Best Led Automotive Replacement Pushbutton Switches in 2026

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Diecast zinc alloy housing, push button momentary type can be used as starter switch or horn switch.

Rated up to 50 Amps at 12 V, mounted to panels' 5/8" hole, up to 3/8" thick.

With sealed rubber cap for water, moisture and dust proof, includes cooper terminal screws.

Push Button Switch Dimension: This pushbutton with require 3/4''(19mm) diameter Panel Mounting Hole Size. The 2mm Raised Button for easy operating.

Momentary Push Button Switch rating: 5A 250VAC; 10A 110VAC; 10A 12V DC, with Screw Terminals, easy to contact wires. Durable: More than 50,000 Cycles Long electrical life.

Black Horn Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Includes Red Neoprene Cap for Extra Protection Against Dirt and Moisture

Mounts in a 5/8" Diameter Hole in any Orientation

Rated for 60 Amps at 12 Volts

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ16mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

Switch Size:70x10mm/2.1"x0.4";Mounting hole: 8mm/0.315''

Switches are widely used in automobile hood, ceiling lamp, chassis lamp and trunk notification.

This switch is instantaneous switch, on/off.

Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant

12V DC, 50A, SPST (single pole, single throw)

Material: Diecast Aluminum & Plastic. Contacts are pure copper for long life . Screw terminals are brass, nickel plated

Includes Black Neoprene Cap for Extra Protection Against Dirt and Moisture

Mounts in a 5/8" Diameter Hole in any Orientation

Silver Contacts Rated for 60 Amps at 12 Volts

Quick & easy installation.Chrome plated metal knob

Inclde 2 PCS

Durable materials protect from breakage and corrosive materials

Momentary Type: Push & Hold - ON, Release – OFF.

Mounting Hole Size: Φ16mm, Switch Rating: 2A / 36V DC / AC, Switch Combanation: 1NO.

Head Shape: High Round;Screw clamp type terminals to make fitting very easy.

Momentary Type: Push & Hold - ON, Release – OFF.

Mounting Hole Size: Φ16mm, Switch Rating: 2A / 36V DC / AC, Switch Combanation: 1NO.

Head Shape: High Round;Screw clamp type terminals to make fitting very easy.

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ19mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

FEATURES - Adopting capacitive sensing technology with green and yellow indicator light display, high sensitivity, stability and strong anti-interference ability, utilizing high quality material in manufacturing processes result in products that deliver exceptional wear resistance performance. The 6 gang switch control 6 light bars and other devices at the same time, make the inside vehicle neat and beautiful. Each circuit: 40A.

SAFETY PROTECTION - The circuit control panel with fuses, relay and temperature protection switch, when the temperature is higher than 100℃ and all the relay will be automatically disconnected, the whole circuits have over-voltage protection, over-current protection and reverse polarity protection.

CONSIDERATE DESIGN - The light bar switch panel kit contains all necessary accessories, equipped with mounting bracket to install switch panel, don’t need to dig hole,10pcs zip ties help you manage the wires better make sure inside tidy after installation and easy plug & play wires. 50pcs reusable DIY stickers by your favor and need.

Latching Type: Push it, ON; Push it again, OFF

Easy to install,Screw clamp type terminals, don't need to solder,the installation method is easy to understand

IP67 Waterproof & IK10 Protection: Rustproof, can be used in wet or dusty environment

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ12mm, Switch Rating: 2A/36DC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

Current & voltage: 50A/20A & 12V，Material: Aluminum Alloy and Plastic

Built in start button，red LED toggle switch with Black aircraft style cover

Made of carbon fiber, durable and comfortable touch feeling，Pre-drilled mounting holes，Easy for installation

¡¾ LED Light Push Button Switch ¡¿-- LED light push button is built on it's own circuit , lighted when on, or could be wired to make it lighted alternate. Contact Configuration: 1NO; Screw Thread Width: 12mm / 0.47"; Dimension: 0.7 x 2.2cm / 0.28" x 0.87"

¡¾ For Various Electric Equipment ¡¿-- Latching switches are used for various additional electric equipment, inside & outside the car. LED Voltage: Red LED - 2V; Green, blue, white LED - 3V. When the voltage is higher than 2V or 3V, you need to add external resistor

¡¾ Premium Quality & Easy Installation ¡¿-- LED push button is made of premium brass plated material, high-grade appearance, nice touch feeling, and abrasion resistant, to ensure maximum durability for long lasting usageHole size required is 12mm. Easy to install, screw clamp type terminals to make fitting very easy, no cutting, or drilling required. Copper plating silver pin terminals for good conductive properties

✅[Feature] : Door pin switch is ON-OFF momentary design.The rating is 20A 12VDC. When the switch is depressed, it breaks the circuit.

✅[Switch Size] : Mounting hole size is 0.315 inches (8MM). Total length is 2.78 inches(70.5 MM). Length adjustable by move two lock screws.

✅[High Quality Material] : The door pin switch is made of metal with chrome plated.The push actuator is made of plastic. Durable material ensures durability and longevity.

Specifications: You will get a Brand New Green Aluminium Mushroom Head Push Button Switch.The rated voltage of this switch is: 250V AC, rated current: 5A, required aperture: 7/8''/22mm.

Function: Mushroom Momentary Push Button Switch.The switch is compact and operates quickly and gently.

Design: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).Contact Configuration: 1NO.