Best Slnihams in 2026

The 10.5 inch sheet metal crimper made from precision forged alloy steelused for crimping heavy or thin metal sheet 22-28 gauge galvanized or stainless steel ductwork.

Our hvac duct crimper 5-Blade design can make the perfect connection in ductwork sheetmetal, downspout, guttering, metal pipe, gutter round duct and stove pipe. Deep throat allows for variations in crimp depth allows you to quickly and accurately crimp sheet metal pipe to your will.

Our hand crimpers HVAC tools TPR material handle with non-slip ergonomic grip for comfort and ease of control. And the gutter tools metal downspout crimper includes an integrated lanyard tether hole for working at heights.

[Complete Crimp Tool Kit] – Every order comes with a crimping tool and 1200 insulated wiring terminals to support small DIY projects and large electrical repairs.

[Crimping Tool Peculiarity] – Durable and compact structure,for insulated and uninsulated connectors, the crimping area is 0.25-10 mm²

[Self adjustable Crimper Plier Tool] – According to the requirements of the terminal, it automatically adjusts itself to the appropriate diameter for crimping, easy to operate.

24"w X 6"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X "w X 7.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment

Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow

Designed for ventilation applications including HVAC, dryer, grow rooms and tents.

Four-layer design makes it more durable and resistant to leaks, tears, and cuts.

Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.

Excellent Odor Control: Made of premium RC 412 Australian Virgin charcoal at 1200+ IAV, helps to eliminate pungent smells and chemicals; The 38mm thick charcoal bed with high microporosity ensures its high absorption

Unique Design: The dual-sided galvanized steel mesh adopt round hole design, which greatly increases the open area and ensures the max. airflow 223 CFM; The lengthened carbon canister enables a higher filtration rate

Versatile Applications: The detachable pre-filter cloth blocks 99% particles to keep the filter clean; Effective to eliminate odors and gaseous compounds for indoor grow tent, hydroponics room, kitchen or basement

Cutting and Crimping Tool designed to crimp insulated and non-insulated 10 to 22 AWG solderless terminals and connectors

Crimper features tapered nose design for working in confined spaces

Contoured thumb area for additional comfort and positive feel and specially hardened cutter in the nose

5-Blade Crimper

Creates a longer, shallower professional grade crimp

Tighter fitting, leak proof connection

Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.

Dynamic temperature and humidity programming, with timers, grow cycles, scheduling, minimum speed.

Connect with our app via Bluetooth to access advance programs, alarms, notifications, and view climate data.

Designed to ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks.

Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls.

Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance.

Compression crimper provides fast, reliable multiple-type compression connector installations

Crimps compression F, BNC, and RCA connectors to inside (premises) coaxial cable: Mini-coax, RG58, RG59, RG6, RG62, and RG6QS

Adjustable universal plunger ensures optimized crimping on multiple types of connectors

Product 1: FORGED IN ONE PIECE – The most durable, longest lasting striking tools available

Product 1: VERSATILITY ON THE JOB – Used for forming and shaping sheet metal, striking punches, chisels & peining rivets

Product 1: BUILT FOR THE PRO – Machinists, metalworkers, blacksmiths, contractors, tradesman & serious DIYers

Optimized for confined-space and short cable installation and repair

Crimps F, BNC and RCA compression connectors onto RG59, RG6 and RG6Q coaxial cables

Made of stamped steel for added durability

Combination Pliers strip and cut 8-16 AWG solid and 10-18 AWG stranded wire

Long nose for extended reach, grabbing and looping wire, and induction-hardened cutting knives for hard wire

6-32 and 8-32 screw shearing

Advanced do-it-yourselfer tool for fast, reliable F-connector installation

Fixed plunger allows quick, easy insertion and removal of cable and connector

Accepts many common F-connector compression fittings

The rivet has been reduced in size and moved closer to the jaws to create an ultra-high leverage design for 25% easier cutting power

Features a universal terminal crimper and a fish tape puller on the backside

Serrated cross-hatched knurled gripping zone on the jaws for pulling and gripping

Powerful Airflow: This VIVOSUN powerful blower with a fan speed of 2500 RPM can create an airflow of 195 CFM; It works efficiently in ventilating grow tents, transferring heat or cool rooms, circulating fresh air, as well as controlling proper humidity, temperature, and air quality for your grow area

Quiet Operation: Fitted with a flow deflector that concentrates the fan stream and cuts turbulent kinetic energy to reduce sound output to just 30 dB, which does not have any harm to your health and will not disturb your work

Safety Protection: The motor is ETL listed and features an automatic reset function to prevent overheating or other safety issues; The electrical junction box is made from flame-retardant components for fireproofing

Durable: The fan has a strong motor which features a permanently lubricated bearing that operates quietly and requires no maintenance

Compact But Efficient: This duct fan is compact and lightweight enough to be installed in areas with little available space; With a diameter of 6 inches, speed of 2960 RPM and 240 CFM air flow

Low Noise: Superior balanced centrifugal impeller for long service life & quiet operation; A less than 37 dB noise level does not have any harm and will not disturb your work

Meet ASTM F1807 Standard

Used to fasten PEX pipe to brass or poly fittings using copper crimp rings

New Product,smaller and lighter but provide same same pressure,no requirement for strength

Includes tools needed to prepare, connect and test coax cables

2-Level Radial Stripper is designed for easy single operation coax cable preparation

Compact Crimper quickly and reliably crimps compression F-connectors (6-Pack included)

Designed for ventilation applications including HVAC, dryer, grow rooms and tents.

Four layer design makes it more durable and resistant to leaks, tears, and cuts.

Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.

Designed for ventilation applications including HVAC, dryer, grow rooms and tents.

Four layer design makes it more durable and resistant to leaks, tears, and cuts.

Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.

Designed to ventilate hydroponic grow rooms, transfer heating/cooling, circulate air, cool AV closets, exhaust odors.

Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls.

Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance.

Meet ASTM F1807 Standard

With Interchangeable jaw set 3/8,1/2,3/4-inch, the tool itself is 1-inch

With Crimp Ring Removal Tool ,which Used To Remove 1/2-inch to 1-inch copper ring

Wire Rope Swager: IWS-1608B wire rope crimping tool has 5 cavities for 1/16’’, 5/64’’, 3/32’’, 7/64’’, 1/8’’, 5/32’’ & 3/16’’ wire rope cables. Swaging pressure is adjustable. Promises accurate & gauge free swages.

Wire Rope Cable Cutter: CWR-60 wire rope and cable cutter can be used with wire up to 1/8’’, features non-slip handles for easy grip. The shearing action is precise and leave no frayed ends.

All tool components are carbon steel and heat treated for maximum life. Smooth actuation mechanism allows secure connections with minimal force required.

Pliers black lacquered

Handles with multi-component grips

With bolted joint for higher stability and even movement

Meet ASTM F1807

Combo Crimping Tool for 1/2-inch and 3/4-inch

With high quality made from tool steel,come with 20PCS 1/2-inch and 10PCS 3/4-inch Copper Ring & Pex Cutter&GO NO GO Gauge

Pliers black lacquered

Handles with multi-component grips

With bolted joint for higher stability and even movement

Crimping Tool- Crimp various types of heat shrink connectors quickly and easily with the haisstronica wire crimping tool. Whether it’s wiring or rewiring boats, cars, or appliances, you’re likely to encounter the need to crimp a connector onto a wire.The jaws of the haisstronica wire crimper tool forged with precision technology can complete a firm crimp at one time. Instead of making your heat shrink look like it's been through a street fight.

Precision Ratchet Structure- A good product depends on exquisite workmanship! Features a comfortable grip and solid ratchet action for smooth crimp tool action and good release.After crimp secures tightly "like a solder" to the wire connectors. Make equipment more secure!

Ergonomic Design- The nylon, non-slip handle ensures comfortable and swift operation.There is a quick-release lever on the inside of the handle that opens the jaws.

Remove Tool Pex Ring Remove tool Ring Cutting Tool crimp ring removal tool copper ring removal tool.

Purpose: Copper Crimp Ring Removal Tool is designed to remove copper rings from PEX barb fitting connections to allow fittings to be re-used.

Capability: PEX Decrimping Tool works on 1/2 in., 3/4 in. and 1 in. copper crimp rings.

Purpose: PEX-1 F1807 PEX Copper Crimp Ring Angle Tool is designed to secure 1 in. copper crimp rings into place within PEX piping systems

Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Zurn, Apollo, etc.)

Secure Connection: Connections may be checked for security using the Go/No-Go Gauge (included). Each clamp ring shall be gauged to ensure that it has been crimped properly and for the accuracy of the tool