Best Highpoint Technologies in 2026

PCIe 3.0 x8 host Interface

16x 6Gb/s SAS/SATA ports (4x SFF-8643 ports)

Supports up to 16 NAS/Enterprise class 6Gb/s SAS/SATA HDD (spindle hard disk drives)

Fully Compliant with Industry standard PCIe 3.0 Slots

Integrated, High-Performance

Native, in-box NVMe driver support

Dedicated PCIe 3.0 x16 bus bandwidth

Dedicated PCIe 3.0 x4 bandwidth for Each NVMe M.2 SSD

Over 8x faster than NVMe storage locked behind Intel DMI 3.0

4x USB 3.2 10Gb/s Ports

PCIe 3.0 x4 Host Interface

Driverless Installation: Native XHCI Support

New Zero-Noise Cooling Solution

Best Cost/Performance NVMe RAID solution for Mac, Linux & Windows

Flexible solution: compatible with PCIe x8 and 16 slots

Major OS support includes Windows 7 and later, Windows Server 2008 and later,Linux (Support Linux Driver auto Compile), Mac OS X 10.6 and later.Driver embedded into Mac OS X 10.8 and later

2 External Mini-SAS ports. 6Gb/s (600MB/s) data transfer rate. RAID level 0, 1, 5, 6, 10, 50 and JBOD

Recommended External Mini-SAS to External Mini-SAS cable: EXT-MS-1MMS

PCIe 3.0 x8 host Interface

8x 12Gb/s SAS/SATA ports

Flexible SAS + SATA Storage configurations

PCIe 3.0 x8 host Interface

16x 12Gb/s SAS ports

Flexible SAS + SATA Storage configurations

Dedicated PCIe 4.0 x16 direct to CPU NVMe RAID Solutions

Truly Platform Independent & PCIe Gen 3 Compatible

Up to 8 M.2 NVMe PCIe 4.0 SSD’s

Thunderbolt 3 to NVMe RAID storage adapter

Supports up to 4x M.2 SSDs, and 8TB of capacity

Fast & Portable-sized NVMe Storage Solution

8x M.2 Ports Double Storage Capacity – up to 32TB

Dedicated PCIe 3.0 x16 Bandwidth

Truly Platform Independent NVMe RAID Solution for AMD & Intel motherboards with PCIe 3.0/4.0 x16 slots

4 M.2 Ports

Driverless NVMe RAID Solution

UEFI, CLI & WebGUI RAID Configuration & Management

4Xm.2 Pcie 4.0 Nvme Raid Card

Data Rate: 1.25Gb/s

Wavelength: 850-nm

Reach: up to 550 meters; Fiber Type: Dual LC OM3 multi-mode fiber

Raid Multi Insect Spray kills bugs on contact

Kills: Ants, Asian Lady Beetles, Boxelder Bugs, Carpet Beetles, Crickets, Firebrats, Fleas, Silverfish, Flies, Fruit Flies, Non-Biting Gnats, Hornets, Mosquitoes, Moths, Pillbugs, Roaches, Sow Bugs, Spiders** (except Black Widow and Brown Recluse Spiders), Wasps, and Waterbugs

Insect spray with no lingering chemical odor

Internal SAS SFF-8087 to 4x SATA Cable, 1-meter(3.3ft)

AWG30 Twinaxial 8-pair high-bandwidth low-skew wire

Impedance = 100 Ohms

4 Internal SATA 6Gb/s Ports

Compatible with SATA 6G, 3G and 1.5G Hard Drives

PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots

Internal SAS HD to Internal SAS HD Cable, with Sideband, 0.8-meter(2.6ft);

Impedance=100 Ohms;

Up to 12Gbps data rates;

Internal SAS SFF-8087 to Internal SAS SFF-8087 Cable, 0.5-Meter(1.6ft);

Impedance = 100 Ohms;

Up to 6Gbps data rates;

Internal SAS HD SFF-8643 to Internal SAS SFF-8087 Cable, 1-m(3.3ft);

Impedance=100 Ohms;

Up to 12Gbps data rates;

Internal SAS HD SFF-8643 to Internal SAS SFF-8087 Cable, 1-Meter(3.3ft);

Impedance = 100 Ohms;

Up to 12Gbps data rates;

IMPROVE STORAGE CAPACITY: This 2-Port PCIe SATA and eSATA Controller Card enables support of two internal SATA or external (eSATA) drives through PCI Express; A cost-effective solution to increase your system's storage capacity

ASM1061 CONTROLLER: This SATA and eSATA controller card features a dedicated chipset to enable two switchable SATA and eSATA 6Gbps ports via a single x1 PCIe slot; Supports FIS-based Port Multiplier, Command-based switching, NCQ, and ATA/ ATAPI commands

WIDE COMPATIBILITY: Supports Windows and standard SATA and eSATA SSDs (solid-state drives) and HDDs (hard drives); Supports SATA III (6 Gbps) and earlier revisions; Compliant with PCI Express 2.0

Lsi Logic 9211-8i Sgl Sas Raid Controller - Pci Express X8 - 600mbps Per Port - 2 X Sff-8087 Mini - Serial Attached Scsi Internal - Rohs Compliance

* Simple to Use : NO Driver required Plug and play, support 2.5 inch solid state drive, 2.5 inch mechanical hard drive, 2.5 inch Blu-ray drive, 3.5 inch mechanical hard drive, 3.5 inch Blu-ray drive, etc. It is widely applied as start-up disk, support hot swappable.

* SATA 3.0 & PCIE V3.0 : Support SATA transfer rate: SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps). Compliant with PCI-Express specification V3.0 and backward compatible with V2.0. PCI-Express X4 interface, and compatible with PCI-Express X4/X8/X16 slots(recommended to use under PCI-E 3.0, faster).

* 6 Ports Adapter Card --- You could add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card.(4X bidirectional bandwidth theoretical speed up to 8GB/S) ,Support Intelligent Sleep - If you do not operate the computer for 3 minutes, the hard disk will enters an automatic sleep mode , and will automatically activates when rewriting data.

✅ SSD Adapter: Connect a M Key PCIe M.2 SSD (NVMe or AHCI) to your computer through PCI Express for ultra-fast data access.

✅ Wide Compatibility: Compatible with PCIe 3.0 spec and backward compatible with PCIe 1.0 and PCIe 2.0 spec. It supports PCIe x4 bus slot and compatible with x8 / x16 bus slot

✅ Supported Sizes: Accommodates 2230, 2242, 2260 and 2280 form factor M.2 SSDs (NVMe or AHCI) via multiple mounting holes.

➤You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.

➤4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.

➤Chipset --- With using The Asmedia1062 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.

1.The FS-S4-Pro is a PCI express 3.0 X1 interface to 4-Ports 6 Gbps max speed SATA III expansion card. It allows users add 4X NONE-RAID SATA 3.0 storage or AHCI BOOT UP HDDs/SSDs on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS).

2. Select the ASMedia ASM1064 the most stable NONE-Raid PCIE 3.0 SATA III host controller. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI BOOT UP or storage HDDs/SSDs.

3. Plug and Play on Windows 11, 10, 8.x, 7, Vista, XP (32/64bit) and Windows Server 2022, 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64bit). MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems.

1. The FS-S6-Pro is a PCI express 3.0 X4 interface to 6-Ports 6 Gbps max speed SATA III expansion card. It allows users add 6X NONE-RAID SATA III storage or AHCI BOOT UP HDDs/SSDs on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS).

2. Select the ASMedia ASM1166 the most stable NONE-RAID PCIE 3.0 SATA III host controller. PCIE 3.0 X4 interface, provide 16Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI BOOT UP or storage for HDDs/SSDs.

3. Plug and Play on Windows 11, 10, 8.x, 7, Vista, XP (32/64bit) and Windows Server 2022, 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64). MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X, 10.9.x, 10.10.x, 10.11.x, 10.12.x, 10.13.x, 10.14.x, 10.15.x and most of Linux kernel systems.

Controller: LSI SAS 2008 6Gbps SAS/SATA HBA RAID Controller Card

PCIE 2.0 (6.0 Gb/s), X8 Lane; 2x Mini SAS SFF-8087 Ports

Up to 6 G SATA and SAS link rates, SAS 2.0 complian; Support 256 SAS and SATA device;

4 Internal SATA 6Gb/s Ports

Compatible with SATA 6G, 3G and 1.5G Hard Drives

PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots