Best Sandvik Coromant in 2026

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")

Round shanks allow use with a wide variety of toolholding systems

CoroCut 1-2 1.000" Square Shank External Machining - Shank Tools

External Machining - Shank Tools

Square Shank Parting and Grooving Holder CoroCut Tool Holder

Negative basic shape inserts for high performance turning

CoroTurn RC is a top and hole clamping system and the first choice when stability and security for productive turning of large components. The system is mainly used for external turning, roughing to finishing, but also for internal turning when chip evacuation is good.

Productive solution with wiper and Xcel technologies

Width 0.098 inches MB-Face Grooving Grade GC1025 for All materials

Insert Style MB Size 09 Screw In Mounting

Right Hand Cutting Direction; No of Edges: 1; Pack Size: 10

Width 0.079 inches CM Cut Off Medium Feed Grade GC2135 for Stainless, Steel, Aerospace

Insert Style N123E2 Size E V or Rail Clamp with Screw

Neutral Cutting Direction No of Edges 2 Pack Size 10

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length

SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet

PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity

Diameter: 5/8", Shank Diameter: 5/8", Flute length: 1-5/8", Overall Length: 3-1/4"

4 Flute, Standard Tooth

M42-8% Premium cobalt, TiAlN Coated

HIGH PERFORMANCE - Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency

STRONG EDGES - Prevents chipping at corners; Flutes ground in a world-class ISO-9001 Factory

MATCHED COATING AND CARBIDE MATERIAL - Highly optimized carbide and coating pairing means superior wear and chipping resistance in your cutting applications

✅ APPLICATION - Our carbide tools are highly effective for working with Titanium, Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.

✅ HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.

✅ DISTINCTIVE DESIGN - Our product delivers high performance, firm edges, anti-vibration, less chatter, reduced burring, and stable machining of difficult-to-cut materials.

Carbide Indexable End mills, 3/4'' straight shank, 2''

Comes with inserts installed

Uses standard triangular inserts

✅ APPLICATION -These cutters are ideal for machining Aluminum and Copper Alloys due to their U-shaped design and high feed rate.

✅ HIGH-PERFORMANCE MATERIAL - The exceptional Material Removal Rate (MRR) enables faster cutting, particularly when slotting.

✅ DISTINCTIVE TOOTH DESIGN: Double relief angles create excellent productivity, while the design optimized for alloys effectively enhances surface smoothness.

Product Name : End Mill;Material : HSS

Color : Gray;Cutting Diameter : 12.7mm/1/2"

Cutting Depth : 35mm/1.4";Shank Diameter : 12.7mm/1/2"

Package Included: 5pcs 1/2" carbide square end Mill

Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.

Package Included: 1pc 1/2 " carbide square end Mill.

Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

✅ APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~50), and Cast Iron.

✅ AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.

✅ HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.

4 Flute,Cutting diameter=5/16'',Shank diameter=5/16'',Flutes length=1-5/8'',Overall Length=3-1/2''.

Material:M2AI,High Speed Steel,long tool life.Extra long blade for deep cavity machining.

Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc(under HRC32(HRA66)).

Contains 7Pcs square endmills:1/8''+5/32''+3/16''+1/4''+5/16''+3/8''+1/2'' Blade Diameter

Material:M2AI,High Speed Steel,long tool life.

Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc

H.S.S.

Straight Shank

Metric Size: 3, 4, 5, 6, 8, 10, 12, 14, 18 & 20mm, 2F+4F

90° Cutting angle. Cutting Diameter D: 1/2". Shank d1: 5/8"

OAL: 3-1/4". ap: 0.433". No of Insert: 1. Screw: M2.5 x 6.

Insert: APKT11T3

Diameter: 1''; Shank Diameter: 1''; Flute length: 3''; Overall Length: 5-1/2''; 5 Flute, Fine Tooth

TiAlN coated; Center cutting; M42-8% Premium cobalt; Flutes ground by a world-class IS-9002 Factory; CNC Qualified

Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots; Used for aggressive machining

TiAlN coating. Center cutting. M42-8% Premium cobalt. Flutes ground by a world-class IS-9002 Factory.

Diameter: 1/2''. Shank Diameter: 1/2''. Flute length: 2''. Overall Length: 4''

4 Flute, Fine Tooth. Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.

1.Four flutes produce a better finish than fewer flutes.

2.Material: HSS ; Imperial Units, not Metric .

3.One Set of end mill bits Including: 6 Different kinds of Inch Size:1/8",1/4",3/16",5/16",3/8",1/2" end mills to meet your need,

【HEAVY DUTY & SOLID CONSTRUCTION】Made of ultra-fine grain carbide, ensuring high work efficiency with good milling, cutting performance.

【HIGH EFFICIENCY】These Engraving bits have sufficient flexural strength and high abrasion resistance, obtain accuracy and fine finish With sharp edge, which is able for fast engraving that makes high efficiency.

【SIZE】Cutting Diameter:1/8''; Cutting Depth:12mm/4.72in; Shank Diameter:1/4''.

90Degree Cutting angle. Screw down insert. Radial rake angle: -10Degree. Axial rake angle: +7Degree

All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.

Fitted with 10Degree positive rectangular insert allow the high depth of cut and feed per tooth. Uses APKT / APHW / APKR_APht / APMT insert (sold separately)

TiAlN coating; Center cutting; Flutes ground by a world-class IS-9002 Factory, CNC Qualified

Diameter: 3/4''

Shank Diameter: 3/4''

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency.

APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.

CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.