Best Face Grooving Inserts in 2026

🎄 MGMN200 Inserts Material: Made of solid carbide with tin coated,suitable for steel and stainless steel parts processing.

🎄 Coating: CVD , MGMN 200 Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, High finish and High wear resistance.

🎄 Feature of Inserts: MGIVR offers long tool life and faster cutting speed, low friction coefficient. Good versatility with high precision, high finish and high wear resistance. Not easy to stick to the holders or workpieces. Vacuum hardening, exquisite craftsmanship, easy cutting.

Size:Turning Inserts MGMN200 6mm x 3mm x 2mm

Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal.

Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting.

The Turning Is Light And Fast, And The Advanced Coating Process Is Sprayed By The 1000-Degree Stress Accumulation Method, The Coating Is Thicker, And The Cutting Edge Is Passivated, Strong And Durable.

RCMT10T3MO (R5) Round milling inserts: made of solid carbide with mutilayer coated, high finish and high wear resistance;

Tool Holder is Black Oxidized Smooth Surface and Tool Hardness (HRC 50 degrees up and down) and Precision Are Up To The First Grade;

Type:Right hand ,Screw compression type;

Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder.

CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting.

Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing.

About the holders:Material: 40Cr-42CrMo , HRC42-46 , imported steel .shank dia: 5/8"

About the MGMN200 (slivery): cutting width:2mm, design for Aluminum

About the MGMN200 (yellow):cutting width:2mm, design for stainless steel and steel

MGMN300 Thickness: 3.00 mm( 0.118"); Corner Radius: 0.4mm

Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

Size: Pitch: 0.5-1.5mm, TPI: 48-16, Dimension(Φd)：6.35mm, Length(L): 11mm, Radius(X)：0.8mm, (F): 0.9mm

Can be used for machining carbon steel, tool steel, Aluminum alloy, Copper alloy and stainless steel.

General material for threading processing, a nanocomposite coating of a AITiSi base, high temperature stability.

<p>Black colors PVD coating, good for working steel, stainless steel, cast iron. </p>

<p>Size, Width(B): 3.1mm, Radius(R): 0.2mm, Longth(L): 11.3mm, fit for Korloy grooving holder.</p>

<p>General chipbreaker for semi-finishing working, with better chip breaker, good material and more efficiency</p>

Size, MRMN300-M, Width(B): 3mm, Radius(R): 1.5mm, Longth(L): 21mm, Thickness(S): 4.8mm.

CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting.

Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing.

【Application】- Precision Grooving and Profile Turning Tools

【Size】- Shank: 20mm, Groove Width: 1.5mm

【Inserts】-MGMN150,MGGN150

Grey colors PVD coating, use for a variety of stainless steel finishing and semi-finishing at medium to low cutting speed.

Size, Width(B): 3mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 2.35mm, Thickness(S): 4.8mm, fit for Korloy grooving holder.

When need excellent edge strength and high surface quality, provide the perfect smooth cutting.

【Application】- Precision Grooving and Profile Turning Tools with Round End

【Size】- Shank: 16mm, Groove Width: 2mm T: 20mm-140mm

【Inserts】-MGMN200,MGGN200

【Application】-Internal Grooving/Boringg Tools

【Size】- Shank: 16mm, Groove Width: 2mm

【Inserts】-MGMN200,MGGN200

Designed for generating square grooves in the face of the part

Polished split face for improved edge retention and chip evacuation while reducing galling

Split geometry makes the tool as rigid as possible

60 degree negative rake, neutral insert

Grade C5 /TIC-65 coated insert which is the same as the Kennametal KC810, KC850, KC950, KC730 grades

Completely interchangeable with the Kennametal TopNotch and the Teledyne Firth Notch systems

Size, MGMN300-M, Width(B): 3mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 1.2mm, Thickness(S): 4.8mm.

CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting.

Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing.

Designed for generating square grooves in the face of the part

Polished split face for improved edge retention and chip evacuation while reducing galling

Split geometry makes the tool as rigid as possible

Yellow colors CVD coating, use for a variety of steel and cast iron continuous and interrupted cutting finishing to roughing.

Size, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, (D): 3.3mm, (S): 4.8mm, fit for Korloy grooving holder.

When need excellent edge strength and high surface quality, provide the perfect smooth cutting.

Size:MGMN150/200/250/300/400

Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

For shallow precision grooving and profile/copy turning

O-ring. snap-ring, relief grooving and high production

Opening of wide grooves by plunging and side turning

Designed for generating square grooves in the face of the part

Polished split face for improved edge retention and chip evacuation while reducing galling

Split geometry makes the tool as rigid as possible

Model: MGIVR2016-2 MGMN200-G

About holders:made of High-Quality Alloy Steel 40CR, Using Free Forging Process, with Higher Mechanical Properties. Prompt Work Efficiency.

Coated:CVD MT-TiCN+Tic+Al2O3

Pack of 1

Insert Thickness (S) 0.195″

Application | Int. & Ext. Grooving Flo Lock |

Width 0.098 inches MB-Face Grooving Grade GC1025 for All materials

Insert Style MB Size 09 Screw In Mounting

Right Hand Cutting Direction; No of Edges: 1; Pack Size: 10

Designed for generating square grooves in the face of the part

Polished split face for improved edge retention and chip evacuation while reducing galling

Split geometry makes the tool as rigid as possible

Use with Large series toolholders.

Use with Kyocera SIGE-style grooving holder

Insert Size: 500

Made of Carbide