Best Mounay in 2026

Accurate gauge block set sizes: All 2-1/2 inches long: 1/8inch, 3/16inch, 1/4inch, 3/8inch and 1/2inch square

Stack setting rods for multiple sizes or sizes or for individual use

All size measuring tools are marked with laser-engraving for quick work and measurement

This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level

High visibility reverse contrast display improves visibility in dimly lit work environments

Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces

UNMATCHED PRECISION: Each block is machined to within 0.001" accuracy. Set up gauge blocks are all 3 inches long. Accurate sizes of each individual piece (15 total): 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 15/32", 1/2", 23/32", 3/4", 1x2x3".

EASY TO READ: This setup blocks is designed with unique brighter color and white labels on three sides. Super easy to read, perfect for table saw, router and other cutters. You can stack setup bars for additional sizes you need.

STURDY & DURABLE: These solid aluminum-alloy gauge blocks with anodized finish protect router bits and saws better. The aluminum alloy makes them lighter, durable, and corrosion resistant. Laser engraved mark won’t fade with time.

The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.

Combine bars to setup 100's of measurements. Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.

Set up gauge blocks are all 3 inches long. Accurate gauge block set sizes: 1/16", 3/32", 1/8 ",5/32" ,3/16" ,7/32" ,1/4" ,5/16" ,3/8" ,7/16", 15/32", 1/2", 23/32", 3/4", 1x2x3"

Speed Up Your Woodworking Setup ... Set the height of your fence, blades, and bits in a fraction of the time. The Blockcision gauge block set comes with 16 precision setup blocks that can be combined to achieve hundreds of different measurements with ease.

Unique Ruler Markings for Quick Measurements ... You've just stumbled upon the only 16-piece setup block set with ruler markings on each bar. While other sets only mark the 123 block, we've graduated every single one to help you make measurements on the fly.

Work With Incredible Precision ... Whether you're setting up your table saw blade or router, next-level accuracy will be on your side. Blockcision bars are precise to ± 0.001” and allow you to make any measurement from 1/16” to 1” in 1/32” increments.

Multi-purpose digital angle gauge with superior 3 button functionality includes a zero feature to determine relative angles and hold feature to freeze readouts; strong magnetic base for precision measurements and cuts that make your woodworking, carpentry, construction, and other jobs much easier; easily mounts to miter saw blades table saw blades and protractor tables in addition to other metal surfaces; Set up your wood or machine shop accurately and keep it that way with almost no effort

This sturdy mini tool also functions as an inclinometer, protractor, and a level and bevel gauge giving you a variety of uses with a rotation range of 360 degrees; Large, easy to read and highly accurate LCD display with backlight automatically inverts digits 180 degrees for overhead measurements making difficult work quick and effortless; readout quickly stabilizes and the numbers won't jump around so you can work much faster

Rigorous quality control testing and worry-free portability; Strong aluminum alloy frame; Rugged carrying case provided to further protect your level box from unnecessary wear and tear and allows you to place it with the other tools in your toolbox without worrying about it getting damaged; You can easily take this highly portable and sturdy precision tool with you anywhere you need it to go without worry; This tool fits where many traditional tools won’t including your front pocket

INCLUDES: Premium Router Table Saw Push Block

FUNCTION: Perfect for ripping, table saw blade set-up and general purpose woodworking applications

ALL-IN-ONE: Tool comes equipped with front tip table saw push stick with step foot for chip and sawdust removal, a versatile table saw & router depth gauge, a square center finder, 4” hook rule, 7” rule

Accurate Quick Easy Setup of Blades Bits and Fences

15 Blocks Solid Aluminum Construction Blue Anodized to prevent damage to router bits and saws

Sizes(Inch): 1/16, 3/32, 1/8 ,5/32 ,3/16 ,7/32 ,1/4 ,5/16 ,3/8 ,7/16, 15/32, 1/2, 23/32, 3/4, 1x2x3

Size:Set up gauge blocks are all 4 inches long，respectively: 1/8", 3/16", 1/4", 3/8", and 1/2" squared. And they may be stacked for a wider range of sizes. Accuracy: ±0.002".

Premium Material:5 Blocks Solid Aluminum Construction Blue Anodized to prevent damage to router bits and saws.

Easy to Use:The setup blocks are so much easier and faster to set the height of router bits and saw blades by using gauges like these than by using rulers or other measuring tools.

Perfect heights to less than 1/64 inch accuracy consistently

1/4" Wide Steps in 1/8" Increments and is 1/4" thick for self standing

Good for most router table setups depending on router bit diameter

Displays inches with fractions or millimeters

Lays flat for fence to blade or bit positioning

Locking rule for repeat setting

The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.

The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.

The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.

2 in 1 design that allows you to set up the table saw and set the Router depth, using the same tool

Ideal for setting up blade height on table saws and Router bits depth

Made of Aluminum with laser engraved marking for ultimate clarity and long lasting durability

If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.

The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.

To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.

Self-standing durable frame with wide base feet allows the tool to be self-standing for setting the cutting depth on routers, router tables, tables saws, and more

Measure, mark and locate blades, bits, and fences

Brass thumb knob allows you to accurately tighten your measurement ruler

Hit the mark every time: With clear and easy-to-read markings, you'll be able to adjust the depth of your router bit and get precise results.

Works with any router: This depth gauge is suitable for use with all types of routers, so you can get accurate measurements no matter what type of router you have.

A must-have tool: Get the perfect depth every time with this must-have router depth gauge tool.

Premium Home Improvement Tools: This miter saw table gauge helps you make accurate and repeatable angled cuts

Versatile Woodworking Tool: Saw accessory has a brass pin that lets you make quick changes between stop angles

Accurate Measuring Tool: Miter saw guide has 5 positive stops; vernier scale aids adjustments to 1/10 of a degree

Easily set fence and cutter height with this beautiful set of five solid brass setup gauge blocks

All gage block sizes are marked with laser engraving for quick work and measurements

Accurate gauge block set sizes: All 2-1/2 inches long: 1/8", 3/16", 1/4", 3/8" and 1/2" square

【Material】: Made of anodized aluminum with a black oxide stainless steel thumbscrew,tough and durable.

【Functions】: Stair stringers and Rafter layout - Rip guide for circular saw - Framing square attachment - Using on speed square to mark repetitive angles - Using on speed square to guide saw to make angle cuts.

【Non-slip】: The large knurled thumbscrew makes it easy to grip and tighten onto any rafter square even when wearing gloves.your work piece, giving you a seriously accurate layout.

The indicator unit is affixed to a slide bar for on-the-fly adjustment

This handy device is ideal for tasks including fence alignment, table saw alignment and setting jointer depth

Provides accurate measurements on any steel machine

Fits table saws, shapers, band saws and other machines with a 3/8" x 3/4" miter slot-Real little saws may not fit-Guide Bar Length: 18-3/8"

The Deluxe Miter Gauge is accurately constructed and equipped with adjustable positive stops at 90, 15, 22.5, 30, 45, and 60, degrees left and right.

This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts 34-895/1087652, 50-864/PM-1978, and 34-928.

INCLUDES: (1) Miter Gauge for Table Saw

FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts

FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit.

2 in 1 design that allows you to set up the table saw and set the Router depth, using the same tool

Setup Router Blades: from 1/8

Made of Aluminum with laser engraved marking for ultimate clarity and long lasting durability.

Product 1: ANGLE FINDER: This adjustable precision tool is designed to capture and precisely cut difficult-to-measure gable angles in fiber cement siding and paneling from 0 – 90° degrees for fast and easy use, with lightweight aluminum construction.

Product 1: CORNER MEASURING TOOL: This scribe measures the angle between the horizontal of the ceiling wall line and the diagonal angle of the roof joists, which helps to achieve a professionally finished single cut that eliminates unnecessary unsightly gaps.

Product 1: SAW GUIDE: Our two-in-one angle gauge is designed to accommodate various cutting tools but has a specifically constructed guide slot for use with PacTools handheld shears for a straight and exact cut that matches the contour of the gable.

Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop

Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while with quick and accurate project results

High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30°and 45°and nine others, both left and right (Works in standard 3/4” x 3/8” miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8” miter slots.)

Genuine, OEM Dewalt Replacement Part

Dewalt replacement gauge, part number 5140032-78

Compatible with: DW745 Type 1, DW745 Type 2, DW745 Type 20, DW745 Type 3, DW745-B2 Type 1, DW745-B2 Type 3, DWE7480 Type 1, DWE7480 Type 20

This is an O.E.M. authorized part

Fits various Porter Cable models

OEM Part Number 514007535

Allows for manual measurements collection with caliper-level precision

Includes both metric (. 05 mm) and imperial (. 002 in. ) Vernier scale

Laser-engraved markings maximize accuracy without fading over time

Ryobi Part # 089037007707

ass'y miter gauge

Always Check Owners manual For Proper Part number

Table Saw Accessories: Saw depth gauge for router and table saw, 2 in 1 design that allows you to set up the table saw and set the router depth, using the same tool. Precisely set the height and depth of the saw blade, with extremely high accuracy and precision.

Depth Gauge: Woodworking depth gauge ruler, good for setting up blade height on table saws and router bits depth. Suitable for woodworking - solid aluminium laser marking - high precision.

Ttable Saw Push Block: Made of Aluminum with laser engraved marking for ultimate clarity and long lasting durability.Good for setting up blade height on table saws and Router bits depth