Best Yuyue Electronic in 2026

Size of the iron part: 187*116*98mm

Size of the plastic frame: outside 187*116mm, inside 181*110mm

Before purchasing, please compare the dimensions with your car stereo carefully. If you are not sure, please contact us directly for confirmation

This item is only compatible with the car DVD GPS navigation system with steering wheel learning.

OEM (the original car comes with navigation) GPS navigation is not compatible. There is no Bluetooth function.

Just put it in suitable place, Simple and easy copy operation, high correct ratio for copy.

SAFE DRIVING -Wireless steering whell controll, Provides control of ultimate precision and accuracy to ensure your safety and bring you the greatest convenience during the driving. Support to answer / end phone call and control the GPS navigation system.

EASY CONNECTION - This stering whell controller fit for all DVD GPS Navigation System Player that has steering wheel study functions.

ERGONOMIC DESIGN - Can be fixed on all steering wheel, LED backlit for each botton, convenient to use at night drining.improve great operation convenience and safety for user.

New design for the installation angle and height can be adjusted!

Easy to install.High quality power and ground wires. The lens power supply is connected to the reversing light power supply 12V! NOTE: The power supply must be 12V for operation. For your safety, do not use ignition power with the camera as this may cause the resistors in the plug to heat up and possibly melt.

Fits Spare Tire Jeep Wrangler JK JKU 2007-2018, Jeep Patriot 2009-2015, Jeep Liberty 2002-2007 For Aftermarket Head Unit Radio, Jeep Liberty 2007-2014, Jeep Compass 2009-2018, Jeep Commander 2008-2010, Jeep Grand Cherokee 2008-2013.

Listen to content from your Bluetooth capable device over your car's stereo system using the Bluetooth adapter.Works with any Apple/Android phone

This Buletooth adapter fits Audi and VW group cars with AMI or MDI port with 2G + AMI MMI.,Concert and Navigation Plug models

Activate the AUX mode in the MMI system and connect your smartphone with this bluetooth adapter, then you can listen music via the car stereo.

Mounts aftermarket radio in console pocket location

Recessed DIN radio opening

ISO mount radio compatible using snap-in ISO radio mounts and trim ring

Includes dash kit, wire harness, antenna and connectors

Direct connection to the factory harness without cutting any wires

Kit is made from high quality ABS, harness is made from factory quality wires and connectors

Allows new aftermarket stereo to be installed in factory location

Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the Dash Kit

Allows new aftermarket stereo to be installed in factory location

Precision designed for a gapless fit between the dash and the kit

Color and Texture matches the factory dash

✅ [STRONG ADHESION] GradCap Magnetic Phone Sticker is using 3M double-sided grade quality sticker and that is why it provides strong adhesive on its back - Keeping your device secure and stable while driving on any road conditions. Our Magnetic Plate will leave no marks or residuals after removing out from your phone or mobile case.

✅ [ULTRA THIN AND LIGHT] Although our metal sheet is made of premium-quality manganese steel material, the product is still less 0.5 mm in thickness.

✅ [COMPATIBILITY] These Car Metal Discs can work with all magnetic car mount, air vent holder, dashboard mount, windscreen mount, automobile cradle - Car Accessories which ideally designed for all drivers.

Includes everything needed to install an aftermarket radio into your 2009-2010-2011-2012-2013-2014-2014 Ford F-150; compatible with single ISO with pocket or double DIN

Single ISO with Pocket or Double DIN Dash Mounting Kit for 2009-2014 Ford F-150; fits all trim levels - see image for reference

Antenna Adapter for 2009-2014 Ford F-150 models

Includes everything needed to install an aftermarket radio into your 2009-2010-2011-2012-2013-2014-2014 Ford F-150; compatible with single ISO with pocket or double DIN

Single ISO with Pocket or Double DIN Dash Mounting Kit for 2009-2014 Ford F-150; fits all trim levels - see image for reference

Antenna Adapter for 2009-2014 Ford F-150 models

Allows new aftermarket stereo to be installed in factory location of vehicles with a non-factory amplified systems

Precision designed for a gapless fit between the dash and the kit

Color and Texture matches the factory dash

Allows new aftermarket stereo to be installed in factory location

Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the Dash Kit

This BATIGE flush mount cable design for car,boat and motorcycle,dual USB 3.0 A male to USB 3.0 A female extension flush panel mount waterproof cable.

Mount cable can be used above the base of the car's dashboard or on the other dashboard,such as boat,motorcycle.

Use an existing hole or cut a hole on your dashboard and clip in the socket to flush mount it to your vehicle's,boat’s and motors.

15v rms max input level

12.2v max output level

frequency response: 10hz-35, 000hz

For Cobra 75WXST CB Radios

Fits for Wrangler JK Models 2011-Present

Iron Clip Separate For Yeasu Series FT-1807/FT-1907/FT-7800/FT-7900/FT-8900/FT-8800 also

Universal Under Dash/ Overhead Car stereo mounting Dash kit

Radio Housing

For Car Installation

Allows new aftermarket stereo to be installed in factory location

Precision designed for a gapless fit between the dash and the kit

Color and Texture matches the factory dash

Allows new aftermarket stereo to be installed in factory location

Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the Dash Kit

Allows new aftermarket stereo to be installed in factory location; See fit guide in images to verify that your vehicle is compatible

Fits Double DIN stereos with a maximum screen size/faceplate opening of 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the dash kit

Compatible with Mitsubishi Lancer / Lancer Evolution 2007-2017

Installation kit that allows the replacement of the OEM radio with a after market radio; kit Features; iso din head unit provision; painted Silver to match factory finish;

Kit components; A) Radio Housing; B) Radio ISO Brackets; C)(4) #8X3/8IN Phillips truss head screws;

Wiring and antenna connections; harness: ; xsvi-5524-nav ford interface 2014-up (sold separately); antenna adapter: ; 40-eu10 multi-app adapter (sold separately);

Size of the Iron Part - 185 x 115 x 100 mm. Please confirm whether your car model is suitable before purchasing.

Size of the Plastic Frame - Outside 185 x 115 mm, inside 180 x 100 mm. Before purchasing, please compare the dimensions with your car stereo carefully. If you are not sure, please contact us directly for confirmation.

Features - Car Panel Frame Easy installation, This iron frame is suitable for standard double din head unit.

Universal Double Din Stereo Fitting Cage Kit 182*101mm Radio Head Unit.

Secure & Universal fitment with the strong metal design, easy for installation

This fitting cage fits most Double Din aftermarket head units. It is designed to securely hold the stereo in the dashboard.

3.5mm to 3.5mm (male to male) interface connection cable

Dash mountable 3.5mm to stereo RCA audio input port (female to male)

This cable is waterproof panel/dash mount with rubber

Size of the iron part: 187*116*98mm

Size of the plastic frame: outside 187*116mm, inside 181*110mm

Before purchasing, please compare the dimensions with your car stereo carefully. If you are not sure, please contact us directly for confirmation

Easily install an aftermarket radio in your vehicle with this Maestro KIT-F150 dash kit, which works with 2013-2014 Ford F-150 pickups with a 4.3" My Ford radio.

The kit comes with an installation harness and mounting brackets.

With a 4.3" My Ford radio for use with your existing model. Note: Maestro RR required (not included).

Universal Fitment

Secure Fitment

Easy installation

Allows new aftermarket stereo to be installed in factory location

Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the Dash Kit