Best Innomaker in 2026

LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz. Along with the PC software KingstVIS.

16 channels of digital signal could be sampled at the same time, and then they could be converted to digital waveform and displayed on the PC screen.

The signal could be analyzed with many standard protocols, to get more straightforward communication data.

The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.

Absolutely perfect to support all Raspberry Pi music playback system, like LibreElec, OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.

Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.

LA2016 is a high-performance logic analyzer with 16 full channels and 200MHz sampling rate.

It is composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc.

LA2016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved.

The Dual Channels Usb to Can Device compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop.

Support Windows System, Mac OS, Linux, Android, Venus OS, Raspbian(v5.4 kernel) and Ubuntu.

Plug and Play USB CAN device. No external power required. CAN baud rate from 20Kbps to 1Mbps can be programmed arbitrarily. Support for CAN bus 2.0A and 2.0B specification.

The HiFi AMP Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ through the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering required. Easy to get more beautiful and fantastic sound by this RPI+AMP HIFI suits.

Absolutely perfect to support all Raspberry Pi music player system, such as OSMC, Max2Play, RuneAudio, Volumio, Moode, Pi CorePlayer, Pi MusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.

On-board TAS5713 is a 25-W Class-D digital-audio power amplifier for driving stereo bridge-tied speakers. Offers low distortion and acoustically accurate audio reproduction.

Processor: Octavo Systems OSD3358

AM335x 1GHz ARM Cortex-A8 processor 512MB DDR3 RAM

4GB 8-bit eMMC flash storage Integrated power management

Diameter of clip is 0.13mm, the most delicate and smallest in the maket. It's very easy to connect to most of IC, Such as TSSOP, MSOP, SOP, TSSOP, QFP etc.

Comes with 10 dupont wires, can be flexible freely, easy to adapt to oscilloscope, logic  analyzer, IC tester, multimeter, signal generator, IC programmer and IC test frame.

Each Clip covered with insulating bush, they will not short-circuit with each other.

【RCA Input and 3.5mm AUX Output】Two RCA (R/L)input, plug and play. Help you to pick the music sources from music device to your headphone. Build-in circuit greatly improved the music quality. Not just like the other RCA to 3.5 mm headphone adapter.

【HiFi Headphone Amplifier】Build-in Amplifier chip to improve sound quality. THD+N = 0.001%@1kHz ,SNR greater than 108dB,fully filter noise.

【High impedance headphone support 】Support most headphone in the market, from 32Ω to 600Ω headphone.

Country of origin : China

Real-time sampling rate up to 1 gsa/use

IRecord length up to 14 Mpts

Package Weight :4.0 Kg

Standard Decoder: Iic, Spi, Uart/Rs232, Can, Lin

16 Digital Channels (Mso) (Four Channel Series Only, Option)

Parameter---HDS272 3.5 inch LCD automotive oscilloscope with 2 channel (oscilloscope+multimeter), 70MHz bandwidth, 250MS/s sample rate, 8K record length; 10,000 wfrms/s waveform refresh rate; 8 bits vertical resolution; 10mV/div - 10V/div vertical sensitivity; input coupling: DC, AC, and Ground.

2-in-1---2CH digital oscilloscope with 2 in 1 function, portable oscilloscope built-in multimeter is very handy. You can work well done with one device for your jobs or your experiments. At the same time, its detection date is very accurate, 20,000 count DMM, Scope update rate at 10k/s, perfect ranges of sweep time and vertical scales.

Crisp and Portable---Crisp and bright 3.5 inch color LCD screen, showing a higher resolution larger character display, even though in dim ambient light situations or outdoor environment, digital oscilloscope can be intuitive in its read. This handheld oscilloscope is portable and comfortably fits in the hand. It is much lighter, easier and perfect for field use. Practical and intuitive menu page layout, it is intuitive and handy in its use.

Parameter---HDS272S 3.5 inch LCD handheld oscilloscope with 2+1 channel (oscilloscope+multimeter+generator), 70MHz bandwidth, 250MS/s sample rate, 8K record length; 10,000 wfrms/s waveform refresh rate; 8 bits vertical resolution; 10mV/div - 10V/div vertical sensitivity; input coupling: DC, AC, and Ground.

3-in-1---2+1CH portable oscilloscope built-in multimeter and waveform generators are very convenient, 3 in 1 functional usb oscilloscope, you can get work well done without carrying multiple devices for your jobs. Owing accurate detection function, well triggering ability of waveform generators and useful oscilloscope and 20,000 count DMM.

Crisp and Portable---Crisp and bright 3.5 inch color LCD screen, showing a higher resolution larger character display, even though in dim ambient light situations or outdoor environment, digital oscilloscope can be intuitive in its read. This handheld oscilloscope is portable and comfortably fits in the hand. It is much lighter, easier and perfect for field use. Practical and intuitive menu page layout, it is intuitive and handy in its use.

High Precision with 4-Digit and Power Display: Kungber 30V 10A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions.

Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel.

Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power.

200 MHz Digital Oscilloscope with 2 channels, 1GS/s, 24Mpoint memory

Two channels

200 MHz bandwidth

Analog channel bandwidth:50 MHz

4 analog channels

Real-time sample rate up to 1 GSa/s

✅ OUR SIMPLEST, FASTEST TDS METER YET - Just dip in the meter, stir, and get your results in seconds. No calibration or setup needed, you can use it straight out of the box. Follow the step-by-step instructions then check the easy-to-read screen.

✅ UPGRADED ACCURACY THAT LASTS - With the titanium alloy probe and the latest sensors, you can get almost exact readings every time. What’s more, the meter can be easily recalibrated for extended precision whenever needed.

✅ SUITABLE FOR ANY TYPE OF TDS OR EC TESTING - Check the TDS or EC of your aquarium, pool, or any water source. You can determine the effectiveness of your RO, DI, or distillation unit, check the nutrient levels of your hydroponic setup, and more.

Measure capacitance and ESR

Suitable for any capacitor type between 1uF and 22000uF including motor capacitors, smoothing capacitors, electrolytics, polypropylenes, in fact any dielectric type

New enhanced dynamic range of 0.00 to 40.0 ohms

【Automatic power calculation】: adjustable DC power supply accuracy up to 0.01V and 0.001a, constant voltage (C.V.) and constant current (C.C.) mode automatic conversion and can automatically calculate power values according to voltage and current. In addition, the backlit 4-bit LED display provides more accurate readings of voltage and current values, which are easy to see even in low light conditions.

【5 V /2A USB interface】: Variable power has built-in quick charging protocol identification chip, supporting USB quick charging function, it has A 5 V / 2A output can be quickly charged mobile phones or other devices or used for charging equipment repair, very convenient.

【Safe and reliable】: with a variety of safety protection measures, including grounding wire, leakage protection, thermal protection, voltage overload, power overload, short circuit protection, and the power supply is equipped with intelligent temperature control fan and heat sink, heat dissipation effect is good, can effectively continue to work. Extend product life.

Scope 2204A 2 channel 10 MHz, 8-bit oscilloscope with probes

10 MHz bandwidth

1 GS/s sampling

Dual display. True RMS. Basic DC accuracy: 01 percent

Dcv/dci, acv/aci, 2/4 wire R, C, CONT, diode, freq, period, Temp

Built-in cold junction compensation for TC temperature measurements

FASTER SAMPLING SPEED - 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency. You will receive ET828 or LM2020, they are same product, have same function, LM2020 is our updated name.

MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40MΩ, Capacitance 0 ~ 100μf, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50Ω. Transistor amplification test to meet all test requirements.

MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately. To enable Quiet Mode (disable keypress beeps), press and hold the "F4" button and then rotate the rotary knob to turn on the instrument.

LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz. Along with the PC software KingstVIS.

16 channels of digital signal could be sampled at the same time, and then they could be converted to digital waveform and displayed on the PC screen.

The signal could be analyzed with many standard protocols, to get more straightforward communication data.

Scope Mode:The waveform refresh rate is up to 10000wfms / s. 2. Dual channel input, bandwidth up to 100MHZ, real-time sampling rate 250MSa / s, recording length up to 8k dots. 3. Cursor measurement function. 4.7 kinds of automatic measurement functions. 5. XY function. 6. One key automatic setting function, convenient for detecting and debugging.

Meter mode: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test. 2. Auto range function, convenient for testing and debugging. 3. The maximum input voltage is AC 750V, DC 1000V. 4. Independent multimeter and oscilloscope input. 5. Reading the wait function. 6. Relative measurement function.

USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. After connecting to the computer, the computer can recognize the oscilloscope as a USB flash drive and read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.

Oscilloscope (2 channel, 750ksps)

Arbitrary Waveform Generator (2 channel, 1MSPS per channel)

Power Supply (4.5 to 15V, 0.75W max output, with closed-loop feedback)

LA2016 is a high-performance logic analyzer with 16 full channels and 200MHz sampling rate.

It is composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc.

LA2016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved.

【Scope Mode】: 1. The waveform refresh rate is up to 10000wfms / s; 2. Oscilloscope 2 channel input, bandwidth up to 50MHZ, better signal reception. Real-time sampling rate 250MSa / s, recording length up to 8k dots; 3. Cursor measurement function; 4. 7 kinds of automatic measurement functions; 5. XY function; 6. One key automatic setting function, convenient for detecting and debugging.

【Meter Mode】: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test; 2. Auto range function, convenient for testing and debugging; 3. The maximum input voltage is AC 750V, DC 1000V; 4. Independent multimeter and oscilloscope input; 5. Reading the wait function; 6. Relative measurement function.

【Portable Oscilloscopes】: USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. The computer can read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.

Automatic frequency and amplitude measurement,Chinese and English language menu,Self-calibration function.

Type C power + data transfer interface, can share the charger and data cable with your mobile phone;AUTO one-key test.

USB interface.

100mhz, two-channel Digital oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education

Maximum real-time sample rate of 1GS/s and record length of 1Mpts (single channel)

New version of the SDS1102CML+ Includes improved higher resolution display