Best Accusize Industrial Tools Hand Reamers in 2026

Ideal for reaming on stainless steel and copper tubing

45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes

Hardened steel construction for maximum durability; dual inch and metric measurement bar for ease of use

Brute Platinum heavy duty high speed steel reamers enlarge and align existing holes through steel, stainless steel, tough alloys, and aluminum

1/2" Straight Shank for use in 1/2" Chuck Power Tool

Left Hand Helix/Right Hand Cut sheers chips away from operator

REMOVES BURRS: from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 3/4" inner diameter

ENLARGE & COUNTERSINK HOLES: In wood, brass, plastic and other materials with little effort

DURABLE: Compact ¾“ five-flute tool steel cutter makes fast work of deburring plastic, copper, iron pipe or sheet metal

Reamer diameter is 3/8"; Shank diameter is 3/8"; Shank length is 1-1/2"; Flute length is 2-3/4"; Overall length is 4-5/8"

5 flute; Straight shank with 3 equal flats to fit a 3/8" chuck

Left-hand spiral with right-hand cut

High Quality - Made of premium 45# Steel, it is durable, stable and high strength. And the cutting edges is sharp for expanding the hole.

Function - It is an ideal way for reaming the hole in metal sheets and plastic without effort, which is not easy to drill.

Design - With removable T-handle, it can save you the power to reaming and control.

Premium material - Made of high quality carbon steel with precision cutting edges.

Function - Suitable for taper holes on top of planks, chamfering, easy screw sinking holes. A drill bit can replace a chamfering knife.

Leverage - The reamer is equipped with a T-handle that provides extra leverage to help keep the hole round and easier to ream.

7 flutes for smooth bores

Removable handle for compact storage

Reams holes from 1/8-Inch to 5/8-Inch

Hand operated, metal tapered reamer - ideal for finishing sheet metal and aluminum and deburring panel holes

Material : High carbon steel

Hole Size : dia. 6 - 30mm

⭐【Material】The Adjustable Reamer is made of premium HSS with good hardness and toughness.

⭐【Square End】Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.

⭐【How to Adjust】Blades are adjusted by loosening one nut and tightening the other.

Straight flute reamers should be used in thru-hole applications only

Blades are adjusted by loosening one nut and tightening the other

Reamer expands to the next size

2 different sizes Available so choose as per your requirement

Low price, wide application

High quality tools for hand tapping operations

This pipe reamer is a great tool used for deburring or chamfering pipes

The design is clever, simple and practical; it can effectively remove pipe burr

Small size and light weight, easy to carry; high strength steel blade is strong and durable

【9Crsi Alloy Tool Steel Reamer】Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces. Cutting Diameter: 4mm / 0.16". Tool Flute Length: 38mm / 1.49". Overall Length: 75mm / 2.95".

【Hand Reamer】Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.

【Straight Flute Tool】Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.

ENLARGES HOLES: Help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials

LUTHIER/GUITAR TOOL: enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs

INCREASED LEVERAGE: T-handle provides leverage for easier reaming with greater control and easier turning

Enlarge Holes: The T-handle reamer can enlarge bridge pin holes, headstocks, holes for tuners and volume/tone knobs,when a drill could cause cracking in sheet metal, plastic and other materials with little effort.

Remove Burrs: From wood, cut pipe, tubing and conduit.The inside deburring edge tool with a capacity of 1/8"-1/2"(3.18mm-12.7mm).

Material: 45# Steel, hardened and tempered tool steel with precision ground cutting edges.

INNER/OUTER PIPE REAMER: This pipe reamer can fit pipes with an outside diameter capacity of 1/4 in. to 1-1/4 in. and it features 45 cutting edges on the inner and outer cones. Our inside outside reamer works on pipes, cooper, PVC, tubing, steel, metal and aluminium.

VERSATILE USAGE: Our pipe reamer is the perfect plumbing tool for professional plumbers as well as electricians, and DIY enthusiasts alike. Use it to quickly and accurately as a deburring tool to smooth out the interior and exterior of PVC, copper, aluminium, metal and steel pipes.

DURABLE DESIGN: Our conduit pipe reamer is made of hardened steel and constructed to last for years of use. It's easy-to-grip handle provides superior grip and comfort for working longer.

A set of Straight flute adjustable hand reamers, 6 flutes per reamer.

Straight Shank

Included Sizes: 15/32" to 17/32", 17/32" to 19/32", 19/32" to 21/32", 21/32" to 23/32", 23/32" to 25/32", 25/32" to 27/32", 27/32" to 15/16", 15/16" to 1-1/16", 1-1/16" to 1-3/16", 1-3/16" to 1-11/32", 1-11/32" to 1-1/2"

For use in enlarging or deburring tapered holes

Commonly used in ball joint studs and tie-rod ends

Can be used by hand or machine

Plumber's mechanic's reamer

3/8" to 2" range

High speed steel

Works Great for Any 3-degree Bridge Pin Hole Applications.

High carbon steel heat treatment, longer service life.

From wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 1/8" to 1/2" .

Made of HSS material, adjustable range.

Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc.

Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer.

The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our 1/2" reamer bit aligns and enlarges pre-drilled holes ready for bolting

Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 1/2" before using our 1/2" Bridge/Construction Reamer.

The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm.

[M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.

[Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.

[Tapered point]: allow entry into overlapping holes.

Specifications: Cutting diameter: 1/8", 3/16", 1/4", 5/16"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.

Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.

Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.

PACKAGE INCLUDES: A handle, inside and outside deburring tools, large and small primer pocket cleaners, large and small primer pocket reamers, for removing excess brass from trimmed cases.

SHARP AND ACCURATE: The angle of cut on the chamfer and deburring blades is steep and sharp enough, no need to exert excess cutting on the cases. Efficient for inside and outside deburring.

WIDE COMPATIBILITY: With the thread size of 8/32, the bits can be chucked into a drill or other automatic multi prep tool centers compatible with RCBS, Hornady, quickly removing the crimp and carbon crud.

【HIGH HARDNESS AND DURABILITY 】This machine reamer Made of high speed steel, these reamers have high hardness and durability.

【FUNCTION】 T-handle providing optimal leverage.Removable handle for compact storage.

【WILDLY USED】Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes.

High-speed Steel Tool: Good for general purpose applications, offering combination of hardness and toughness for wear resistance

Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications

Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes

The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels

The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort

Reamer T handle for easy reaming.The removable handle facilitates compact storage.

Material- The MT2 Taper Reamer is made of High Speed Steel,high hardness and durability

MT2 Taper Reamer is applicable for reaming to mould processing and handicraft processing

The MT2 Taper Reamer is Widely used for bore machining, installed in drilling machine, milling machine, etc

👍 Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, copper, softwoods and other materials.

👍 The heat treated #45 high carbon steel for longer service life.

👍 T-handle design for easy turning and sure handling.