Best Mr Cartool in 2026

【Multi Functions】Tightness Test, Intake System Test, Exhaust System Test, Cooling System and Overheating Protection. Built-in air pump and smoke generator, so it does not rely on other air machine, perfect for Mobile Automotive Repair!

【Fast Smoke Output】The smoke can be produced within 10 seconds, and with stable and large amount of smoke output after switch-on (by heating up Baby Oil). Dramatically reducing diagnostic time.

【Convenient Design】Comes with a hook allows you to hang it on your hood latch, the conical adapter will fit most intakes, and the 1.5m smoke hose can help reach and connect perfectly, not harm the EVAP system.

【Wide range of uses】When you need to replace or modify the air-conditioning system or clean the air-conditioning pipes, you can use this AC cleaning tool kit to deep flush each component individually including hose, condenser and evaporator. It can not only be used for cleaning and maintenance of automobile equipment such as evaporator, fuel pipe, air conditioning pipe and condenser, but also for any other cleanable pipe such as household refrigerator and air conditioner. Note: do not flush the compressor, expansion valve, orifice tube, filter drier and accumulator.

【How it work】The air conditioning flush can use shop air to pressurize and spray specific AC flush solvent, to flush old oil, refrigerant contaminants and residue, moisture, acid and dirt. The rubber tapered tip can be sealed against pipe opening and prevent backspray of solution. If the pipe opening is smaller than the rubber tapered tip, you can try to take the tapered tip off and insert the brass spray nozzle into the pipe.

【Superior quality】The flush bottle is made of upgraded and thickened quality one-piece molding stainless steel, sturdy and anti-corrosion, the capacity is 1L. Rubber nylon resin material PVC airtight durable hose, which can withstand super high temperature and high pressure output with a length of 3.5 feet. Stainless steel liquid guide pipe, the liquid can be led out smoothly, and there will be no phenomenon that the plastic pipe is folded. The fittings which will touch the flush solvent, all adopt brass and aluminum material, ensure the AC flushing kit can be used repeatedly.

Multi-Function: X95 Automotive Replacement Instrument Panel Gauges is a smart GPS multi-functional Color HUD speedometer for driving. It supports vehicle inclination, pitch angle, longitude and latitude coordinates, satellite positioning, altitude, speed display, supply voltage, time display, driving distance, over speed alarm and etc.

GPS MODULE: X95 owns a built-in high-precision satellite positioning sensor, which can locate multiple satellite in real time according to its location and provide data such as altitude, latitude and longitude coordinates, which is very suitable for various activities such as self-driving and off-road

Color HUD Screen Display: X95 screen has been upgraded on the basis of X90 Car Inclinometer, it uses a color high-definition screen, the picture is stronger and clearer. Adjust the brightness of the screen by using the sensitivity of the light sensor which will improve visibility greatly.

【Excellent materials】The piston ring compressor tool set made of high quality manganese steel and durable iron, plier handles constructed with forged steel.

【Scope of application】Suits a large ranges of piston diameter 62-145mm/ 2.4-5.7". Specifically: 62- 65mm/2. 4-2.6", 75mm/3", 80mm/3.1", 85-86-88mm/3.3-3.4-3.5",90- 92- 95mm/3.5-3.6-37", 100-102mm/3.9-4", 105-106-108mm/4.1-4.2-4.3", 13-114-115mm/4.4-4.5-4.52", 120-123mm/4.7-4.8", 125-126mm/4.9-5", 135-137mm/5.3-5. 4", 140-142-145mm/5.5-5.6-5.7".

【Practical】Tool set for compressing piston rings for cylinder installation, fine-tooth lock allows you to compress bands in small increments, tool solutions fit almost all situations.

【Versatile】The bearing puller good for automobile/motorcycle/electric car bearings, motorcycle/automotive/bicycle wheel, pump bearing generator bearing, machine bearing, agricultural machinery etc.

【Excellent design】Pilot bearing puller adopts a three-jaw design.Three jaw design applies even pressure preventing damage to bearings, forged and heat treated steel jaws and ensure the bearing puller stability during use. Corrosion-resistant black oxide finish to make them more durable.

【Excellent materials】The bearing packer has high-quality carbon steel through forging and special heat treatment process, so that it has high hardness, good toughness, strong and durable.

【Smoke Machine T110】MR CARTOOL EVAP Leak Detector T110 is a professional machine for automotive pipe system leak detection. Can be used for EVAP System, Intake System, Exhaust System, Crankshaft System, Fuel Tank System, Turbo Leaks and Various Pipe Fittings.

【Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min.

【Flow Meter & Pressure Gauge】Equipped with pressure gauge and adjustable flow meter to help maintenance personnel to observe the current flow volume and pressure for better control the smoke effect. Built-in over-heat protection, if it exceeds working limit (Over 176℉), it will power off automatically.

DIGITAL MANIFOLD GAUGE SET: L302 refrigerant gauge kit determines low side and high side pressure, real-time test of pressure got corresponding saturation temperature which can help you more convenient for refrigeration system installation or servicing

HIGH-PRECISION: Built-in 90 refrigerants and corresponding temperatures sheet data according to the US NIST standard. When filling the refrigerant, you can observe the filling state of the refrigerant through the visible window

MULTIPLE FUNCTIONS: Refrigerant Pressure Mode, Vacuum Percentage Mode, Leak Detection Mode; With multi-unit conversion function: KPa, Bar, PSI, InHg, KgF/cm² switch, Celsius, Fahrenheit switch, can meet different needs

WIDE APPLICATION: MR CARTOOL C210 Plastic Repair Welding Machine is specially designed for auto plastic body repair. Compatible with 99% vehicles, including cars, motorcycles, boats, lawn mowers, ATVs, etc.

5-SPEED POWER: 15W~80W can be choosed according to your different needs. The max output power can reach 80W, and the temperature rises rapidly in 1-2 seconds to quickly complete the repair of automotive plastic parts.

PLUG AND PLAY: 600PCS hot staples can meet all your needs, easy to be inserted, one button to start the work, simple to operate.

BT980

Earth Ground Resistance:0/20/200/2000Ω; Earth Voltage:0～30V +/-3% + 5

DY4100 Digital Ground Resistance Tester can test earth resistance of various earth systems including power systems, electric

More complete functions, higher accuracy, more convenient and reliable for operation and more suitable for outdoor use with dust and wet proof structure.

[Accurate GPS System] Equipped with high-precision dual-channel satellite GPS signal module and built-in multi-axis gyroscope. High-precision satellites monitor your precise location in real time to avoid getting lost while driving far.

[Six Display Interfaces] Six display interfaces available to choose according to your need. Support to display Roll angle, pitch angle, time, driving speed, GPS signal, altitude, longitude, lstitude, driving direction, satellite, battery voltage, driving time, driving distance, total mileage and compass. Overspeed alarm and roll angle & pitch angle alarm available to your driving safety.

[Smart Display] Adopt HD LCD display and smart photosensitive. Automatically adjust screen brightness according to the real situation. Free rotation and built-in luminous function, promising to see clearly at night or any dark environments.

【Widely Used Adapter】Make leak testing with a smoke machine a whole lot easier! It's designed to fit even large intakes on V8 vehicles.

【How Does it Work?】Fit the cone into diagnostic site (such as the intake boot/duct or exhaust tailpipe) and inject smoke with a smoke machine to test for system leaks

【NEW LARGER SIZE!】Will fit almost all exhaust tips and intake boots. Made for larger openings with a diameter up to 4.2 inches (107mm) and as small as 1 inch (26mm)

Contains one application of oil and fuel system UV leak detection dye

For use in engine oil transmissions power steering systems and gas and diesel fuel systems

Compatible with all weights of petroleum based lubricant

【MULTIPLE TEST FUNCTIONS】The smoke machine automotive leak detector supported crankcase system test, intake system test, car sealing test, fuel tank system test, turbo leaks test, various pipe fittings test, exhaust system test, EVAP system test. (Note: Not applicable to air conditioning system piping).

【TWO-MODE】Air mode and smoke mode, the smoke detector built-in air pump and smoke generator, so it does not rely on additional air machine. Professional automobile smoke leak detection tool, using visible smoke to quickly locate the leak hole. The smoke can be produced within 30 seconds, dramatically reducing diagnostic time. Perfect for Mobile Automotive Repair!

【SPECIFICATIONS】The leak down detector built-in smoke generator with smoke output value: 0-8 L/min, power supply: 12V Vehicle battery, < 8Amp, output pressure: <1.2 Bar, heating material: mineral oil or baby oil (oil not included).

Compatible with ALL Automotive Smoke Testers

Make leak testing with a smoke machine via larger openings a whole lot easier!

Premium Durable Quality. Automotive Grade.Simply fit the cone into diagnostic site and inject smoke to test for system leaks

【MULTIPLE DETECTION FUNCTIONS】The leak detector has a variety of test functions and can do smoke testing of multiple systems, including crankcase systems, intake systems, car sealing, fuel tank systems, low pressure turbo leaks, various pipe fittings, exhaust systems, EVAP systems. Note: Not suitable for air conditioning system piping.

【QUICK DETECTION】The automobile smoke leak detector is specially designed to detect the leakage of automobile fuel and gas pipelines, heating special oil (mineral oil or baby oil) into smoke, and then pressing it into the sealed pipeline system. If there is a leak, you will find smoke.

【FLOW METER & PRESSURE GAUGE】The smoke leak detector is equipped with flow meter and pressure gauge. All data are clear at a glance, which helps you better control the smoke effect. And the EVAP Leak detection unit has an intelligent protection device with overheating.

Direct replacement - this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications

Restores functionality - reliable replacement for an original part that has clogged or failed due to emissions control system damage

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

EASY TO USE: The Smoke Machine Automotive with easy-use function and portable design, can help mechanic produce lots of smoke within 30s to detect the leaks in pipe system (by heating up baby oil). Dramatically reducing diagnostic time.

3 MAIN FUNCTIONS: Air-tightness Check, Evaporating Fuel Leakage Check, and Over-heat & Anti-frost protection. If it exceeds the working limit (Over 167°F) it will power off automatically. The evap smoke machine has its own air pump. It does not rely on other air machine and connect the detector with DC12V battery.

SUPPORTED VARIOUS SYSTEM TEST : Included EVAP System Test, Intake System Test, Exhaust System Test, Fuel Tank System Test and Car Sealing Test. (Note: Not applicable to air conditioning system piping) It can quick to find evap leaks.

【Why Need It】For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly

【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.

【Wide Testing Range】Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.

【Why Need It】For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly

【Built-in Air Pump】Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money

【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.

【Multi Functions】Tightness Test, Intake System Test, Exhaust System Test, Cooling System and Overheating Protection. Built-in air pump and smoke generator, so it does not rely on other air machine, perfect for Mobile Automotive Repair!

【Fast Smoke Output】The smoke can be produced within 10 seconds, and with stable and large amount of smoke output after switch-on (by heating up Baby Oil). Dramatically reducing diagnostic time.

【Convenient Design】Comes with a hook allows you to hang it on your hood latch, the conical adapter will fit most intakes, and the 1.5m smoke hose can help reach and connect perfectly, not harm the EVAP system.

Direct replacement - this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications

Restores functionality - reliable replacement for an original part that has clogged or failed due to emissions control system damage

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

【Excellent Quality】AUTOOL Easy Intake Adapter is made of high-quality silicone, with strong sealing, softness, high temperature resistance, good elasticity, and tear resistance.All Easy Intake Adapters have undergone multiple simulation tests，ensure can detect intake and exhaust leakage more quickly and accurately

【Fast and Convenient】AUTOOL Easy intake adapter is an inflatable block-shaped airbag with a pressurized steam channel, which is used for intake and exhaust smoke test. The wall thickness is 1.5mm and its diameter can be expanded to 121mm. It helps technicians to quickly and easily test the entire intake or exhaust system，Note: Please make sure the intake/exhaust diameter is bigger than 2".

【Humanized Design】Compared to traditional,AUTOOL Easy intake adapter with a steel ring removed at the end in order to use a smaller fitting.can be tested the intake/exhaust diameter is bigger than 2" more quickly and accurately leakage .

【EASY TO USE】The smoke machine automotive can be powered by the car’s battery, and Shop Air driven to increase duribility and ensure big smoke flow And can quickly generate smoke

【CONVENIENT TOOL FOR MECHANICS】Fuel Leak Detector designed for detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, ATV, light trucks, boats

【SPECIFICATIONS VOLTAGE】Automotive smoke machine DC 12V. Smoke output pressure:0.5PSI. Smoke output volume: ＜8LPM. Smoke current: 6 AMP.

Direct replacement - this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications

Restores functionality - reliable replacement for an original part that has clogged or failed due to emissions control system damage

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

🚗【Diagnose All Types of Leaks】🚗The SM603 smoke machine automotive can help you detect accurately the leakage of EVAP system, intake/exhaust system, vacuum leaks, sealing test, fuel tank system, turbo, crankcase system, various pipe fittings , Throttle Shafts, Door&Windows seals, Oil Leaks and more! It can output the smoke within seconds, improve the efficiency of diagnose dramatically.

🚗【Advanced and Safe】🚗The Romondes SM603 evap smoke machine with thick smoke output detects even the smallest leaks. It is safe and reliable as there is no need to start the vehicle during use. Moreover, when this smoke leak detector can be smart power off, the power will be automatically shut off when it exceeds the 75 ℃ housing limit.

🚗【Flow meter】🚗SM603 automotive smoke machine provides a quick visual indication of the amount of smoke passing through the system being tested. Adjustable flow meter helps you control the amount of smoke easily and also used to lock out the system under test and observe any pressure decay on the pressure gauge.

▶ Convenient Automotive Tool - RTRHINOTUNING Smoke Leak Detector is a professional auto pipe leak detect tool. Designed for detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats, You will quickly find the leak point in pipe via the smoke. One of the best tools you will ever own! If it leaks a smoke machine will find it.

▶ Working Type - The leak tester will turn smoke oil (USP Mineral Oil / Baby Oil) into smoke, then blow smoke into pipe system, you will find leak point in pipe via the smoke. In brief, our smoke detector can quickly make constant smoke to find leak. The vacuum smoke machine has its own Air Pump without relying on other machines. Simply connect the detector with the DC12V battery, it can output thick smoke within 20s after turning on.

▶ Application - Crankcase System Test, Intake System Test, Exhaust Systems Test, Fuel Tank System Test, Turbo System Test, Cooling System Test, Various Pipe Fittings Test. The Car Pipe leak Detector ​can be also be used to find other leaks, oil leaks, wind water and weatherstripping leaks; tractor & car cabs, EGR and exhaust systems, the list goes on.

Direct replacement - this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications

Restores functionality - reliable replacement for an original part that has clogged or failed due to emissions control system damage

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Direct replacement - this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications

Restores functionality - reliable replacement for an original part that has clogged or failed due to emissions control system damage

Durable construction - this part is made from quality materials to ensure reliable performance and long service life