Best Idsonix in 2026

HDD External Hard Drive Docking Station, Max Support 8TB

SATAIII/II/I External Hard Drive Enclosure, Compatible with Windows, Mac Os, Linux

USB 3.0 Hard Drive Disk External Enclosure, 5Gpbs SuperSpeed Data Transfer

Fits in any form factor desktop computer case with at least one standard 3.5" internal drive bay

Adapts 3.5" internal drive bay for use with up to two 2.5" SSDs

Supports 7mm and 9.5mm height standard SSDs

【SuperSpeed USB 3.1 with UASP】-- 2.5 USB C hdd enclosure is compatible with SATA III transmission protocol which is 70% faster than traditional USB3.0. The maximum data transfer rate of the USB 3.0 interface is 5Gbps;The blue LED indicator to let you know the working status of this hard disk enclosure easily

【Plug & Play】-- Tool free installation design makes you don't need any tools, With the detachable two cable USB-C to C and USB-A to C (50cm), it is quite flexible to connect more devices and support hot-swapping

【Transparent to Find】-- ORICO 2.5 hard drive enclosure is made by high quality PC transparent board which allows you to see the inside drive without opening it,monitoring all-round view when drive working

[USB3.1 6Gbps Enclosure] -- The 2.5 inch hard drive enclosure is adopted by usb3.1 port, with the high performance mater chip can helps the transmission rate reach up to the maxinum sata rate for 6Gbps, UASP protocol supported and much faster than traditional usb3.0 port,smooth transfer, no delay for the data

[Transparent Design] -- The external hard drive enclosure is made by high quality PC board with the advantage of anti shock and also helps you to monitoring the hard drive working status easily and distinguish the data you want, no need to open the enclosure cover

[Intelligent Detection of Auto-sleep] -- The usb3.1 hard drive enclosure with the function of 10 minutes auto sleep mode with no operation, which can greatly reducing the invalid energy consumption, prolonging the service life of the hard case and protect the hard drive data for you

Support 2 5"-3 5" drive bays

Compatible with all Corsair SSDs

Bays 1 x internal - 2 5"

Easy to See Which Drive Inside - ORICO 2.5 hard drive enclosure made of high-quality transparent crystal PC material. The clear ssd case design allows you to see the inside drive without opening it.

Portable Hard Drive Enclosure - ORICO external hard drive case can easily hook up your old 2.5inch SATA I/II/III hard drive to transfer files from one PC to another PC, laptop, PS4 or as a USB external hard drive. A 50cm USB-A cable is included for flexible connection and portability.

Super Easy to Use - Tool free installation. Plug & Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-Swappable. The blue LED indicator to let you know the working status of this hard disk enclosure easily.

Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable and x2 SATA Cables (Data) included

Screw pack included to mount the drives

Quick and easy installation

Super Fast 6Gbps UASP: SATA interface supports max transfer speeds up to 6Gbps and UASP accelerated transmission protocol. 70% Faster than traditional USB 3.0. Backward compatible with USB 2.0 and USB 1.1 ports.

2nd Gen USB 3.1 Port: Standard 2nd Gen USB C 3.1 with (7+15) Pin SATA III provides ultra-fast data transfer speeds of up to 6Gbps max. (Only USB-A to UAB-C Cable included)

Travel-Friendly External Storage: URGREEN hard drive enclosure connects your 2.5-inch SSD&HDD to a PC, laptop, game console, or router for easy data transfer. Get protection from scratches and data storage for SATA hard drives.

Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.

Suitable for 2.5” SATA/SSD;Supports Standard Notebook 2.5″ SATA and SATA II Hard drives

Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1

5Gbps Transfers with Accelerated UASP: Get up to 5Gbps transfer speeds with USB 3.0 ports. The SATA interface supports the UASP accelerated transmission protocol, which is 70% faster than the standalone USB 3.0 (connected to a UASP-supported computer). Backward compatible with USB 2.0 or 1.1 ports.

Safety & Stability: 2.5" hard drive enclosure adopts an advanced ASM1153E chip, built with short-circuit, over-current, and multi-protection to ensure safety for your SSD and valuable data, as well as supporting UASP/ Trim with fast transmission speed.

2.5" External Hard Drive Enclosure: Easily connect your 2.5-inch SSD & HDD to your PC, laptop, PS4, or Xbox for data transfer or expanding storage. Get protection for your hard disk from scratches and portable SATA data storage. Great for booting up old HDD/SSDs and recovering essential files from older PCs.

【Applicable SSD 】- This M.2 SSD Enclosure only for NVMe PCIE SATA M-Key / B+M connectors M.2 SSD. Applicable to sizes 2242 / 2260 / 2280 solid state drivers. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Note: NVMe and SATA SSD are not included.

【Type C interface】- Both side can be inserted; M.2 NVME recommends USB-C Gen 2 10Gbps or Thunderbolt 3 for extreme speed performance. One HD movie transfer only takes 2 seconds; Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps.

【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry. Package includes 2 x Thermal Pad，both USB Type-C and USB 3.0 (Type-A) cables, and a Screw Driver.

Supports all 2.5 and 3.5-inch SATA drives

Connects via SuperSpeed USB 3.0 (up to 10x as fast as USB 2.0)

UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system

Two built-in M.2 2280 NVMe SSD slots permit cache acceleration without occupying storage drive bays.

Intel quad-core processor with AES-NI hardware encryption engine, over 225 MB/s sequential read and write throughput.

4 GB DDR4 memory (expandable up to 8 GB); Scalable up to 9 drives with Synology DX517

Convert 2.5 SATA SSD to a portable USB C HDD enclosure, easily connect to PC, laptop for data transfer. USB 3.1 GEN 1 Superspeed Max 5GBPS, support UASP. NOTE: The actual transmission speed is affected by different working environments.

USB Type-C 2.5 hard drive enclosure, fits for 7.5mm/9mm SATA drive and capacity up to 2TBs.

Easy installation, plug and play, USB C interface for easy use without worry about plugging in wrong side. Dual LED working lights, convenient to view working status.

Product Name: Junction Box, Electrical Boxes ; Waterproof Rating: IP65.

Outer Size of electrical enclosure: 3.94" x 2.68" x 1.97"(100X68X50mm)(L*W*H); Inner Size of electrical enclosure: 3.7" x 2.4" x 1.7" (93 x 60 x 42 mm)(L*W*H) - - (Allowable Error: ±2mm).

Electric Enclosure Material: ABS, Rubber

USB Type-C 3 2 Gen 2 for transfer speeds up to 10 Gbps

Supports M 2 PCIe NVM Express SSDs with 2230/2242/2260/2280 form factor M 2 NVMe SSD not included

Two Cables Included – 1x USB Type-C cable 1x USB Type-C to USB Type-A cable

Encrypted sequential throughput performance at over 113 MB/s reading and 112 MB/s writing

Dual-core Processor with AES-NI encryption engine

2GB DDR3L memory (expandable up to 6GB)

Featured dual 1GbE LAN ports to support network failover, and with Link Aggregation enabled, DS220+ provides over 225 MB/s sequential read and 192 MB/s sequential write throughput. Data can be further protected with RAID 1 disk mirroring to prevent sudden drive failure.

Intel dual-core processor with AES-NI hardware encryption engine; 2 GB DDR4 memory (expandable up to 6 GB)

Access, share, and sync your data easily across different operating systems and devices.

Leverage built-in file and photo management, data protection, and surveillance solutions

Access, share, and sync your data and media easily across different operating systems and devices

Check Synology knowledge center or YouTube channel for help on product setup and additional information

One-Key Switch

Tool-free user friendly design

IP54 water & dust resistance

Interface: USB 3 Gen2 Type-C 10Gbps

Support Type: M.2 PCIe/SATA 2230/2242/2280

Includes: Type-C to Type-C and Type-C to Type-A cables

Compatible with any 2.5-Inch SATA hard drive or Solid State drive

Fits all 3.5-Inch SATA drive bays

Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives

Dimensions: 33.75" H x 37" W x 25.13" L | Bar Spacing: 2.25''. Inside dimensions-35¾ L x 23½ W x 24½ H inches

20-Gauge Steel Cage – This ProSelect Empire dog cage is extremely strong with reinforced 0.5-inch diameter steel tubes and 20-gauge steel

Medium-Sized Cage – (26 - 40 lbs)

Accelerated Performance - 177% higher 4K random read IOPS and 76% faster sequential write speeds compared to its predecessor

Maximize Performance - Turbocharge HDD arrays by 20x or more without occupying drive bays using dual built-in M.2 slots for NVMe SSD cache

Expansion Made Easy - Scale-up on-demand to 18 drives with two DX517 expansion units

Online volume expansion

Dedicated local backup solution

Hot-swappable drive tray design

Combine built-in 10GbE and optional high-speed NIC for over 3,100 MB/s sequential read performance

Built-in M.2 2280 NVMe SSD slots permit cache acceleration without using storage drive bays

Flexibly scale up to 16 drives to increase storage capacity as demand grows

NO ASSEMBLY REQUIRED: this 4U vertical rack arrives fully assembled with cage screws and nuts for mounting equipment.

PRODUCT SIZE: 4U; W 19.29" x D 7.56" x H 3.94", compatible with Most 19" Rack Mountable Equipment

VERSATILE FUNCTIONALITY: Besides vertically mounting onto wall, this bracket enables your server or networking equipment horizontally under a desk for added versatility. Including almost all screws for assembly onto wood wall, desk or concrete wall.

WORK WITH- This tray can be used all DELL PowerEdge servers that use 2.5 inch SAS/SATA hotswap drives, compatible part number P/N: 08FKXC/ G176J / 0G176J / G281D / 0G281D / WX387

COMPATIBLE MODELS- This tray is compatible with DELL PowerEdge: 14th Gen T440 T640 13th Gen R330 R430 T430 R630 T630 R730 R730XD R830 R930 XC630 XC730 XC730xd. 12th Gen R320 R420 T420 T620 R620 R720 R720XD R820 R920. 11th Gen R310 R410 R415 R510 R515 R610 M610 T710 R710 M710 R715 R810 R815 R910 M910

EASY TO INSTALL- This hard drive tray is with SAS/ SATA disk port, support hot-plug, easy to install

This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds.

Plug and play no drivers required.

Exclusively designed for M.2 NGFF SATA SSD B or B+M Key.

External Hard Drive Enclosure: This 3.5" hard drive enclosure easily connects your 3.5 /2.5 inch hard drive to a PC, laptop, and other devices for massive data transfers and up to 20TB portable storage. Hard drive enclosure protects a hard disk from scratches and maximizes the use of 3.5"/2.5" HDD/SSD for comprehensive protection of valuable data.

5Gbps High Transfer Speeds: Get 5Gbps transfers with the HDD enclosure. Supported by UASP accelerated transmission protocol, it gets speeds 70% faster than traditional standalone USB 3.0 readers. Backward compatible with USB2.0 and USB1.1 ports.

Interlligent Chip & Better Protection: Built-in with interlligent chip for better performance and high-quality ABS to hold hard drives firmly. Soft rubber strips provide anti-shock protection. Pre-set heat emission holes allow for excellent heat dissipation. Auto-Sleep mode ensures an extended lifespan for your hard drives.