

Saw wrench

Nail pick

Multi-Tool: Trim puller, pry bar, bottle opener, wrench

Hardened steel: ASTM 1050 steel heat treatment surface, so removal tool will hold up well to repeated whacking

Silicone handle: Comfortable non-slip handle and has excellent shock absorption performance

FORGED IN ONE PIECE – The most durable, longest lasting prying tool available are crafted from a single piece of solid steel and honed into the optimal design for use.

LIGHTWEIGHT & DURABLE - Rounded build reduces weight & increases strength to make both carry and use simple and easy.

HIGH LEVERAGE DESIGN - Engineered to produce maximum torque when pulling nails & prying boards.

VERSATILE USE: The insulated cable lacing needle is xylan coated and designed to harness or lace multiple lead bundles

ERGONOMIC DESIGN: The needle has a lightweight molded grip handle for increased comfort and durability

HIGH DURABILITY: The tip is made of spring steel and coated with a xylan insulative coating for longer life

1. Durable: made of chromium-vanadium alloy steel,alloy steel is quenched and tempered again,rugged and durable.

2. High quality: comfortable anti-slip handle, lever principle,ergonomic design, labor saving and arthritis prevention.

3. Convenient and fast:Stiff and wear-resistant tines,easily lifting and removing stubborn tacks or staples or pad staples and panel nails,and so on various other nails.

➤Professional Hammerless Technology: Made of heat-treat hardened steel, Spring-loaded design, you can deliver 3500PSI of impact striking force without the need for a hammer, one replace two, make your work more efficient!

➤Double Ended: 2-IN-1 nail set covers the most popular nail sizes for finishing jobs, 1/32″head for smaller pin nails and 1/16″for larger nails

➤Safe & Easy to Use: Requires no bulky or blunt objects to be swung, working in areas a conventional hammer might not reach, perfect in tight spaces, does not damage the surface or trim

Mpn: 55-116

Country of manufacture: Taiwan

Manufacturer: Stanley

Material:Chrome vanadium steel alloy.

Size: Arbor Length: 102 mm/ 4 inch , Rod diameter: 3 mm/ 1.18 inch.

For extracting hard-to-remove nails.

Premium Material:This end cutting nipper is made of forged alloy tool steel Cr-Ni for long lasting performance, laquer treatment on surface to prevent rust

Sharp Jaw Cutting:Blades are induction hardened to HRC 58-64 for superior cutting performance and durability

Non-slip Handle:This 7 inch end niper plier with no-slip red cushion rounded handle offers comfortable grip

Size : 280mm

Product size (approx. mm) : 280x67x20

Material : S55C

Package includes: 2pcs Tack puller screwdrivers

The tack lifter measures 8.26 inch/210mm in total length, rod diameter 0.2 inch/5 mm and the arbor length is 3.93 inch/100mm

Material: metal

This Nail Puller Made Of High-Quality Metal For Extreme Strength & Durability

Gooseneck Design For Extra Prying Leverage

Thin Claw Gives You Access Into Hard-To-Reach Places

Hand-sharpened, double-tempered chromium high carbon steel blade will bite into any part of nail including headless nails

This product is easy to use easy to install and highly durable

Item is manufactured in China

Sturdy material: the tack lifter is made of CRV-chrome vanadium steel with acetate handle, providing sturdy strength and durability, easy and effective to remove staples

Package includes: you will receive 3 packs tack puller screwdriver, sufficient quantity to meet your needs; The screwdriver tools can easily take off staples from furniture, floor, wooden case, carton, photo frame, carpet and others

Size details: the tack lifter measures 185 mm/ 7.28 inch in total length, rod diameter 3 mm/ 1.12 inch and the arbor length is 102 mm/ 4 inch, proper size for removing tacks easily

Easily slips under and removes any size without breaking them, faster than pliers or screw driver.

Minimal effort is required even when shot from an air gun with leverage bar and bonus.

Safe for furniture and floors with a smooth, flat head and no other tools are needed for removal.

Built in rocker mechanism allows for ease of staple removal

User friendly right or left handed ergonomic ABS handle with thumb rest

Hardened steel head and probe for durability

Special Design for narrow spaces

Working Depth: 93mm

Jaw Thickness: 1.5mm

【Sturdy Material】— Tack lifter is made of CRV-chrome vanadium steel with acetate handle.Ergonomic design with leverage feature, super lightweight and non-slip design for comfortable use

【Package Includes】— You will receive 4 pack tack puller. Staple puller can easily take off staples from furniture, floor, wooden case, carton, photo frame, carpet and others.This staple lifter can not be applied to pry nail which is too tight or too big to avoid damaging the tool

【Effective Effort Saving】 — The tack lifter measures 188 mm/ 7.4 inch in total length.Adopts Labor-saving Lever design with 3.5" long handle, simply get all stubborn clips removed without damage, A Real Time and Effort Saver!

【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool.

【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple.

【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant.

High Quality: Drop forged from high quality tool steel. Strong, lightweight design for demanding construction use.

Efficient: The Nail Puller has a rounded edge that helps to develop high leverage to cut large diameter nails, and it's durable so you can use it in the workshop, on a farm or at home.

Cutting Capacity: Binding wire up to max 32 mm dia. It provides lapidary and construction woodworking users with the ability to quickly and easily remove stubborn wire from their projects

▶ Head Only & NO HANDLE - Save your back, your arms, and your sanity with this pallet pry bar tool head. This pallet buster tool straddles boards up to 4″ (101 mm);

▶ Quickly and easily disassemble pallets - After inserting a φ 1.415″ (36 mm) handle, the forks of the pallet buster can be inserted between the boards of a pallet or deck and ease them up without damage to the boards;

▶ Simple reliable locking pin - The locking pin is what holds the handle to the head of the pallet buster; This pin can go through the pre drilled holes in the head of tool and through the handle, ensuring that the two pieces never come apart while you are using it;