Best Kimllier in 2026

Size: Metric size - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm

Material: Steel body and chrome vanadium gear flex-head double ended combination ratchet spanner set - open ended and flex-ratchet ring heads

Design: Ratcheting wrench 180 degree pivoting flex head with 5 degree gearing for reducing fatigue and easy control, comes in a tool bag for storage and easy transportation

C-Clamp is made of alloy steel. After heat treatment, it has high hardness, durability and long service life.

The clamp head and the clamp head of the c-pliers are connected by rivets. The process is fine and not easy to deform and fall off.

Heavy-duty locking pliers use high strength springs, which are comfortable to grip, more human fitting design, and easier to use.

Size: All are 4 inch long and 1/8 inch wide or thick

Material: Made from high quality tool steel stress relief against distortion, precision ground and hardened

Accuracy: +/- 0.0002 inch in parallelism and height

The adjustable reamer has an adjustment range of 29.5-33.5mm(1.16-1.32 inch).

The adjustable hand reamer is made of high speed steel with good hardness and toughness, good wear resistance and can be used for a long time.

The hand reamer can improve the machining precision of the hole and reduce the surface roughness.

Size: Jaws width - 5 inch, jaws opening - 5 inch

Material: Heavy duty cast steel construction, hardened and polished replaceable jaws and large anvil

Design: 360 Degree double locking swivel base allow you to get the angle on your workpiece

Structural Features: Full round head stainless steel ring shank coil roofing nails

Size: Each count of the wire coil nail is 2-1/2 Inch x .090-Inch, for use with most of 15 degree coil siding and fencing nailers

Corrosion Protection: It is made of stainless steel which can offer superior corrosion protection

Product: The set features 17 individual steel blocks of various angles, angle range +/-20 inch

Features: Hardened steel material, precision grinding

Application: For precise angular alignment and measurement for grinder and milling applications

Performance: Heavy duty hand winch pulling capacity up to 600lbs, gear ration 4.1:1

Material: Heavy duty steel construction, hardened steel gears with a zinc-plated finish for maximum strength and longevity that resists rust and corrosion

Design: Anti-slip handle for cranking easier and reduces hand fatigue, two-way ratchet, this manual winch is fitted with a sturdy safety pawl that allows forward and reverse ratcheting

Product includes 11 high speed adjustable hand reamers H4-H14 and the reamer range is 15/32 inch to 1-1/2 inch to meet your needs of different sizes

Adjustable reamer made of high speed steel, good hardness, toughness, sharp and durable

This adjustable hinge tool overall molding, improve the cutting efficiency, easy to cut

Range: 1/32, 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8-inch

Application: For CNC milling Lathe Tool Work holding Engraving machine

Material: These spring collets are made of high quality carbonsteel, they are stable and practical in performance

Oscillating Tool Blades: 100pcs 1.3 X 3.5 inch longer wavy tooth oscillating tool blades. Efficient cutting of the wood and plastic material

Material: Made of high carbon steel and alloy steel, it is more tough, thicker, wear-resistant and cutting resistant

Cutting Design: Built in length marks on both sides, inches on one side and centimeters on the other side, ensure you can cut accurately and quickly during use

Opening capacity Jaws of C-Clamp is 3.25 inch, handle length is 6.69 inches, total length is 11 inches.

Locking C-Clamp is made of 45 steel after heat treatment stamping processing, strong durability, tensile strength, high hardness, not easy to deformation.

The C-Clamp locking can be fine-tuned with screws to easy adjustment to the proper clamping size.

Length of the c-clamp: 11 inch, width of c-pliers: 5.7 inch, open jaw of the heavy-duty locking pliers: about 3.14 inch.

C-Clamp is made of alloy steel. After heat treatment, it has high hardness, durability and long service life.

The clamp head and the clamp head of the c-pliers are connected by rivets. The process is fine and not easy to deform and fall off.

Measuring range: 2-3 inch, Accuracy: 0.0001 inch

Material: Hardened and ground spindle with carbide anvil ensure durability and accuracy

Strength: Laser etched graduations and satin chrome finish for super precision and no glare

Products include 9 high-speed adjustable hand reamer and the reamer range is 11.75 - 29.5 mm to meet your needs of different sizes

Adjustable reamer made of high speed steel, good hardness, toughness, sharp and durable

This adjustable hinge tool overall molding, improve the cutting efficiency, easy to cut

The regulator is made of Forged brass, durable and reliable to use.

Oxygen CGA 540 / Propane CGA 510. (Random delivery in blue and green).

9/16Inch - 18 LH type B-B outlet fitting connect to hose.

The length of tie-down straps: 15ft, the width of tie-down straps: 2 inch, the breaking strength: 5000lbs, the working load limit: 1670 lbs.

Cargo tie-down straps made of high strength steel, galvanized, more durable, not easy to rust, prolong service life.

Tie-down straps is made of polyester webbing, encrypted knitting, integrated molding, more hard-wearing, strong bearing capacity.

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

Includes 15-pc. combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Wrench holder

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

CORROSION RESISTANCE: Full Polish Chrome Finish

QUICK ENGAGEMENT: 12 Point Box End with fastener

ADDITIONAL KNUCKLE CLEARANCE: 15° Box End Offset

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

72-tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches

Flush mounted reversing lever allows you to change direction without removing the wrench

Off-corner loading design on box end provides better grip and reduces fastener rounding

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

PATENTED DESIGN: Patented open-ended head allows easy access to connectors, nuts, and bolts

PRECISION TORQUE: Ratcheting box-end has 12 points of contact to provide maximum torque

CONVENIENT FUNCTIONS: Belt loop hole for convenient storage and transportation

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

Compact reversing lever - no need to remove from fastener to change direction

Surface Drive design nearly eliminates fastener rounding

15% off-set provides additional knuckle clearance

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access