Best Acdelco Automotive Switches in 2026

🔋【Material】: Heavy duty battery shut off switch made of ABS plastic housing, and the 4 sets of bolts is tinned copper studs(2 x 3/8" (10mm) & nuts for ignition protected to distinguish the different gears easily which you switch to even at night.

🔋【Easy Operation】: RV Battery switch with On/Off position in clear color labels. Switch ON=Power (green) to closed circuit, Switch OFF = No power (red) to the cut-off circuit.

🔋【Compatible 】: Used for 12-48V, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V, battery selector switch can stand alone or be locked together with other switch for minimizing battery loss and preventing electric leakage effectively.

Easy to Use Kit for a Professional Installation

High Current (180A Continuous/1000A Intermittent) Battery Disconnect Switch with Black On/Off Plate

Contains #2 3/8" Copper Lugs, Heavy Duty Heat Shrink, and Rubber Terminal Insulators

Simple Operation:Switch on = Power; Switch off = No power.Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x3/8" (10mm)

Durable Material: This battery disconnect switch is made of ABS plastic housing, tinned copper studs and nuts.Come with 4 stainless steel mounting screws and caps to help fix the switch tightly. 4 Removable side plates provide access for battery cables

Safety Protection:battery shut off switch can disconnects the battery safely, protect batteries from excessive drain when vehicle or boat is not in use

Direct Replacement - This power seat switch is a direct-fit replacement electrically operated switch that replaces damaged OE units restoring door seat function, 8 pins terminal connector.

Excellent Quality - All of the switches are made to OE specification to ensure proper fit, form and function, copper alloy conductors ensure superior electrical conductivity with low resistive losses.

Ensure Fit - Compatible with 2007-2014 Ford Edge, 2007-2012 Ford Escape, 2007-2015 Ford Expedition, 2006-2015 Ford Explorer, 2008-2015 Ford F-250/350/450 Super Duty, 2009-2015 Ford Flex, 2006-2010 Ford Fusion, 2008-2015 Ford Taurus, 2007-2014 Lincoln MKX, 2007-2011 Mercury Mariner, 2006-2011 Mercury Milan, 2006-2010 Mercury Mountaineer, Please input your make, model and trim level into the Amazon Garage to make sure this part fits your exact vehicle.

Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits, equiped with 4 sets of bolts.

Operation: On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.

Compatible: used for DC 12 - 48 V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.

Perfect Design: Designed to connect and disconnect a DC12V 20A electrical circuit at will, SPST: ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. Fluorescent lamps will be lighted up when the switch is turned on

Safety Protection: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety

Easy Installation: Round on-off switch is easy to install, which is just direct setup, and no additional work required, our switch comes with a keyhole slot to prevent unwanted rotation

Designed to connect and disconnect an DC12V 20A electrical circuit at will,SPST:ON-OFF 2 pole；LED Color：Blue；Type:2 Pins (3 Pins with LED)

When the switch is on, The LED lights will come on；Hole diameter：20mm/0.8"；And it comes with a keyhole slot to prevent unwanted rotation；Pre-wired design:Easy to install, and saves unnecessary cost. Wire length: 200mm/ 7.8"

Coppery pin is connected to the battery negative pole,the next pin is connected to the battery positive pole,the last one is connected to the equipment positive pole

Heavy Duty: all aluminium housing, durable made for safety use. Mounts in 3/4" hole, equiped with a face plate.

Operation: On/Off 2 positions, 200 A continuous at DC 12V, 400 A momentary at DC 12V.

Compatible: used for DC 12 - 24 V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.

STURDY & FULLY ENCLOSED SHUT OFF SWITCH: The Heavy Duty Cut Off Switch is made of ABS plastic housing and copper tin plating inner stud. Fully enclosed design to protect wiring from dirt, corrosion, and rain. This is the best choice in harsh ocean conditions.

COMPATIBILITY & SAFETY: This Battery Kill Switch Used for DC 12 - 48V systems to isolate and secure the electrical system; eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely; provide a reliable way to shutdown electrical power during maintenance and protect batteries from excessive drain.

EASY TO OPERATE: On/Off 2 position, Suitable for various 12 V/24 V/48 V systems. Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec). Clockwise to turn on , counter clockwise to turn off.

STURDY & FULLY ENCLOSED SHUT OFF SWITCH: The Heavy Duty Cut Off Switch is made of ABS plastic housing and copper tin plating inner stud. Fully enclosed design to protect wiring from dirt, corrosion, and rain. This is the best choice in harsh ocean conditions.

COMPATIBILITY & SAFETY: This Battery Kill Switch Used for DC 12 - 48V systems to isolate and secure the electrical system; eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely; provide a reliable way to shutdown electrical power during maintenance and protect batteries from excessive drain.

EASY TO OPERATE: On/Off 2 position, Suitable for various 12 V/24 V/48 V systems. Current voltage: rating at 275 A continuous (1 hour) at 48 V DC and 1000 A for 5 seconds. Clockwise to turn on , counter clockwise to turn off.

Direct Replacement - This power seat switch is a direct-fit replacement effectively restores power seat function, robust design and high-grade materials meet the stringent demands.

Trustworthy Quality - All of the switches are manufactured to OE spec to ensure proper fit, form and function, copper alloy conductors ensure superior electrical conductivity with low resistive losses.Complete quality control is maintained throughout the manufacturing process.

Ensure Fit - Compatible with 2008-2016 Buick Enclave, 2013-2016 Buick Encore, 2005-2009 Buick LaCrosse, 2011-2015 Chevy Cruze, 2006-2011 Chevy HHR, 2006-2013 Chevy Impala, 2007-2013 Chevy Silverado 1500 2500HD 3500HD Suburban 1500 2500, 2007-2014 Chevy Tahoe, 2009-2016 Chevy Traverse, 2007-2016 GMC Acadia, 2007-2013 GMC Sierra 1500 2500HD 3500HD Yukon Yukon XL1500 XL2500 and more, Please see below detail description.

Product Name: Toggle switch; Country of Manufacture: CHINA;Feature: The waterproof toggle switch is made of metal and bakelite.The shaft, bracket and terminal of the switch are made of copper and nickel plating material. The main body of the switch is made of bakelite material.

Type:ON/OFF; Connector type: SPST, 2 terminal pin ; Rated Voltage & Current :15A 250V AC;30A 12VDC；Each terminal will be equipped with a wiring terminal, which makes wiring more convenient.

Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles,Total Size(Approx) : 30x15x52mm/ 1.2" x 0.58" x2"(L*W*H)

Heavy Duty: ABS plastic Battery Disconnect Isolator Master Switch with 2 Removable Key Rust and corrosion resistant, Solid cooper nuts and brass washers

Operation: 2 brass Copper pillar: 0.33"/8mm. used for DC 12-24 V systems, On/Off 2 position, rated current: 100A (12V ), Max. withstanding current: 200A (12V ).

Easy operation: disconnect and reconnect battery by one simple turn of the knob on it.The key Can Be Taken Down When There is No Power Connection.In this way,Power Supply Will Not Be Viciously Switched On.Waterproof Case Can Better Protect Key Hole.

Specification: Marine battery switch is in self-cleaning sliding contact design. Rated at 275 amps continuous, 455 amps intermittent, and 1250 amps cranking. Voltage: 12V-48V DC. Stud Size: 2x3/8'' (10mm)

Dual 1-2-Both-Off Battery Switch: With a battery shut off switch you can ON or OFF or both ON/OFF a group of loads irrespective of their individual ON/OFF switch control

Heavy Duty Boat Battery Switch: Made ABS plastic housing, and the 4 sets of bolts is tinned copper studs(2 x 3/8" (10mm). Marine battery kill switch Fits into the contour lock system allowing it to be a stand alone unit, or locked together with other switches

Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant

12V DC, 50A, SPST (single pole, single throw)

Material: Diecast Aluminum & Plastic. Contacts are pure copper for long life . Screw terminals are brass, nickel plated

Features: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety. Equipped with output short circuit, overload & polarity reverse protection. Up to 10000 times of ON/OFF operating life span

Perfect Design: Designed to connect and disconnect a DC 12V 30A electrical circuit at will, SPST:(single pole single throw), ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. LED on the switch will illuminate when the switch is turned on.

Widely Used: The 12v rocker switch mainly be used in car, ATV, UTV, SUV, wrangler, RV, off road vehicle, truck, boat, yacht & electronics modification, etc. Available for upgrading most wiring harnesses to control LED light bar, LED work lights, fog lamps, headlights, taillights & auxiliary lamps, etc

[PackingYou will receive] 2switches, 4screws and 4 plastic caps, 4 X 1007-20AWG which can be installed in wardrobes, cabinets, Storage Room，bookcases, cabinet doors, etc.

[Use Range]Cabinet Lamp Switch It can be used for AC-powered or DC-powered LED lighting devices, and can be installed in food storage rooms, wine cabinets, wardrobes, bookcases, cabinet doors, etc., and switch the lights by sliding doors.

[Product material]The shell material of the cabinet light switch adopts high-quality PC. Flame-retardant, high-quality materials ensure the safety of the switch, and it is environmentally friendly, non-toxic, wear-resistant, rust-resistant, corrosion-resistant, and can be used for a long time.

Quick & easy installation.Chrome plated metal knob

Inclde 2 PCS

Durable materials protect from breakage and corrosive materials

Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch; supported by major-brand bulbs from GE, Cree, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more; not compatible with smart lighting fixtures;interruptor dimmer

Features an easy-to-use slider for full-range dimming; to turn the light OFF, move the slider all the way down until it clicks

Side dial allows for user-friendly fine-tuning controls; adjust the lowest dimming level to stop light bulbs from flickering

Designed to connect and disconnect an DC12V 20A electrical circuit at will,SPST:ON-OFF 2 pole；LED Color：Blue；Type:2 Pins (3 Pins with LED)Color：Blue;The rocker toggle switch panel is made of high quality aluminum panel and ABS material, which is durable and waterproof

When the switch is on, The LED lights will come on；Hole diameter：20mm/0.8"；And it comes with a keyhole slot to prevent unwanted rotation

Coppery pin is connected to the battery negative pole,the next pin is connected to the battery positive pole,the last one is connected to the equipment positive pole;Metal panel size：95x65mm//3.7"x2.5"

HEAVY-DUTY DISCONNECT SWITCH: This reliable battery kill switch employs structural steel copper plated to provide perfect isolation and preservation for your vehicle’s battery

HIGH VERSATILITY: Able to handle 12-24V of 250A continuous and 750A momentary at DC 12V, our master battery cutoff switch works with top post batteries for a wide range of vehicles including most cars, boats, trucks, RVs, and even jet skis

EASY TO INSTALL & USE: assemble the battery shut off switch to the negative cable. Turns power on and off by just lifting the lever up or down, on/off 2 position

Size:Waterproof Push Button Switch with Black Rubber Boot features 4 inch wire leads.Button Diameter: 12mm, Mounting Hole Diameter: 12mm

Current& voltage:3 (A）& 250 (V);Constructed with high quality copper switch contacts and is rated for up to a 10 amp usage

Material: plastic,rubber,metal;Perfect for Automotive, Motorcycle, ATV, or UTV electrical applications like lighting and accessories, most DC electrical projects

[ Waterproof Rocker Switch ] --- Rating: 20A 12V DC; Type: 2 Pins (3 Pins with LED); SPST: ON-OFF; LED Color: Blue; Switch Holder: 0.75"/19mm(Inner Diameter); 1.1"/28mm(External Diameter); Package Includes: 5 x Round Rocker Switch + 2 x Switch Holder

[ Soft Lighting ] --- The 12v rocker switch built-in LED lights emit soft light when the switch is powered on and you can recognized it easily. No longer fumble for the 12volt rocker switch but clearly see it at the dark.

[ Easy Installation ] --- The blank holder is convenient to combine the switches 12v to install to any panel. The LED illuminated is equipped with a keyhole slot to prevent unnecessary rotation, no shake, no lossen.

RE-UPGRADE: The ordinary model is installed with 2 copper sheets, and the upgraded model has one copper sheet and 2 copper columns. The advantage is that it is easier to install and has better contact.

MORE CONVENIENT - The wireless remote control allows you not to open the hood every time to turn on the power, just press the remote control button to disconnect your car power system, saving you a lot of time and hassle, and the remote control improves safety.

WIDELY APPLICATION: The battery is small and space-saving. 250A rated current - suitable for any 2.5 displacement car, motorcycle, boat, camper, travel trailer, truck, jeep and other engine applications with a 12 volt battery.

EASY TO OPERATE: On/Off 2 position, Suitable for various 12 V/24 V/48 V systems. Current voltage: rating at 275 A continuous (1 hour) at 48 V DC and 1000 A for 5 seconds. Clockwise to turn on , counter clockwise to turn off.

STURDY & FULLY ENCLOSED SHUT OFF SWITCH: The Heavy Duty Cut Off Switch is made of ABS plastic housing and copper tin plating inner stud. Fully enclosed design to protect wiring from dirt, corrosion, and rain. This is the best choice in harsh ocean conditions.

COMPATIBILITY & SAFETY: This Battery Kill Switch Used for DC 12 - 48V systems to isolate and secure the electrical system; eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely; provide a reliable way to shutdown electrical power during maintenance and protect batteries from excessive drain.

Mounting hole size:12mm, 4 Copper Pin Switch. Blue LED Light.

Operation type Momentary: Pressing the button ON, Release the button OFF.

Switch rating:2A/36VDC, LED can be ON all the time or only ON when switch is ON, depending on how you wire it.

【Voltmeter & Dual USB Ports】:Integrated dual USB ports (10A/15A), 12V/24V DC power socket and cigarette slot 4/6/8 on/off rocker switch

【More safe and durable】: The product has passed CE, FCC, ROHS certification, adopts H65 copper and silver plating process, has a heavy-duty ABS fire-resistant UL94-V1 panel, built-in DC32V overcurrent protector, and the contacts are made of silver-tin alloy. The resistance is small, the circuit is stable, and the panel is protected from overheating, overcurrent, overcharging and short circuit, making it safer to use

【Multifunctional panel】:This product is mainly used to control the switches of air conditioners,lamps,washing machines,exhaust fans and other electrical appliances such as passenger cars,RVs, yachts, ships, etc

【 High Performance 】Use of premium quality ABS material to ensure its durability, resistant, high performance and a long life time guaranteed. Such a practical tool you will need it.

【 Practicality 】High-end car rocker switch, with LED work light emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark, very convenient, warm welcomed.

【 Convenient 】Full copper wire, better conductivity and longer lifespan. available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Driving Lights, Work Lights, Spot Lights, Zombie Lights, Rear Lights, Reverse Lights, etc. This is a perfect choice if you are in need of a rocker switch!

Battery Disconnect Switch: Marine Battery Switch Easy To Install 12V 24V 48V Battery Switch with On/Off position in clear color labels. Switch OFF = No power (red) to the cut-off circuit, Switch ON=Power (green) to closed circuit. Rating: 275 A continuous at DC 12V, 455 A Intermittent at DC 12V, 1250 A momentary at DC 12V..

WaterProof: Battery Disconnect Switch Marine Battery Switch is made of ABS plastic housing and copper tin plating inner stud. Fully enclosed design to protect wiring from dirt, corrosion and rain.

Comprehensive Safety: When Camper RV boat Truck Travel Trailer not in use, disconnecting the power will prevent the battery from draining. If the battery is not disconnected, it will continue to drain until the battery is depleted. When you come back to drive the car for a few months or even six months, the car will no longer be able to fire up. When the vehicle breaks down for maintenance, you can disconnect the current without having to remove the battery clamps.

Cycle Use： Manual Reset Circuit Breaker,No need to replace the inline fuse，can also be used as an on/off button switch for the battery

Overcurrent Protection：Compact and lightweight design,prevent excessive current, protect the trolling motor from electrical damage, prevents excessive current and stops power surges from damaging Amps

Wide Application：Usually used in auxiliary and accessory circuits for Boat, Marine, RV, Caravan, Winch, Tractor,Truck and ATV applications