Best Yokolos in 2026

▲【6AN Fuel Hose Kit】Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications, etc. NOT FIT E85.

▲【Universal Application】The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

▲【Hose Material】Inner Hose: CPE synthetic rubber; Middle layer: 304 stainless steel wire mesh sleeve; Outer layer: High quality braided nylon; T7 Aluminum Alloy.Premium nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.

Universal Fuel Pressure Regulator: The fuel pressure regulator is equipped with a reading gauge. The maximum fuel pump capacity is 140psi and can be adjusted from 0psi to 140psi. You can adjust the fuel pressure regulator to your needs and optimize the flow of oil. (Package Includes: 1x Fuel Pressure Regulator, 2x Hoses, 1x Accessories.)

SUITABLE: Universal for All Type Cars. Adjustable fuel pressure regulator, made of Premium aluminum construction, the effect is directly reflected in the throttle more easily, and sensitively, and the power is more obvious when increasing speed. Used to Keep the Stable Pressure in the Fuel System.

REGULATOR MATERIAL: High-quality aluminum alloy fuel pressure regulator and hose end fittings.Premium aluminum construction for ideal weight and superior durability. The built-in diaphragm, made of special material, controls the opening and closing of the pressure valve, which has a certain buffer effect on the average fuel pressure and makes the oil pressure more stable.

🔧🔧Fuel Pressure Regulator Kit: Pressure Fuel Regulator is adjustable from 0 to 100 PSI fuel pump capacity. designed to use with an electric fuel pump where fuel pressure is steadily delivered.

🔧🔧Oil gauge needle shows you exact reading & Tune the fuel pressure to meet your needs，The oil in the gauge stabilizes the needle to give you the most accurate readings.

🔧🔧Based on premium stainless steel & Aluminum Alloy materials & Nylon, securely, light weight and portable, Application: Universal, Such as fuel for automobiles or marine engines, most.

FITMENT: 2012 2013 2014 2015 2016 2017 2018 2019 RZR 570 ( NON-EBS ), 2014 2015 2016 2017 2018 2019 Polaris Ranger 570 ( NON-EBS ).

REPLACE PART OEM NUMBER: 1323255

Easy installation: 1. Perfectly Balanced Sheaves to Eliminate Vibrations and Increase Longevity. 2. Comes fully assembled with spring and weights for a hassle-free installation. 3. Direct replacement and requires absolutely no modifications to your machine. No Instruction Included, Professional installation is highly recommended.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

Net Weight: 8oz (227g) per cartridge

Height: 7. 25” Diameter: 2. 6”

Cartridge has a Notched Collar providing easier alignment in portable gas burners!

ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch)

Working Temperature: -40°F to +300°F

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 5.56 mm (0.22 inch), Outer Diameter: 11.17 mm (0.44 inch)

Working Temperature: -40°F to +300°F

ID: 1/2inch (13mm);OD: 0.75inch(19mm).Material: NBR.

Working Pressure: 217psi.Max Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 4.7inch(120mm).

Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

ID: 3/8inch (10mm);OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

25 Feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line

Can be used with unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E-85 and sour gas

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

ID: 5/16". OD: 0.43inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000 psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID: 13/32". OD: 0.543inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID:5/16". OD:0.465inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

ID: 3/8 inch, OD: 5/8 inch, 6 AN NBR liner hose fuel injection 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles temperature ranges of -40 to +275 degrees F

The more an engine is driven, the more carbon deposits can build up on fuel injectors, intake valves and ports

Gumout High Mileage Fuel Injector Cleaner is specially formulated to remove carbon deposits from engines with more than 75,000 miles

Cleans fuel injectors, intake valves and ports to restore performance, fuel economy and prevents future carbon build-up, which reduces emissions

ALL-IN-ONE FUEL: Ditch the gels, bars, chews, and pills and go all day with just Tailwind. Tailwind mixes with water to meet your calorie, hydration, and electrolyte needs, no matter how big a day’s in front of you.

NO GUT BOMBS: Sipping Tailwind provides steady, small doses of fuel that pass right through the stomach. The composition of Tailwind’s fuel matches what the gut is made to absorb, so Tailwind enters your system quickly, without taxing the digestive tract and causing stomach issues.

TASTY ALL DAY: If you don't like the taste, you won't drink it. That's why Tailwind has light, clean flavors that taste better the longer you go.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

[Size] ID of 8an fuel hose:0.43"(10.9mm),OD:0.64"(16.25mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:88.9mm.

[Application] 8AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

Provides easier and more reliable starts

Remains stable 2 years in the tank and 5 years in the sealed container

Extends engine life and improves the performance of outdoor power equipment

ID: 3/4 inch / 19mm, OD: 1.1 inch / 28mm, 12 AN NBR liner hose, 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F

ID: 5/8 inch / 16mm, OD: 0.9 inch / 23mm, AN10 NBR liner hose, 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F

1.5 feet of fuel injection hose designed specifically for auto and truck fuel injection systems

Can be used with gasoline, ethanol, extended gasoline, oxidized sour gas, diesel fuel, biodiesel (B5, B10, B20) and lubrication oil

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

For meausring fuel pressureFor meausring fuel pressure, automotive air line pressure or automotive sensor transmission, T-Fitting adapter allows users to install in the fuel line

Size: 1-1/2" dial size, center back, 8mm (5/16") Brass Barbed T-Fitting Adapter, 2 Stainless Steel Clamp with handle

Pressure Range: 0-15psi single scale