Best Usongshine in 2026

High Torque: Usongshine stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

Product size : 300 * 300 * 22 mm (11.8*11.8*0.87 inch). The working size is subject to the scale.

✿Updated Version✿✿✔✔✔The middle part of the honeycomb panel is upgraded from the original aluminum to iron, iron is more stability, durability and rust resistance, allowing you to cut or engrave with magnets to hold the material.

After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the wood are neat and clean, Less smoke and more effective smoke exhaust, and can make the cutting work clean and tidy.

Package included: 1 x Stepper Motor Driver.

✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.

✿The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Dimensions: 42x42x23mm/1.65""x1.65""x0.9"" ,1.8 deg. step angle(200 steps/rev),Rated current 1.0 A & resistance 3.5ohms.

Laser power: 5.5W, Machine output power: 40W.

Advanced Laser Technology: TTS-55 laser module uses the latest LD+FAC+C-Lens compression spot technology, fixed focus, focal length is only 23mm, compared with other long focus lasers, short focus laser has stronger engraving and cutting ability. Engraving accuracy: 0.1mm.

🍀32-bit Motherboard🍀 : The motherboard adopts 32-BIT dual-core MCU, which has a faster processing speed, and the engraving speed can reach 10000mm/min. Laser can engrave online and TF card offline engraving. Due to the built-in WIFI module, you can also use the mobile phone App and computer WEB for engraving.

Laser power: 2.5W, machine output power: 20W.

Fixed Focus Laser: TTS-25 uses fixed focus laser, no need to adjust the focus before engraving, engraving accuracy: 0.1mm.nge paper.

🍀 32-bit Motherboard 🍀: The motherboard adopts 32-bit dual-core MCU, which has a faster processing speed, and the engraving speed can reach 10000mm/min. Laser can engrave online and TF card offline engraving. Due to the built-in WIFI module, you can also use mobile phone App and computer WEB for engraving.

Material: Acrylic, plastic.

Size: 650x650x292mm (25.59 "x25.59" x11.49 ").

With Ventilation System: This kit has a ventilation system consisting of vents, 8025 fan, and 9.9ft vent hose. This Protective cover helps block the laser deflection and reduces the smoke and smells of the cutting/engraving. protects against fire, dust, smoke, order and noise.

Laser engraver enclosure size (31.49*31.49*15.74in/800*800*400mm), compatible with most engraving machines on the market as long as the size is within this range.

Dust and smoke proof, prevent the inhalation of toxic gas when engraving, ensure the health of your body, the enclosure is made of high quality double-sided silicone coated plexiglass fiber, can withstand temperatures up to 1832°F (1000°C) and immediately resist high temperatures to avoid fire, the outer PU cross layer is waterproof, easy to wipe and clean.

Dust and smoke proof, prevent the inhalation of toxic gas when engraving, ensure the health of your body, the enclosure is made of high quality double-sided silicone coated plexiglass fiber, can withstand temperatures up to 1832°F (1000°C) and immediately resist high temperatures to avoid fire, the outer PU cross layer is waterproof, easy to wipe and clean.

Diversified carving materials: 11 types of carving materials, including plywood, aluminum business cards, stainless steel dog tags, etc. This carving material kit can help you experiment with the carving effects of different materials and enjoy the fun of carving.

25 aluminum business cards: 5 different colors, anodized aluminum. The coating is non reflective and can carve out the exquisite patterns and characters you want, as well as create personalized business cards

50 unfinished pine cubes: Made of pine, free of burrs, smooth wood contact surfaces, no additional polishing, can be painted, and can be used to make letter cubes, number cubes, puzzles, or handicrafts and souvenirs.

TTS-10 Laser power: 10W, Machine output power: 80W. 6-time cutting experience: 8mm acrylic, 20mm plywood.

Main board upgrade: TTS 10 has upgraded the speed of the 32-bit main board to a maximum of 400mm/s. The powerful 10W diode laser power output and high-speed carving and cutting can help you complete artwork well.

Note 1: When cutting wooden boards, it is recommended to use them together with an air Assist to achieve the best results. This TTS 10 kit does not include air assist.

Laser power: 2.5W, machine output power: 20W.

Fixed Focus Laser: TTS-25 uses fixed focus laser, no need to adjust the focus before engraving, engraving accuracy: 0.1mm.nge paper.

🍀 32-bit Motherboard 🍀: The motherboard adopts 32-bit dual-core MCU, which has a faster processing speed, and the engraving speed can reach 10000mm/min. Laser can engrave online and TF card offline engraving. Due to the built-in WIFI module, you can also use mobile phone App and computer WEB for engraving.

Laser power: 5.5W, Machine output power: 40W.

Advanced Laser Technology: TTS-55 laser module uses the latest LD+FAC+C-Lens compression spot technology, fixed focus, focal length is only 23mm, compared with other long focus lasers, short focus laser has stronger engraving and cutting ability. Engraving accuracy: 0.1mm.

🍀32-bit Motherboard🍀 : The motherboard adopts 32-BIT dual-core MCU, which has a faster processing speed, and the engraving speed can reach 10000mm/min. Laser can engrave online and TF card offline engraving. Due to the built-in WIFI module, you can also use the mobile phone App and computer WEB for engraving.

5pcs/ Package

59Ncm(83.6oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x1.85" 4-wire

【Double Gear Extrusion Mechanism】The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.

【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.

【Application】This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 5 Pro,Ender 5 Plus,CR10 Serie,Voxelab Aquila 3D printer.

Motor Model: 42-34 Nema 17, widely work for Most 3D Printers (like CR-10 Series Z-axis or Ender-3 X/Y/Z-axis), machinery and equipment.

High torque -Holding torque up to 0.35Nm. Low loss stators have better high speed performance.

Size: 42mm X 42mm X 34mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable.

45Ncm(63.7oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x1.57" 4-wire

1.8 deg. step angle(200 steps/rev)

High Torque: Usongshine stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

Module Size: 27mm/1.06in x 15mm/0.59in; Cable Length: 100mm/3.94in; Weight: 5g

Package Included: 1pcs stepper motor parallel modules with 1pcs 100mm cables, easy to connect.

Application: special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.

2mm pitch, 4 starts, 8mm lead

High torque nema 17 stepper motor, 400mN.m/57.1 oz.in, 42mm, 2 phase 4 wires

Come with a brass nut and 1M (39.37") motor wire

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Dimensions: 42x42x23mm/1.65""x1.65""x0.9"" ,1.8 deg. step angle(200 steps/rev),Rated current 1.0 A & resistance 3.5ohms.

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.

Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

Double Z structure runs smoothly.

Simple assemble, no need other tools.

Cost effective upgrade kit and high performance.

Nema 23 cnc stepper motor, up to 425oz-in or 3Nm holding torque

Rated current 4.2A & resistance 0.9ohms. Step angle: 1.8°(200 steps/rev)

4-wire, 11.81" cable. Connection: Black(A+), Green(A-), Red(B+), Blue(B-)

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

Package in 3PCS

65Ncm(92oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x2.36" 4-wire

Good Torque Good Speed

0.35 deg. Step Angle

NEMA 17 bipolar 4-wire

High Torque Good Speed

0.067 deg. Step Angle

NEMA 17 bipolar 4-wire

Middle Size with Hight Torque

18Ncm(25.5oz.in) holding torque

NEMA 14 bipolar 1.38"x1.38"x1.34" 4-wir

Fine Resolution High Torque

44Ncm(62.3oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x1.85" 4-wire