Best Dreamsourcelab in 2026

32 digital channels. Dual-mode support. In stream mode, data will be captured and transferred into PC memory in real time. With this mode, you can get long sample duration; In buffer mode, data will be captured and stored into on-board memory temporarily. With this mode, you can get a high sample rate.

USB 3.0 type-c interface. Up to 16G sample depth in stream mode. Support following stream modes: 1GHz @ 3 channels / 500MHz @ 6 channels / 250MHz @ 12 channels / 100MHz @ 30 channels / 50MHz @ 32 channels.

2Gbits on-board DDR3 memory. Support following buffer modes: 1GHz @ 8 channels / 500MHz @ 16 channels / 250MHz @ 32 channels.

2 analog channels, up to 100M front-end bandwidth and max 1GSa/s real-time sample rate. It's achieved by single-chip 1GHz ADC.

Ultra-portable size, so that you can put it in your shirt pocket. And it's shipped with a storage box for your convenience.

FPGA-based waveform processing engine. With 2Gbits hardware memory, it has 2M(single-channel) / 1M(dual-channel) sample depth in real-time mode, and 256M(single-channel) / 128(dual-channel) sample depth in single acquisition mode.

This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView.

Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.

The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.

The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions; 8-channel

Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;

The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions;

Oscilloscope (2 channel, 750ksps)

Arbitrary Waveform Generator (2 channel, 1MSPS per channel)

Power Supply (4.5 to 15V, 0.75W max output, with closed-loop feedback)

LA2016 is a high-performance logic analyzer with 16 full channels and 200MHz sampling rate.

It is composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc.

LA2016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved.

This kit contains 12pcs SMD IC 6 Colors Test Hook Clips which are ideal for using this 24MHz 8CH logic analyzer.

If you are doing microcontroller, ARM system, FPGA development, we highly recommend you purchase this product! This item will help you solve your problem when you do MCU related products, especially for UART, SPI, IIC and other communication debugging.

Compatible with the Logic analysis software and open source programs such. B. sigrok (protocol analysis of RS232, SPI, IIC, 1-Wire, etc.)

8 Digital/Analog inputs (multi-use)

Decode SPI, I2C, and 23+ more

Digital sample rate up to 500 MS/s, Analog sample rate up to 50 MS/s

8 Digital/Analog inputs (multi-use)

Decode SPI, I2C, and 23+ more analyzers

Digital sample rate up to 500 MS/s, Analog sample rate up to 50 MS/s

32 digital channels. Dual-mode support. In stream mode, data will be captured and transferred into PC memory in real time. With this mode, you can get long sample duration; In buffer mode, data will be captured and stored into on-board memory temporarily. With this mode, you can get a high sample rate.

USB 3.0 type-c interface. Up to 16G sample depth in stream mode. Support following stream modes: 1GHz @ 3 channels / 500MHz @ 6 channels / 250MHz @ 12 channels / 100MHz @ 30 channels / 50MHz @ 32 channels.

2Gbits on-board DDR3 memory. Support following buffer modes: 1GHz @ 8 channels / 500MHz @ 16 channels / 250MHz @ 32 channels.

Compact Design: Equipped with a rich 2.8" 320x240 TFT display and side thumbwheels allow for easy operation and navigation.

Wide Application: Analyze UART, I2C, SPI, and many other standard protocols accepted. This unit is specially designed for UART, SPI, I2C, and other communication debugging.

Portable: Its small form factor conveniently fits inside any pocket so it's always ready on the go!

16 Digital/Analog inputs (multi-use)

Decode SPI, I2C, and 23+ more

Digital sample rate up to 500 MS/s, Analog sample rate up to 50 MS/s

Two-channel USB digital oscilloscope

Two-channel arbitrary function generator

Stereo audio amplifier to drive external headphones or speakers with replicated AWG signals

Efficient: The combustion testing tool reliably measures the carbon monoxide and O2 level of furnaces and boilers, as well as temperature, draft and differential pressure

Durable: The flue gas meter is equipped with an extremely sensitive CO and O2 sensor with up to 6 years of life expectancy and a measuring range up to 4,000 ppm

Easy application: Start measuring from standby mode at the touch of a button. Extra strong magnets at the back of the meter enable a hands free and secure measuring operation

Diameter of clip is 0.13mm, the most delicate and smallest in the maket. It's very easy to connect to most of IC, Such as TSSOP, MSOP, SOP, TSSOP, QFP etc.

Comes with 10 dupont wires, can be flexible freely, easy to adapt to oscilloscope, logic  analyzer, IC tester, multimeter, signal generator, IC programmer and IC test frame.

Each Clip covered with insulating bush, they will not short-circuit with each other.

16-channel logic analyzer for 4-channel SIGLENT SDS1000X-E series scopes.

The scope requires firmware version 7.1.6.20 or greater.

Contains S.Bus controller, S.Bus cable, wiring harness and 20 digital clips.

★The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions; 8-channel.

★Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.

★Input voltage range: -0.5V to 5.25V; Input Low Voltage: -0.5V to 0.8V; Input High Voltage: 2.0V to 5.25V.

The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions; 8-channel

Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;

The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions;

【Product introduction】: This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software.

【Applicable to various occasions】: The logic sampling rate of each of the 8 channels is 24M/s, generally about 10M, which is sufficient for various occasions

【Channel value】: A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high.

【KEY SPECIFICATIONS】4 channel; Max Sample Rate:100Mhz; Minimum capture pulse width 10ns.

【PORTABLE】Ideal for beginner of electronic hobbyist with its small and compact that could be carried in the pocket, allowing you to achieve every detailed measurement anywhere and anytime.

【SCREEN AND BATTERY】integrated with 2.8 inch, 320x240 colorful display screen and 500mAh lithium rechargeable battery.

16-channel logic analyzer for SIGLENT SDS2000X scopes.

24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols

8-channel digital channel performance

Maximum sampling speed: 24Msps