Best Myers Tire Supply in 2026

VERSATILE- Handles a wide variety of springs including Jeep Cherokee Trailhawk, RAV4, F150, GM pickups and SUVs, Chrysler Minivans and Chevy Camaros without needing additional adaptors

ADJUSTABLE- Works on spring diameters from 3.5" to 11.5", maximum spring compression capacity 3,000 lbs.

EFFICIENT- Multi-position upper spring hooks for flexibility to fit "Factory" coil spring configurations

VERSATILE- Handles a wide variety of springs including Jeep Cherokee Trailhawk, RAV4, F150, GM pickups and SUVs, Chrysler Minivans and Chevy Camaros without needing additional adaptors

ADJUSTABLE- Works on spring diameters from 3.5" to 11.5", maximum spring compression capacity 3,000 lbs.

PORTABLE- Included wheeled cart for easy movement around the shop

Check pressure, inflate and deflate without removing the cap

Replaces standard cap

For use on passenger vehicles and light trucks

Dual pump pistons raise the saddle to maximum height in 5 pump strokes

Thick frame plates and reinforced lift arm for added strength

Angular positioned pump pistons provide maximum pump stroke when jack is under the vehicle

3.4" low height with a high height of 21.4"

Low profile robust frame provides access under low ground clearance vehicles

Dual pump pistons reaches maximum height quickly

Sturdy stamped Steel Construction with 6 ton capacity

Double locks mechanism with both handle locks and mobility pin

Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin

2.75” ultra-low height with a high height of 24”

Extremely low profile frame provides access under low ground clearance vehicles

Dual pump pistons reaches maximum height quickly

Installing a ball joint on a lower control arm typically requires the effort of two people

With this tool and our 7420 or 7421 pry bar or any 7/8" diameter pry bar it's a one-person job

Fully adjustable air springs to level your vehicle when towing or hauling a heavy load for a safe comfortable ride

Up to 5,000 pounds of load leveling capability

Easy to install with included detailed instructions

Perfect brake tool for caliper work: Our brake caliper hook is the perfect tool to hold brake calipers out of the way, reducing the possibility of damage to calipers, brake hoses and other parts.Use of dedicated repair tool makes the automotive work quicker and save your time for added productivity.

Durable and safe: our brake caliper hangers are made of durable steel, with sturdy construction, not easy to break, can withstand a weight rating of approximately 100 pounds, safe and durable for you to use. 4 per set, and 8 extra rubber tips.

With rubber tips: our brake caliper hangers are designed with rubber tips at both ends, which can help to prevent the scratching of your painted suspension components.

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.Material:Rubber Bushings

STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris

This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup

Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut

threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools

Gets The Job Done Right - Our 2 pack Lower Control Arm Prying Tool is a specialty made pry bar to pry down the lower control arm to separate the lower ball joint.

Turns A Two Man Job Into A One Man Job - Installing wheel bearings, front axles and CV Joints used to require two people but now only requires one with this tool.

Works For Most Front-Wheel Drive Vehicles - Applicable for most front-wheel drive vehicles, import cars, domestic vehicles, and minivans.

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life

STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.Material:Rubber Bushings

STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants

1. ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.

2. HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.

3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.Material:Rubber Bushings

STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants

VERSATILE USE: Orion Motor Tech's 5-piece pickle fork tool set features five fork open sizes: 3/4", 1", 1 1/3", 1.45", and 1 2/3", easily removing standard sizes of ball joints, tie rods, and pitman arms from a vast range of cars and trucks

HEAT-TREATED AND GALVANIZED: The AISI 1045 medium carbon steel used in these premium tie rod removers has been heat treated for greater strength and durability and their zinc coating protects them from corrosion, extending their service life

SOLID CONSTRUCTION: The single-piece solid construction of our ball joint separators ensures their high strength, durability, and longevity

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life

STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life

STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

Hook Spanner Wrench Set – For DIY car enthusiasts and professional mechanics our coilover spanner wrench set supports most coilover shock replacements.

Slip-Resistant Grip – Far easier to grab than standard spanner wrenches these boast a rubberized grip to reduce hand tension and give you more control over projects.

Powder-Coated Steel – This shock spanner wrench set is made with rust-resistant, high-quality steel to give it ideal strength, balance, and flex for heavy pulls or turns.

EASY TO USE: Use the ABN 11.5” Inch Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life

LOCKS INTO PLACE: Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools

WIDE RANGE OF COMPATIBILITY: Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11.5-inch threaded rods for 10-inch to 10.5-inch maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life

STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants

WHY YOU NEED IT: Safely and easily compress coil springs with our Macpherson Strut Spring Compressor! Use it to replace shock absorbers, spring sets, repair bent struts and damaged spindles. It's as simple as attaching the brackets completely onto the spring, tightening down the tool and then removing the strut. Make sure to lubricate the threads with anti-seize compound to extend the lifetime of the tool. The set includes a high quality storage case to store your tools when they're not in use!

DESIGN CONSIDERATIONS: Features a Heavy Duty V-threaded rod that allows for fast and precise movement with a large surface area for broad spring contact. The built-in detent pins lock the coil spring in place for safe and easy spring compression. The V-threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools. The jaws are constructed from drop forged steel with a hardened center screw for maximum strength and longevity.

APPLICATIONS: This Macpherson Strut Spring Compressor has a universal design that allows it to work with all vehicles equipped with Macpherson struts. The V-thread center screw is 5/8 inches by 11 inches long, allows for precise movement and will stay locked in place until rotational force is applied.

Professional Multi Use MacPherson Interchangeable Fork Spring Compressor Set

Compresses all types of MacPherson style coil springs front and rear.

Includes three sets of jaws: 2 each of, 65-125mm, 88-160mm and 126-212mm

Fully adjustable air springs to level your vehicle when towing or hauling a heavy load for a safe comfortable ride

Up to 5,000 pounds of load leveling capability

Easy to install with included detailed instructions

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life

STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life

STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength

ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear