Best Rhfgyy in 2026

RCMT10T3MO (R5) Round milling inserts: made of solid carbide with mutilayer coated, high finish and high wear resistance;

Tool Holder is Black Oxidized Smooth Surface and Tool Hardness (HRC 50 degrees up and down) and Precision Are Up To The First Grade;

Type:Right hand ,Screw compression type;

Size:MGMN150/200/250/300/400

Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

LIKE BLOTTING PAPERS, BUT BETTER: This face roller is made of real volcanic stone, which soaks up excess oil instantly. It’s our secret for fresh, shine-free skin any time. Use it on a clean or finished face—it won’t mess up your makeup

MASSAGES AND MATTIFIES FACE: Rolling the stone roller across your skin feels heavenly, like a mini facial massage. Ditch your jade roller and use our 2-in-1 Mattifying face roller for oily and acne prone skin

EASY TO USE: Gently roll the face roller ball over your T-zone or anywhere skin is shiny. That’s it

Carbide Indexable End mills, 3/4'' straight shank, 2''

Comes with inserts installed

Uses standard triangular inserts

BOOST YOUR CONFIDENCE WITH BLEMISH-FREE, YOUNG-LOOKING SKIN: Let our oil-balancing face primer be the solution you are looking for. Go all-natural with the intensive healing power of our herbal moisturizer for a younger and healthier skin appearance.

GLOW BEAUTIFULLY WITH THE MATTE PRIMER YOU DESERVE without drying your skin. Oily skin causes major acne breakouts, but you need to control oil without over drying the skin. Our primer provides the optimal hydration as it controls sebum production.

3-IN-1 SOLUTION: MOISTURIZER, MATTIFIER AND PORE MINIMIZER. Save money and reduce the need for multiple facial products. Use this moisturizer under your foundation and enjoy oil-free skin all day. Who wouldn't love shine control skin care products?

REMOVE BLACKHEADS, WHITEHEADS AND DARK SPOTS: This effective alternative to a blackhead pull off mask dissolves your dark spots and minimizes pores; no more waiting 20 minutes for harmful chemicals in black masks or invasive comedone extractor tools; deep pore facial cleanser

DEEP PORE CLEANSER - UNCLOGS AND REDUCES PORES: Forget the painful blackhead vacuum; this pore cleanser gel contains a combination of exfoliating AHA and BHA acids such as lactic and salicylic acids that unclog pores, deep cleanse and reduce enlarged pores; For men, women and teens; not for sensitive skin.

LACTIC ACID BASED FORMULA: Beauty and skin care professionals use our blackhead treatment for stubborn blackheads on patients with combination skin, oily skin and acne prone skin effectively and safely; this gentle gel is also used as a whitehead remover.

TPCN32PDTR（TPCN1603PDTR） Indexable Carbide Milling Insert 1/8" Thick,11 degree relief angle.

Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance

For turning and milling carbon and alloy steels, tools steel and stainless steel

🎄 MGMN200 Inserts Material: Made of solid carbide with tin coated,suitable for steel and stainless steel parts processing.

🎄 Coating: CVD , MGMN 200 Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, High finish and High wear resistance.

🎄 Feature of Inserts: MGIVR offers long tool life and faster cutting speed, low friction coefficient. Good versatility with high precision, high finish and high wear resistance. Not easy to stick to the holders or workpieces. Vacuum hardening, exquisite craftsmanship, easy cutting.

Carbide Indexable End mills, R8 shank, 3"Cutting Diameter,Overall Length: 6"

Positive rake 90°,right hand cut

Reduces cutting forces,Maximum rigidity

Digitally printed washed polyester crepe de chine with plein-air floral drawings with bleach effect

Black bias neck finishing detail

Wrap around neck yoke

It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal.

Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting.

The Turning Is Light And Fast, And The Advanced Coating Process Is Sprayed By The 1000-Degree Stress Accumulation Method, The Coating Is Thicker, And The Cutting Edge Is Passivated, Strong And Durable.

1. Groove Designed For Steel Materials To Effectively Provide Efficiency.

2. Use High-Quality Hard Alloy Casting, Sharp And Wear-Resistant.

3. Reasonable Mechanical Design And Shape, Not Easy To Collapse, Delaying Practical Life.

1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar

Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders

Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action

Insert: Grooving Insert MGMN300,External Threading Inserts 16ER A60 ,Turning Insert WC32.51（WCMT06T304),CC32.51 (CCMT09T304), DC32.51(DCMT11T304)

Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

Size:Turning Inserts MGMN200 6mm x 3mm x 2mm

Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32".

Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut

Designed for cast iron and non-ferrous materials,good for both finishing and roughing

It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal.

Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting.

The Turning Is Light And Fast, And The Advanced Coating Process Is Sprayed By The 1000-Degree Stress Accumulation Method, The Coating Is Thicker, And The Cutting Edge Is Passivated, Strong And Durable.

Tool Holder: Made of High-Quality Alloy Steel 40CR, Using Free Forging Process, with Higher Mechanical Properties. Prompt Work Efficiency.

Blade: High-Quality Hard Alloy with Good Wear-Resistant Coating, Smooth Cutting Geometry, Effectively Improve the Life of The Tool.

High Temperature Heat Treatment Process, High Temperature Tempering, Greatly Improve The Strength, Hardness, Fatigue Resistance and Toughness of The Tool Holder, and The Surface is Bright.

RCMT10T3MO (R5) Round milling inserts: made of solid carbide with mutilayer coated, high finish and high wear resistance;

Tool Holder is Black Oxidized Smooth Surface and Tool Hardness (HRC 50 degrees up and down) and Precision Are Up To The First Grade;

Type:Right hand ,Screw compression type;

Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder.

CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting.

Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing.

About the holders:Material: 40Cr-42CrMo , HRC42-46 , imported steel .shank dia: 5/8"

About the MGMN200 (slivery): cutting width:2mm, design for Aluminum

About the MGMN200 (yellow):cutting width:2mm, design for stainless steel and steel

MGMN300 Thickness: 3.00 mm( 0.118"); Corner Radius: 0.4mm

Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

<p>Black colors PVD coating, good for working steel, stainless steel, cast iron. </p>

<p>Size, Width(B): 3.1mm, Radius(R): 0.2mm, Longth(L): 11.3mm, fit for Korloy grooving holder.</p>

<p>General chipbreaker for semi-finishing working, with better chip breaker, good material and more efficiency</p>

Size, MRMN300-M, Width(B): 3mm, Radius(R): 1.5mm, Longth(L): 21mm, Thickness(S): 4.8mm.

CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting.

Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing.

【Application】- Precision Grooving and Profile Turning Tools

【Size】- Shank: 20mm, Groove Width: 1.5mm

【Inserts】-MGMN150,MGGN150

Grey colors PVD coating, use for a variety of stainless steel finishing and semi-finishing at medium to low cutting speed.

Size, Width(B): 3mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 2.35mm, Thickness(S): 4.8mm, fit for Korloy grooving holder.

When need excellent edge strength and high surface quality, provide the perfect smooth cutting.

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC and conventional machines. Toolholder includes: C Clamp, S3808 Screw, W1005 Wrench and P0312 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin.

This toolholder is compatible with grooving, face grooving, threading and parting inserts.

Size:APKT1003, Width(I.W): 0.2598 in, Longth(L): 0.41 in, Radius(R): 0.0157 in, Thickness(S): 0.093in, Dimension(Φd): 0.11in

PVD Coating grey color, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge.

Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing.