Best Accusize Industrial Tools Hand Reamers in 2026

Ideal for reaming on stainless steel and copper tubing

45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes

Hardened steel construction for maximum durability; dual inch and metric measurement bar for ease of use

REMOVES BURRS: from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 3/4" inner diameter

ENLARGE & COUNTERSINK HOLES: In wood, brass, plastic and other materials with little effort

DURABLE: Compact ¾“ five-flute tool steel cutter makes fast work of deburring plastic, copper, iron pipe or sheet metal

High Quality - Made of premium 45# Steel, it is durable, stable and high strength. And the cutting edges is sharp for expanding the hole.

Function - It is an ideal way for reaming the hole in metal sheets and plastic without effort, which is not easy to drill.

Design - With removable T-handle, it can save you the power to reaming and control.

Premium material - Made of high quality carbon steel with precision cutting edges.

Function - Suitable for taper holes on top of planks, chamfering, easy screw sinking holes. A drill bit can replace a chamfering knife.

Leverage - The reamer is equipped with a T-handle that provides extra leverage to help keep the hole round and easier to ream.

7 flutes for smooth bores

Removable handle for compact storage

Reams holes from 1/8-Inch to 5/8-Inch

Straight flute reamers should be used in thru-hole applications only

Blades are adjusted by loosening one nut and tightening the other

Reamer expands to the next size

✅ Save Time

✅ Use to deburr metal

✅ 3 Interchangable cutters

Hand reamer

✅ [MATERIALS TYPE] Made of hardened and tempered tool steel 45#. STURDY and DURABLE.

✅ [APPLICABLE RANGE] Recommended to use for sheet metal, plastic, copper and softwoods for sure.

✅ [GUITAR & BASS] Useful and safer DIY kit for your guitar, ukulele, bass, toy model or RC airplanes.

A set of Straight flute adjustable hand reamers, 6 flutes per reamer.

Straight Shank

Included Sizes: 15/32" to 17/32", 17/32" to 19/32", 19/32" to 21/32", 21/32" to 23/32", 23/32" to 25/32", 25/32" to 27/32", 27/32" to 15/16", 15/16" to 1-1/16", 1-1/16" to 1-3/16", 1-3/16" to 1-11/32", 1-11/32" to 1-1/2"

Works Great for Any 3-degree Bridge Pin Hole Applications.

High carbon steel heat treatment, longer service life.

From wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 1/8" to 1/2" .

Made of HSS material, adjustable range.

Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc.

Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer.

[M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.

[Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.

[Tapered point]: allow entry into overlapping holes.

【HIGH HARDNESS AND DURABILITY 】This machine reamer Made of high speed steel, these reamers have high hardness and durability.

【FUNCTION】 T-handle providing optimal leverage.Removable handle for compact storage.

【WILDLY USED】Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes.

The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our 5/8" reamer bit aligns and enlarges pre-drilled holes ready for bolting.

Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer.

The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm.

👍 Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, copper, softwoods and other materials.

👍 The heat treated #45 high carbon steel for longer service life.

👍 T-handle design for easy turning and sure handling.

Handle measures 3-1/2" long

Removable handle for compact storage

Seven flutes for smooth bores

Easily make 1/8 in. to 1/2 in holes

T-handle for extra leverage

Hardened and ground steel cutting edges

For countersinking and deburring holes.

BC1651 Blade, suitable for hole diameter from 1 to 16.5mm

Continuous rotation of countersink enable very fast chamfering

Safety Collar Prevents Over-penetration And Ensures Safe Operation

30degree Left Hand Helix Shears Chips Safely Away From Operator

Deburrs Welded

【9Crsi Alloy Tool Steel Reamer】- Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.Cutting Diameter: 10mm / 0.39",Tool Flute Length: 58mm / 2.28",Overall Length: 115mm / 4.52".

【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications

【Hand Reamer】- Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Round shanks allow use with a wide variety of toolholding systems

HIGH ACCURACY - Handheld Drilling Tool with sharping cutting edge, high cutting ability, high accuracy, using in wood with little effort.

T HANDLE DESIGN - Metal reamer adopts T handle design, stable and comfortable grip, and provides extra leverage to help keep the hole round and easier to ream.

CARBON STEEL MATERIAL - Hole reamer is made of carbon steel with high hardness and good wear proof, long service life.

Adjustable Hand Reamer 7 Piece Set

HSS - HIGH SPEED STEEL

7 PIECE SET - 1/4" TO 15/32"

LONG PILOT HSS BLADE ADJUSTABLE EXPANDING HAND REAMER 1.11/32" - 1.1/2" - H14

HSS - HIGH SPEED STEEL BLADES

SOLID ONE PIECE BODY WITH PILOT

The adjustable reamer has an adjustment range of 29.5-33.5mm(1.16-1.32 inch).

The adjustable hand reamer is made of high speed steel with good hardness and toughness, good wear resistance and can be used for a long time.

The hand reamer can improve the machining precision of the hole and reduce the surface roughness.

Size of reamer: The reamer range is 15/32 to 1-1/2

High quality material: The adjustable reamer is made of high speed steel with good hardness and toughness

Characteristics of adjustable reamer set: Straight flute, straight handle

Hand reamer

Made of HSS material, adjustable.

Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc.

Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer.

The reamer range is 11.75 mm - 29.5 mm (15/32 inch to 1-5/32 inch)

Product includes 9pcs high speed adjustable hand reamers

The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness