Best Shause in 2026

Size: The laboratory glass condenser has a standard frosted joint. It is equipped with two serrated nozzles and a solid drip tube at the bottom.

Material: It is made of borosilicate glass, which is resistant to high temperature, acid and alkali, has thermal stability, chemical stability, durable, transparent and clean, and can be reused.

Advantages: even wall thickness, no bubbles or scratches, fine grinding, high sealing, four small nozzle joints, sharp edges and corners, fine grinding without leakage.

Size: There is a standard taper connector on the top, and two glass hose connectors connect the inner pipe through which the coolant flows.

Material: made of borosilicate glass, resistant to high temperature, acid and alkali, durable, transparent, clean and reusable.

Advantages: Its inner core tube is spiral, which increases the length of glass tube and has a larger cooling surface. As the inner core tube is serpentine, more distillate is accumulated during distillation, so it is suitable for vertical continuous distillation or reflux device.

Size: There is a standard tapered connector on the top, and two glass hose connectors connect the inner pipe through which the coolant flows, the lower hose for the coolant inlet, and the upper hose for the coolant outlet.

Material: made of borosilicate glass, resistant to high temperature, acid and alkali, durable, transparent, clean, durable and reusable.

Widely used: It is usually used in equipment and can be placed in vertical and inclined positions as reflux condenser and condenser. It can be placed in vertical and inclined position as reflux condenser and condenser.

High Quality - Glass Condenser is made of high quality glass, which is clear and easy to wash.

Specification - Annealing point is 575℃, softening temperature is 820℃, jacket length is 200mm

Joint – It has the standard 24/40 joint.

Joint – It has the standard 24/40 joint.

Specification - Annealing point is 575℃, softening temperature is 820℃, jacket length is 300mm

High Quality - Glass Condenser is made of high quality glass, which is clear and easy to wash.

Graham condenser is used for distillation and reflux apparatus, working with distillation flasks and bent adapters to condense vapors and liquid droplets

Glass Graham condenser; 24/40 joint on the top and bottom

Made of high quality glass

Graham condenser is used for distillation and reflux apparatus, working with distillation flasks and bent adapters to condense vapors and liquid droplets

Glass Graham condenser; 24/40 joint on the top and bottom

Made of high quality glass

Graham condenser is used for distillation and reflux apparatus, working with distillation flasks and bent adapters to condense vapors and liquid droplets

Glass Graham condenser; 24/40 joint on the top and bottom

Made of high quality glass

Graham condenser is used for distillation and reflux apparatus, working with distillation flasks and bent adapters to condense vapors and liquid droplets

Glass Graham condenser; 24/40 joint on the top and bottom

Made of high quality glass

Still Spirits Turbo 500 Stainless Steel Condenser

Stainless steel body

Electronic Temperature Display

SIMPLE DESIGN EASY SETUP----The liebig condenser is the most basic water-cooled condenser,also named “water condenser”,which consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket to condensate the vapor in the inner tube,having a better cooling performance than air condenser.

COMMONLY USED ----A liebig condenser commonly used in a apparatus,also in reflux process and soxhlet extraction can be placed in vertical and oblique position as a reflux condenser and a condenser.As jointed glassware part,it is usually used with a round bottom flask,a three way adapter,a take off adapter to assemble a or reflux setup.

DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm

HIGH EFFICIENCY In a soxhlet extraction,the sample material contained in the soxhlet thimble can be extracted multiple time automatically with a small solvent dosage in high efficiency.Comparing to the steam ,solvent extraction happpens at a lower temperature which will dissociation of the compounds in the extracts from plants sensitive to temperature.

DIMENSIONS---The glass Soxhlet extractor set with 55/50 upper and 24/40 lower joint including an allihn reflux condenser with a water cooled inner drip joint at bottom ,the jacket length is 300mm,Overall height is 405mm,the joint is 55/50; A soxhlet extractor tube, with 55/50 upper joint and 24/40 lower joint.;An all- glass soxhlet thimble with sealed in fritted disc for which the pore diameter is from is from 20 to 35 μm.

WIDELY USED :Soxhlet extraction, also known as fat extraction,continuous extraction , is a laboratory apparatus for extracting compounds from solid material. Soxhlet extractors are often used for the determination of crude fat content.,Which is determined by extracting the fat from the sample using a solvent.It also can be used to extract essential oils from plant material by food grade solvents

DESIGN----This is a two-piece design vacuum cold trap,the connections on the uppper parts are with serrated hose connection,The center tube with 10mm hose connections for easy connection to a vacuum gas manifold bank tubes which are also with 10mm hose connections.The serration hose connection on the side tube have an O.D.of 13mm at the smallest serration and 16mm at the largest serration. The lower part is a thick wall round bottom tube with standard taper outer joint.

USE----It is used to place between the experimental apparatus and the vacuum source. In a schlenk line,the vacuum trap is usually connected to the vacuum bank of the vacuum gas manifold

DIMENSIONS-----This vacuum trap has 24/40 joints to assemble the two parts together, The O.D of the outer body is 30mm,the outer body below the joint is 200mm,the O.D.of the inner and side tube is 10mm.

Glass Graham condenser

24/40 Joint on the top and bottom

Made of Borosilicate Glass

Glass Graham condenser

24/40 Joint on the top and bottom

Made of Borosilicate Glass

A graham condenser consists of an inner spiral surrounded by an outer jacket tube

Graham condenser also called Inland Revenue condenser. It is very similar to the coiled condenser

This Graham condenser is designed with 24/40 standard taper joints at top and bottom to fit the flask and other lab jointed glassware apparatus,with 10mm glass hose connections and a jacket length of 300mm

SPECIFICATION - Graham condenser is designed with 24/40 standard taper joints at top and bottom, 300mm/11.81 inch in jacket length, with 10mm/0.4 inch glass hose connections

PREMIUM MATERIAL - Made of borosilicate glass, smooth surface and corrosion resistance, complete product packaging

HEAVY DUTY DESIGN - Graham condenser reusable, ground glass joints allow precision connection to jointed glassware

Made From G3.3 Borosilicate Glass

Annealing Point ------560℃

Linear Coefficient of Expansion------ 32×10-7/℃

Extraction apparatus consists of an extraction tube, a special bulb-type condenser, and a flask.

All equipped with [ST] joints. Condenser tubulation O.D. is 10mm.

Extraction tubes equipped with ground joints at top and bottom.

29/42 Inner Joint

200mm Length Below Joint

Condenser has an inner joint

Lab Glass Condenser This condenser pipe is perfect for home education, chemistry lesson and laboratory use.

Glass Graham Condenser It can improve kids imagination and hands-on ability through interactive play.

Laboratory Glass Condenser This experiment equipment can be a practical and helpful way to introduce kids to operate the experimental equipments and have the experiments.

The Dimroth condenser used as reflux condenser is more effective than liebig condenser, allihn condenser,graham condenser,coiled condenser.It provides larger cooling surface than the coiled condenser.Comparing to the graham-style condenser(liebig,allihn,graham),the Dirmroth condenser is Excellent for use with high vapor pressure solvents

An assembly of a reflux apparatus usually includes a Dimroth condenser,a round bottom flask,a drying tube,a separtory funnel or equalizing pressure funnel.If the flask is single-neck,a claisen adapter should be applied to provide an extra entry.If the flask is three-neck,the middle neck can be fitted a PTFE stirring shaft for better heating performance.

The coil style Dimroth condenser designed with tightly wrapped coil,jacket with an O.D.of 40mm while coil with an O.D.of 8mm , providing larger cooling surface than HMC010603.It has a 24/40 top outer standard taper joint and lower inner drip tip joint.Hose connections have O.D.of 8mm or 10mm at the largest serration.The coil length is 175mm,overall height is 350mm

Reflux Coiled Condenser

125mm In Coil Length

With 24/40 Joints

24/40 joints top and bottom; 8 mm hose connections

Coil length: 100 mm; overall length: 245 mm

More efficient because of more cooling surface

Sold in each

Package Weight : 0.431 kilograms

Borosilicate glass

Feature a large opening at the top for easy use of dry ice, acetone, alcohol mixtures, or liquid nitrogen

Borosilicate glass; heavy duty design; reusable and high quality

24/40 joint bottom

Jacket Length: 200mm/7.874inches, a small size coil type Graham Condenser and the Annealing point is 575℃, softening temperature is 820℃.

Joint size is 24/40 on top and bottom with 10mm glass hose connections, Don't get this one wrong for your attachments.

Perfect taper joint for lovely attachment fitting experience (Satisfying sound while attaching the joint sssskk)

Graham Condenser

Socket size 29/32

Cone size 29/32

This experiment equipment can be a practical and helpful way to introduce kids to operate the experimental equipments and have the experiments. lab glass condenser

This condenser pipe is perfect for home education, chemistry lesson and laboratory use. lab condenser

It can improve kids imagination and hands- on ability through interactive play. lab condenser pipe