Best Partsam Automotive Marker Light Assemblies in 2026

CONVENIENT - No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.

BETTER THAN THE REST - Our lights are IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.

ATTENTION TO DETAIL- Top markings allow you to quickly orient your lights for better function and appearance, convenient wire feed notches simplify wire routing, and a single stud mounting system means install is a breeze.

Package Includes: The package will contain 3/4" 10 pcs of Amber Lights + 10 pcs of Red Lights + 10 pcs of White Lights Round Trailer Side Indicator Marker 12V DC suitable for Truck, Caravan, Bus, Pickup, RV, Lorry, etc.

High Brightness: Each Light Comes with 3 pcs of High Quality SMD LED existing 50,000 hrs for Working Life with an energy-saving bulb that gives about 60 lumens which outputs high luminous efficiency to save your life on the road.

Qualifications: Waterproof, shockproof, weatherproof, dustproof and vibration proof, come with good design sturdy and durable with high quality materials, such as silicone rubber housing and PC lens, which have no shade color.

Warning: Wires come out from the conner, NOT from the center. (Check image 2)

Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】

Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.

Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety

Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare

Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse

12V,universal design for all cars, SUV, pickup,truck,trailer,boat etc.

3 LED lens inside of the lamp offer extreme bright light. SAE P2 PC,DOT. Waterproof Lens,sealed Light

It can be used as clearance Lamps, side marker or identification light,Trailer Light etc. 3 colors of light for your choice: amber,white,red.

✅【Pack of 20】20 x Blue 3/4'' Round Trailer Side Marker Lights with rubber grommets. Voltage: 12V DC, Power: 0.5Watts, Current: 0.02-0.04A, Lumens: 60LM, Waterproof: IP68. Mini size, flush mount.

✅【Application】Commonly used as Trailer Side Marker Lights, Clearance Lights, Side Lights, Grille Lights, Signal Lights, Led Rock Lights, Underglow Lights, Identification Lights, Tail Lights, Puddle Lights, Interior Lights, Exterior Safety Signal Lights, etc.

✅【Universal Fit】Widely used for 12V Pickup, Car, Trailer, Truck, RV, ATV, UTV, RZR, Bus, Wrangler, Golf Cart, Offroad, Van, Caravan, Lorry, Semi Trailer, Cargo Trailer, Boat Trailer, etc.

Fitment: Compatible with Jeep Wrangler 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006.

Package Includes: 2 x Signal Side Marker Lights Lens. (Driver and Passenger) + 2 x LED Amber Light Bulbs.( LED light bulb non-polarity, don't need to worry about positive and negative connections)

High Quality: HERCOO's park signal front marker lights covers is made of ABS/PC materials (anti-scratch, waterproof), special coating on the lens surface prevents hazing and fading, ensuring proper illumination and operational safety.

【Fitment List】: LED side marker light compatible with 1981-1991 Chevy/GMC C/K 1500 2500 C10 C20 Suburban Blazer Jimmy, please check the fitment list pm below content for detail. Replace part number: ‎915557, 915558, ‎GM2551107, GM2550115.

【6X Brighter Than Stock Light】: D-Lumina side marker light is built with 100% advanced high brightness LED chips with intensity lighting output and low power consumption, which was 6x brighter than factroy light bulbs. Cool appearance design, adopt a unique outlook and the distinctive appearance to make your car look more refined and prominent. Direct upgrade replacement part to replace the reflector/cover or broken original lamp.

【High Quality Performance】: These LED side markers are much brighter than stock lights, built-in high power 42 SMD LED chips, made of high quality ABS plastic housing and PC lens with chrome trim, Triple-Layered coating. IP67 rated waterproof. Canbus LED control unit design, no error code.

Package Includes: the package includes 30 pieces 6.4 inch side marker indicator lights, chrome bezel and mounting screws are included for easy mounting; The number and brightness of car lights are sufficient for you and family members when driving or lighting, adding a stylish overall look to your vehicle and making it eye catching

Quality Materials: the trailer marker lights made of dustproof ABS and IPX6 waterproof material, reliable, not easy to deform and break, and can keep for a long time; You can use it without worrying about breakage, maintain reliable brightness in rain or harsh environments, effectively keep your driving safe

Easy to Install: this LED marker clearance lights are hardwired with 2 wire pigtails, yellow is positive, black is negative/ ground; This rectangle LED light is surface mount and you can mount somewhere as long as the size fit, looks nice on your bumper, cab and sleeper kits, somewhere else you can imagine

WIDE APPLICATIONS: The round clearance light fits for truck, trailer, van, pickup, motorcycle, ATV, snowmobile, RV, etc. Installed on the side of the car can be used as Side Marker Light, Clearance Light, Turn Light, Signal Light, Reverse Light, Running Light, Decorative Light, etc. Installed on the roof, bottom, front and rear of the car as LED Rock Light, Bumper Light, Grille light, Cab Roof light, Tail Light, etc.

TOP QUALITY MATERIALS: The LED Clearence Light was made of Waterproof PC lens, rubber cover sealed light and potting glue sealed wire combined makes the light super durable, waterproof rate IP68. No cracks forever.

LED MARKER LIGHTS FOR YOUR CAR: Each 3/4" amber round marker clearance light fits for any 12V vehicle. Each marker lamp is equipped with 3 SMD LEDs: 100,000 hours of service life, 60 lumens of energy-saving output. High luminous efficiency and high brightness meet all driving needs.

APPLICATION - Driver and passenger side marker lights Compatible with Chevy Cruze 2011 2012 2013 2014 2015, 2016 Chevy Cruze Limited. OEM Part Number: 95186926, 95186927. Partslink Number: GM2550198 GM2551198.

UPGRADED DESIGN - BESTVIEW front LED side marker light is powered by 36pcs amber color high power LED chips, form the perfect focal strip with a super bright lighting output. Greatly improve vehicle identification and enhance safety factors at night.

INSTALLATION -Plug and play electrical hook up, easy to replace existing front bumper LED side marker light assembly with no tools required. Canbus LED control unit design, no error code.

4PCS Side Marker Light Retainer

F81Z15A436AA F81Z-15A436-AA

Fitment Type Direct Replacement

Enough to Use and Replace: the package includes 60 pieces of flush mount LED emergency lights in 3 colors, and some foam adhesives, abundant in quantity and rich in color, meeting your daily use and replacement needs; The foam adhesives can be attached to the back of the emergency lights, and you can also use your own adhesive for firm installation

6 LED Design: each LED side marker light is designed with 6 pieces of LED, which can give off a bright light, providing fine visibility during the day or at night, improving driving safety, giving you a nice using experience

Easy to Install: each LED trailer marker light is equipped with 2 wires, the black wire is for the negative pole, the color wire is for the positive pole; And the foam adhesive we provide can make your installation more convenient, saving you time and energy

APPLICATION - LED front bumper lights compatible with Chevy Camaro 2010 2011 2012 2013 2014 2015. Part number: 92246244 92246245 GM2551197 GM2550197.

UPGRADED DESIGN - BESTVIEW front LED side marker light is powered by 42 pcs SMD LED chips, which form the perfect focal strip with a super bright lighting output. Greatly improve vehicle identification and enhance safety factors at night.

INSTALLATION -Plug and play electrical hook up, easy to replace existing front bumper LED side marker light assembly with not tools required. Canbus LED control unit design, no error code.

[Material] Each lamp uses 3pcs SMD LED to output excellent bright light and ensure better visibility and safety at night.

[Waterproof] The combination of waterproof PC lampshade, rubber cap sealing lamp and potting glue sealing line makes the lamp super durable.

[Basic Introduction] Size: 0.75 inch, power: 0.3W, power cord length: 9.8 inch.

【Quality Material】: This car bullet light is made of selected materials, with a high quality plastic lens in the middle and an upgraded stainless steel chrome bezel on the edge, which is strong and durable, with 3 high quality LEDs inside the light to provide extremely bright light. Service life of more than 30,000 hours.

【Universal Accessories】: High brightness light output, high luminous efficiency. Working voltage from 12V to 24V, small size and exquisite appearance with lead, can be used as side marker light, LED fender marker light, clearance light, identification light, turn signal light, tail light, parking light, brake light, etc. Suitable for truck trailer, van, bus, caravan, boat.

【Waterproof Function】: Waterproof with IP67 waterproof index. Consists of lens and stainless steel chrome plated bezel, completely sealed, rugged, resistant to collision, corrosion, dust and moisture. It can work in the environment from -40℃ to 80℃, and can be used all year round, not afraid of wind, frost, rain and snow.

Enough to Use: you will receive 20 pieces of LED trailer lights in red, equipped with 40 pieces of screws, abundant in quantity, enough to choose and replace, easy to meet your daily needs

Easy to Operate: you can use the screws we provide to install the trailer marker lights, just tighten the screws to complete the installation, saving your time and energy; Please note that red is the positive terminal and black is the negative terminal

Reliable Material: the side lights for trailers are mainly made of LED and plastic material, sturdy and reliable, strong and solid, not easy to break or deform, with smooth surfaces, comfortable to touch, not easy to scratch your fingers

(Latest styles) : the package comes with a total of 5 pieces Amber and 5 pieces Red of 2-LEDs marker lights for trucks in 2 different colors, and 20 pieces of screws.

(easy installation) : we have prepared 2 pieces of screws for each truck running marker light, you can conveniently and easily apply them; What's more, red/yellow is the positive electrode and black is the negative electrode, the installation can be completed by tightening the screws.

(Wide Range of Applications:) : these truck marker lights are suitable as 2-LEDs marker lamps, car side lamps, rv lamps, trailer lamps for many kinds of cars, such as trucks, trailers, pickup, travel trailers, Camper, boat trailers, RVs, off-road vehicle, and more.

✅Compatibility: Toyota Yaris 2005/12 - 2011/03;For Toyota RAV4 2006/01 - 2009/02;For Toyota Auris 2007/03 - 2010/04;For Toyota Corolla 2007/03 - 2010/06.

✅ Side Markers Turn Signal Light Assembly ,replace OEM Part #81730-02080, 81730-0D030,81730-0D032, 81730-0D060, 91730-0D060.

✅Total of 18 pieces amber yellow LED lights Wonderful performance will give you an unbelievable experience.

Direct replacement - this side marker light assembly matches the fit, function and appearance of the factory assembly on specified years, make and models

Ideal solution - reliable replacement for an assembly that has failed due to moisture infiltration or collision damage

Durable construction - this assembly is made from quality components to ensure reliable performance and a long service life

4 PCS high brightness 2835 SMD LEDs/bulb+ PC lens to output bright light.Ultra-thin universal fitment design making them ideal for front or rear, side or top of vehicle applications, improve visibility and safety.

Surface mount design,super easy to install! Comes with gasket and mounting screws.2-Wire design,red wire connect to positive pole,black wire connect to negative pole.

Fit for any DC12-24V vehicles,such as trailers clearance bus van caravan boat pickup truck etc.Widely used as led trailer light,side marker lights, clearance light, turn signal light,tail light,brake light,running light.

(Latest styles) : the package comes with a total of 50 pieces White of 3-LEDs marker lights.

(easy installation) : 3/4 inch mounting hole, easy to install without screws, you can conveniently and easily apply them; What's more, white is the positive electrode and black is the negative electrode.

(Wide Range of Applications:) : these truck marker lights are suitable as 3-LEDs marker lamps, car side lamps, rv lamps, trailer lamps for many kinds of cars, such as trucks, trailers, pickup, travel trailers, Camper, boat trailers, RVs, off-road vehicle, and more.

Fitment: The LED side marker light compatible with 2004-2008 Honda Acura TL Base Models. Note: NOT compatible with Type S.

Replacement: Replacement for 33850SEPA01, 33850 SEP A01, 33850-SEP-A01(Front, Left) ; 33800SEPA01, 33800 SEP A01, 33800-SEP-A01 (Front, Right); 33655SEPA01, 33655 SEP A01, 33655-SEP-A01 (Rear, Left); 33650SEPA01, 33650 SEP A01, 33650-SEP-A01(Rear, Right); AC2550104, AC2860100, AC2555104, AC2861100(Other).

Feature: Made of high quality automotive grade plastic, wear resistance, stable and reliable, high strength, good impact resistance, not easy to damage, good anti-aging performance.

[Perfect Fit] LED Rear Top Cab Marker Lights Assembly Replacement for 2014 2015 2016 2017 2018 2019 2020 Ram Promaster 1500 2500 3500 Vans with stock cab marker lights. As DC 12V Rear Roof Top Cab Marker, Rear Roof Top Running Light, and Rear Roof Mounted Clearance Light.

[High Quality] Broview LED Amber Rear Roof Cab Marker Lights Kit includes 5x amber cab marker running clearance lights, foam gaskets, and screws. All adopt high-quality OE-grade materials and upgraded led chipsets. Every kit features a UV-treated pc lens and will not fade from prolonged exposure to sunlight.

[Extremely Bright] New Red LED Rear Top Cab Marker Lights adopt upgraded red SMD LED, which outputs 3 times brighter light than others. Each Rear Cab roof light comes with a bulb holder for a regular bulb, is super bright, and provides better night vision visibility of your vehicle on the road.

Replace OE/OEM Part Number: 42334144, 42334145.

Fit for Chevrolet: Cruze Diesel, Cruze L, Cruze Limited.

Package include: 1 pair (driver & passenger side).

COMPATIBILITY : The front fender side marker lights kits compatible with the 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Wrangler TJ SUV, OEM Part Number: 55155629AC 55155628AC.

5X BRIGHTNESS: POPMOTORZ side marker signal lamps with high power 54 leds(SMD 4014), led strip gives your car clear look, brighter than halogen bulbs, low power consumption, high efficiency and energy saving.

HIGH QUALITY: The smoked lens front bumper side turn signal lamps adopts PC lens and ABS plastic shell, sealed design, waterproof, scratch-resistant, long-term exposure does not fade, adapts to various extreme weather, and is not rust after heavy rain or car wash.

【Matching models】This LED Bumper Side Marker Lights Compatible with: 2015 2016 2017 2018 2019 2020 2021 2022 Ford Mustang. OEM Part number: FR3Z-15A201-A, FR3Z-15A101-A, FR3Z15A201A, FR3Z15A101A.

【Superior Quality】Extreme High Power Bright White 80SMD Upgraded Ford Mustang LED Bumper side marker lights. 100% brighter than your stock factory side marker lights,ultra-low-loss 80% lower consumption ensure longer lifespan.Brighter plus longer lifespan is worth and make your Ford car a whole new look and feel.

【Technical Parameter】Built-in Components: Integrated Superior Circuit Board to ensure safty and high efficiency. Black PCB assembled with High Output N Ultra-low-loss. Built-in Canbus design no errror or hyperflash on your car computer system, which makes retrofit easier and quicker.

Fitment: Compatible with Dodge Ram 1500 2500 3500 2003-2010 , Ram 4500 5500 2008-2010, Ram 1500 2500 3500 4500 5500 2011-2018

Super Brightness & New Upgrade: More than 20,000 working hours roof cab marker light. 6000K bright pure white to replace old and dull roof cab marker lamp, brighter than halogen bulb lamp. Compared to the stock light, this newly upgraded white LED cab marker lights with super lighting for added safety at night. It can play a certain warning effect on passersby& drivers

High Quality Raw Material:Made of high quality ABS plastic by approved to gurantee anti-scratch, waterproof, no faded with long-time exposure, can handle tough environments. The roof lights assembly are built-in advanced high brightness 24pcs LED chips, durable use.

COMPATIBILITY: This rear white side marker lights is compatible with 2010-2014 Ford Mustang S197. OEM Part Number: AR3Z-15A201-D, AR3Z-15A201-C.

5X BRIGHTNESS: Gempro led side marker rear bumper indicator lamps equips with LED chips, low power consumption, high efficiency and energy saving. Error free design, no flickering, perfect upgrade and best replacement for the old or burnt out rear marker.

DURABLE DESIGN: These side marker reflector lamps are weather-sealed, Waterproof/Dust proof/Shockproof. Made of light-weight durable ABS plastic housing and tough PC lens, lifespan more than 55000 hours.