Best Incriminator Audio in 2026

For those of you demanding a full system solution in a single amplifier from Incriminator Audio, we heard you. We are very proud to present to you, the all new, IX17.5, our first 5-channel amp that will truly power your entire system. This IX17.5 is the answer for those who don’t have the extra space for multiple amplifiers but do not want to sacrifice power and quality. When a multi-channel amp has 1/0 power and ground connections, you know it is something special.

The IX17.5 is not one of those pretenders, as we are bringing a full 125 watts per channel at 4 ohms, and it jumps up to 210 watts at 2 ohms stereo for even the most power-hungry mids and highs. Then we took the 5th channel seriously, with 1200 watts @ 1 ohm mono. That is more than enough power for an outstanding daily driver system that includes the subs.

We didn’t skimp on the features, the IX17.5 has a full crossover network, separate gains for the front & rear & sub, as well as 1 ohm stability for the 5th channel. This amp will not only save you space, but also save you time on wiring and signal connections. Simplify your life and your install with the awesome IX17.5 from Incriminator Audio.

Introducing the first ever, Incriminator Audio Bolo. There has long been a need for an affordable premium subwoofer option in the 750 watt class. We felt, with so many years of excellent performance from our Lethal Injection, we knew we had a big leg up when starting the Bolo development. Our IA Bolo will be the go to sub for those who want an outstanding brand that puts everything into design and performance, without needing massive amounts of power or spending too much savings. The Bolo is very musical for the full range of sub notes on every type of music, but can also get down when you want to blur your mirrors and have some fun with the volume.

After quite a number of requests, we have finally filled the void between the amazing entry level i-Series, and the venerable Lethal Injection. The Bolo now gives Incriminator fans a killer option for a modestly powered install or an efficient option for a large quantity of sub builds. A perfect match with a pair of Bolo’s and a 2,000 watt monoblock. To set the Bolo apart and above the competition in its class, we went with a larger 2.75” voice coil. Giving the Bolo greater power handling in all kinds of conditions and installs that the competition can’t touch.

To match the reserved looks of its brothers, the Bolo has the classic and clean appearance you come to expect from us. Stitched cone to surround connection, aids in mechanical durability for years of performance, even in heavily used installs. A rear vented motor and basket venting keeps the coil and motor assembly cool under intense thermal times. Push terminals, progressive spiders, sewn leads, double stack motor, air-driven cooling etc. we could go on all day. But you can have peace of mind, we didn’t cut corners when it came to making simply one of the best all around, daily driving, musical subwoofer options on the market.

The all new Incriminator Audio IX3.4 is the new answer to compact, premium 4 channel amplifiers. All the features of the outstanding IA 3.4 but with more power and less size, updated to the new IX series standards. When we say compact, we are not joking around. The new IX3.4 is trimmed down to a miniscule footprint of less than 8”. That saves you space but doesn’t cut down on the traditional high quality build we are known for in our world famous amps.

One thing you don’t have to worry about is the crossovers, as we still have the same level of flexibility in the crossover network our customers have come to expect from our multi-channel amplifiers. Which means, you will have high-pass / full range / low-pass crossover settings for both pairs of channels, as well as subsonic filter.

We didn’t stop at the size, why not improve the power too? That is exactly what we did, by bumping up the power on the IX3.4 to 100 watts x 4 channels at 4 ohm and 340 watts x 2 at 4 ohms. The great news is the new Class-D design is very efficient and very low distortion, so you will only need a mere 50 amps of fusing for the all new IX3.4 while hearing all the right notes.

Improving on the compact amazingness that was the IA6.4, we bring you the all new IX6.4 that takes it to the next level in every sense. In a space of just 11” long, we were able to wring out 150 watts a channel at 4 ohms, and a whopping 500 watts by 2 channels at 4 ohms. That means, you could power a pair of subwoofers with ease, using the IX6.4 if you wanted to. Don’t forget, the IX6.4 comes with a bass remote for just this purpose.

Not wanting a complex set up to deal with? You could use the IX6.4 as a full system solution with components on the front channels, while powering a strong subwoofer bridged on the rear 2 channels.

Our amps have always been loaded with features. For example, the IX6.4 comes with a mirror feature where you can match everything you set on channels 1&2, mirrored over to channels 3&4. Another great feature is the separate clipping indicators, one for channels 1&2, and another for channels 3&4. A feature on our IX6.4 that is standard to our multi-channel amplifiers is the fully active capable, crossover network.

The flagship of our IX-series monoblock amplifiers, is the all-new, from the ground up, IX3.1. People kept asking, “I have a pair of Death Row subs, what amp should I run?” or “I have an IA Judge sub, what is the best amp?” Now you have that answer in the Incriminator Audio IX3.1, muscling up with 3,000 watts on tap to more than get the job done.

The IX3.1 is feature packed, with a bass remote that has a clipping light for control at your fingertips, an advanced crossover network to dial in the performance you want, and is fully strapable if you feel the need to get nuts and double up on a pair of IX3.1’s. No corners were cut when it came to designing the best 3,000 watt, compact monoblock on the market.

When you see specs like 16v capable, 8 gauge speaker wire outs, and 1/0 power & ground connections, you know right away, this IX3.1 was meant for one purpose only. Pure, clean, and controlled power, from a premium build, that is what you will always get when it comes to the IX3.1. Not only do you expect an amp of this quality and performance, but we expect it from ourselves. That is why we are very proud of the IX3.1 flagship monoblock amplifier.

Bass Restoration Processor, Included ACR-1 Remote Level Control & 20' RJ-14 Cable

Enhanced bass output: The device restores low-end frequencies and provides a more dynamic and immersive listening experience.

Built-in bass maximization circuit: The circuit allows you to adjust the frequency response and control the level of the bass output.

Class D MOSFET Monoblock Power Amplifier

Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts

Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz

High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.

Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.

Detachable sliding terminal cover offers a sleek design and easier installation.

160 watts RMS x 2

variable low- and high-pass filters

selectable bass boost

Input Sensitivity: 125mV–5V (Low Level) / 1V–40V (High Level)

Signal-to-Noise Ratio: 95dB

Frequency Response (Hz): 10Hz-20kHz

✔Suitable for Oticon miniFIT RITE receiver wires such as Oticon Alta, Nera and Ria RITE and miniRITE

✔Pack of 3 / 6 wax guard filters sets

✔Grey dial works as a removal tool

The Punch P1000X5 is an ultra-efficient 5-channel amplifier (2.38” x 7.76” x 15.03”) capable of running your entire system without excessive drain on your charging system and rocking 1000 watts of RMS power

Perfect for running a front/rear system and a dedicated subwoofer (RMS Power Output: 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm OR 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm OR N/A + 500 Watts @ 1-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter and tri-stage protection that covers thermal, over-current and short circuits

The Punch P1000X1bd is a full chassis (2.38” x 7.76” x 13.28”) mono amplifier optimized for subwoofers only, that pumps out a whopping 1,000 Watts into a 1-Ohm load

Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 300 Watts x 1 @ 4-Ohm OR 500 Watts x 1 @ 2-Ohm OR 1000 Watts x 1 @ 1-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter

The R2-750X5 full-range class-D 5-channel amplifier (1.9" x 6.8" x 11.2") is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

The R2-300X4 full-range class-D 4-channel amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 300 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 @ 4Ω OR 75 Watts x 4 @ 2Ω OR 150 Watts x 2 @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Includes: Amplifier. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Features: Rockville dB45 3200 Watt/800 Watt Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp, Loud!!.

Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 200 Watts x 4 Channel <1% THD+N . - 4 Ohm:135 Watts x 4 Channel <1% THD+N. - 4 Ohm Bridged: 400Watts x 2 Channel<1% THD+N.

1. For brands: Phonak, Resound, Widex, Unitron, Jungle Care, and more. You could get confirmation by click "Ask a question" in our Amazon's storefront page.

2. Quantity: We offer two options for each color - 5-pack (40 filters) & 10-pack (80 filters)

3. Easy to use: Just follow the picture guide or the description as below stated.

550 W MAX Power @ 2 Ohm x 4 Channels

275 W MAX Power @ 4 Ohm x 4 Channels

1100 W MAX Bridged Power @ 4 Ohm x 2 Channels

Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

650 W MAX Power @ 2 Ohm x 4 Channels

325 W MAX Power @ 4 Ohm x 4 Channels

1300 W MAX Bridged Power @ 4 Ohm x 2 Channels

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.

Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Belva Complete 4 Gauge Amp Kit with 4 ch. RCA

Competition Grade Class D MOSFET Power Amplifier

Peak Power at 1 Ohm: 5, 400 Watts | RMS Power at 1 Ohm: 3, 500 Watts

Stable at 1 ohm | Remote Subwoofer Level Control Included

High and low pass filter

Bass EQ

600W Max Power

The Punch P600X4 600 watt 4-channel amplifier (2.38” x 7.76” x 13.28") is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels

Versatile multi-channel design can power just about any audio system configuration (RMS Power Output: 75 Watts x 4 @ 4-Ohm OR 150 Watts x 4 @ 2-Ohm OR 300 Watts x 2 @ 4-Ohm Bridged)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter

✔FIT FOR ALL- This cleaning kit is suitable for all hearing aids, hearing amplifier, Apple AirPods, iPhone earbuds and other regular earphones and headphones. This cleaner set includes all the necessary tools to properly and quickly clean and remove earwax, moisture and dirt on your devices.

✔ALL IN ONE- This earphone cleaner includes 8 pieces: 3 different cleaning brushes, a tube/vent cleaner, a disassembly tool, a screw driver, a cleaning cloth and a zip-up case. This tool kit is intelligently designed to meet all potential cleaning need and ensure fast and effective cleaning.

✔NICE AND CONVENIENT- All brushes and tools are delicately packed in a nice and small zipping case that can be easily put into your pocket, handbag or other bags. You can carry it to anywhere in anytime. This cleaning kit will keep your hearing aids from earwax and moisture, prevent damage and minimize maintenance or replacement of your hearing aids.

Excellent for voice as well as bass

2 ohms

400 watts

Our compact (1.6” x 4.3” x 8.3”) Power Marine TM400X4ad 4-channel amplifier produces more power per square inch than any other model we make with 400 Watts of POWER

Proprietary Constant Power amps are the most powerful on the market, delivering up to 25% more power across all impedance loads (100 Watts x 4 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm or 200 Watts x 2 @ 4-Ohm Bridged)

Built on Rockford Fosgate’s proprietary Class-AD technology and Element Ready protecting against dust, UV, and corrosion, making it perfect for motorsport and marine applications

New Kenwood 4 channel Bluetooth marine atv motorcycle amplifier (kacm1824bt)

45 watts x 4 at 4 ohms

Peak power: 400 watts