Best Iorion in 2026

AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement

The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time

AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more

AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement

The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time

AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more

Belts are precision ground, not cut, so they fit the pulley with absolute perfection

Model Number: 410-5M-15

Item Package Length: 9.9999999898"

Item Package Width: 8.949999990871"

✿150XL037 Timing Belt: The package contains 2 x 150XL037 drive belt, teeth qty: 75, teeth pitch: 0.19" / 5mm, belt width: 3/8" / 10mm, belt internal perimeter: 15" / 381mm.

✿Neoprene Body: 150XL037 belt main body is made of neoprene, without lubrication or re-tensioning, can resist dust, grease, oil and moisture.

✿Smooth Transmission: The tooth surface of the XL timing belt is made of nylon, with smooth transmission, low noise, and can transmit power at a constant speed without slipping.

Timing belt: The timing belt is made of premium rubber, durable and flexible. It's designed specifically for linear motion, high positioning accuracy. Round tooth profile guarantees that the belt tooth fits smoothly.

Pulley: It’s used together with timing belt, very convenient to use. 20 Teeth contact with the belt, that minimizes the chance of the belt slipping.

Locking Spring: With the springs, you can add the right tension you need and make your prints much more precise.

Belts are precision ground, not cut, so they fit the pulley with absolute perfection

3D printer belt material : Rubber

Belt 3D printer width: 6mm

Model: Gt2 belt

Model Number: 10M Rubber Opening Timing belt, 3d printer accessories.

Upgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Arc tooth minimizes the chance of the belt slipping, runs quieter. Nice smooth movements.

Wide range of applications: Widely used in 3D printers, such as ender 5 plus, Vorn Series, Prus MK3S, Anycubi Vyperr, milling machines, gear forming machines, drilling machines, CNC lathes, hobbing machines, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, any diode laser, and other mechanical transmissions.

Material: High quality Aluminum,sturdy and durable, adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively

Tooth timing blet pulley, use with 20 Teeth 5mm bore idler pulley

Use High-quality Motor-grade bearings to ensure that the machine is works good

UPGRADED ANTI-SLIP VERSION: The tooth surface of the belt is made up of specially treated tooth cloth that minimizes the chance of the belt slipping.

Stable Transmission: High precision. High-strength structural design, anti-extension, anti-jumping, make the transmission more stable.

Long Service Life: Wear resistant. Anti-wear nylon tooth surface for better protection of the tooth joint and extended service life.

Total solution for any application: Includes belts, idler(s), tensioners, tensioner springs, water pump, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications

Water pumps are designed and built for long lasting, efficient cooling

Hydraulic tensioners included, where needed

100% Brand new and high quality, aluminum, adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively

Toothless timing belt pulley, use with 20T 5mm bore idler pulley

Use high-quality mMotor-grade bearings to ensure that the machine is works good

THIS KIT INCLUDES: Timing Belt, Timing Seal, Cam Seal, Timing Belt Tensioner Bearings, Water Pump

FITS: 96-04 Nissan, Infiniti / Frontier, Xterra, QX4, Pathfinder 3.3L SOHC Naturally Aspirated, Supercharged

FITMENT NOTES: 34x48x7, FS, 3/87, , Premium, Bearing, , Bearing, Front

【High Quality Material】 Timing Belt is 100% original from Creality, high-quality timing belt, GT2 timing belt is made of PU material, soft and durable, high wear resistance and good crack resistance, long anti-wear life.

【Durable and Flexible】 GT2 belt 6mm is made of high-quality rubber, fiber reinforced, durable and flexible. The GT2 timing belt combined with the GT2 pulley provides perfect and precise linear functions for your 3D printer.

【Easy Installation】 Easy to install and maintain, each joint of the chain can be opened, and the length can be adjusted according to your needs.

Made of PU material and steel core, very flexible and strong

Compared with 2GT black belt with glass fiber core, strong steel core wires are joined in this white belt

Excellent process , Small Tolerances

Neoprene body for resistance to dirt, grease, oil, and moisture

Fiberglass tensile cord for strength, durability, and resistance to elongation

Nylon tooth facing for quieter operation and resistance to wear

Circular arc Tooth Profile Tooth Space is Small, Suitable for Straight Line Driving.

2GT System is an Extension of The HTD System With Greater Load Carrying Capacity.

Breaking Strength: 86 N per 1 mm (62 lbs. per 1/8") Belt Width.

Belts are precision ground, not cut, so they fit the pulley with absolute perfection

Product Name : Timing Belt;Type : 130XL

Number of Teeth : 65;Pitch : 5.08mm

Belt Width : 10mm / 0.39";Belt Girth : 330.20mm /13"

Belts are precision ground, not cut, so they fit the pulley with absolute perfection

PTFE-infused jackets to reduce frictional losses and tooth shear

High-grade HNBR rubber for superior heat and resistance

Premium tensile members providing maximum strength

Belts are precision ground, not cut, so they fit the pulley with absolute perfection

PTFE-infused jackets to reduce frictional losses and tooth shear

High-grade HNBR rubber for superior heat and contamination resistance

Premium tensile members providing maximum strength

Country of Origin : China

Product type - outdoor living

Timing belt xl 0.37 x 16In PL T80

Fits:Timing Belt Kit Water Pump fit for for Chevrolet 2009-2011 Aveo Aveo5 & 2012-2014 Cruze & 2012-2013 Sonic, Pontiac 2009-2010 G3, Saturn 2008-2009 Astra, Suzuki 2009 Swift+, please confirm this item fits for your vehicle before purchasing (Check Fitment Data Above or see description below)

Package Includes:1 Timing Belt ( 146 Teeth), 2 Tensioner, 1 Water Pump

Part Numbers:K015603XS

Model: 140Xl; Belt Width: 10mm / 3/8"; Teeth Quantity: 70; Circumference: 355mm / 1.2ft;

Pitch: 5.08mm / 0.2"; Belt Thickness: 2.3mm / 0.09"; Teeth Height: 1.27mm / 0.05".

Main Color: Black; Shape: Closed Loop; Material: Rubber.

Fit for CNC machines,Laser Machine,Engraving Machine;

HTD 3M Open Ended Timing Belt for high torque transmission;

Temperature Range:-30°F to 185°F (-34°C to 85°C)