Best Omix Ada Automotive Tail Light Assemblies in 2026

Warning: Wires come out from the conner, NOT from the center. (Check image 2)

Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】

Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.

Package incldues 2 Pieces White 7" Round LED Backup lights with reflex lens. Screws and thick mounting gaskets are included for complete mounting.

This is a 7 Inch Round LED Reverse lights which has 36 LEDs and works great for transit vehicles, bus, utility, and dome light applications. This 7" White LED Bus Tail Light is sonically sealed and waterproof with a surface mount light with mounting gasket. With the built-in reflex, the reflector in the center of the light can be visible from a long way off. They mostly works with the 7" round LED stop tail turn lights;

This 7 inch round back-up Light is 12V DC and is hard wired with separate ground wire: white is ground, black wire is dimmer for taillight/running light, and red wire is brighter for back up/revese lights mode. NOTE: These 7" School Bus lights can be used but they do not have flashing patterns. But with a proper relay it can be a flasher;

Compatible With 1999-2016 Ford F-250/F-350/F-450/F-550 Super Duty 1993-2011 Ford Ranger

Waterproof: This LED third brake light is IP67 waterproof, prevent from dust, mud, snow or heavy rain. UPDATE VERSION: according to customers' advice, we have already increased the LED brightness, especially the white cargo light; and adjusted the cargo light angle, white light will shine into the bed of the truck, super bright!

Sturdy Lens:High Quality 3rd Brake lights made by OEM approved manufacturers with materials that meet strict OEM requirements

[Package Content] 2pcs 3x5 Rectangle Led Tail Lights, Grommet Mount and Hardwired with 3 wire pigtails;

[Features] This 5x3 Red Tail Lights features 12 pcs super bright LED's that will help enhance your car's visibility even on foggy days and keep you and your loved ones safe. Serves as stop light, turn light, tail lights. NOTE: we call it 3x5 Rectangle tail lights on market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size), drill a hole about 5-5/8" to install it. For more information, please check the image1;

[HARDWIRED WITH 3 WIRES] White Wire is the Ground; Red Wire is the high brightness as stop/brake/turn signal lights; Black Wire is the low brightness as tail/running lights;

Package includes 1 set LED Tail Lights Assembly Kit, compatible with 1976-1983 CJ5 tail lights, 1976-1986 CJ7 tail lights, 1981-1985 CJ8 tail lights, 1987-1995 Wrangler YJ tail lights and 1997-2006 Wrangler TJ tail lights. Driver Side and Passenger Side are included. Come and replace your dim factory tail lights with our brilliant LED tail lights assemblies and get eye-catching;

This rear combination tail lights kit feature 12 large brake, parking and directional LED's, 6 license plate light LED's, 21 brilliant white Back-Up LED's and 3 side reflector light LED's;

Partsam LED lights are a direct replacement for your stock tail lights. These rear LED lights are completely compatible with your electrical system, and the wiring tips are as below: White is ground, blue wire is for backup reverse light, black wire is for tail/license plate light/side marker light and red wire is for stop turn brake light;

Mini Size Bright Lights For Your Vehicle, Each 3/4” mini side marker light comes with 3PCS SMD LEDs inside, outputs bright light. Hard-wire with 3-wire, Dual fucntion high low brightness

Hardwired with three wires, white is ground, red is high brightness for turn signal lights and black is low brightness for marker lights or running lights

IP67 Waterproof Rating, PC lens, rubber cover sealed light and putting glue sealed wire combined makes the light more durable

Package includes 1pc Rear high mount third brake light, compatible with 1988 to 1998 Silverado, 1988 to 1998 C10 C/K 1500 2500 3500 Full Sized Truck, 1988 to 1998 GMC C/K 1500 2500 3500 Full Sized Truck and 1988 to 1998 GMC Sierra LED 3rd Brake Light Tail Light;

About Silverado and Sierra Third brake light: Chrome housing, Polycarbonate Smoke Lens offer superior UV protection and a high impact resistance; Lamp Type: Brake and Cargo and Reverse; For Models Originally Equipped with Cargo Lights Only (Non Cargo Light Model might Need Modification to Prevent Light Function Issue)

Plug and Play: This 3rd brake light is plug and play. We also have some customers told that their plugs were different from the factory plug so they had to be cut off and spliced. The wiring tips are as follows(colors of the truck wires and light wires do not match): Truck Red to light's white, Truck yellow to light's red, Truck black to light's black and yellow (some customers may have to cut the yellow wire from the light plug and some other do not, it may depends), Truck white was not used;

Package includes 4 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation;

These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights); Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug; These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install; IP65 waterproof and please do not use it under water;

Easy to install: White is the ground, red is the high brightness and Black for low brightness; These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; 12 Volt DC Input;

Partsam ( 2 x White ) 4" Round Led Truck Trailer Lamp--reverse backup running Light, with 24pcs high power LED inside.

Application: Trucks,trailers (Boat, Box, Camper, Transport), 4WD, Caravans, Motor Homes, Boats / Marine, Earthmoving & Mining Equipment, Forklifts, Buses and Coaches, Camping, Fishing.

Dimensions: outer diameter 5.5inch, inner diameter 4" (check the picture 5), dill a hole about 3.85" to install it; Function as back up light, reverse light and running light.

Round red/Amber light serves as brake light, turn signal, and tail light: Outer Ring of LEDs comes with dual modes(high low Beam) and function as tail brake lights; Center Clear/Amber LEDs act as turn signal and Parking light

Outer Diameter: 5.6"; Inner Diameter: 4"; LED Quantity: 16 LED (Inner Yellow 6 LED + Outer Red 10 LED); IP65 waterproof light fixture; Drill hole: 3.8" in.(int.)/4.2" in.(ext.);

Easy Installation With High Quality Durable Round Stainless Steel Ring, HARDWIRED with 4-WIRE connection system for Ground, Turn Signal, Brake Light and Running Light: Black Wire - Ground / Red Wire - Brake Light / Yellow Wire - Turn Signal Light / White Wire - Running Light/Tail light

Package includes 6 Pieces 6" Oval Red Led Stop Turn Tail Lights, Hardwired, not plug and play;

12V DC; Each 6 inch oval led tail light has 10 Led Diodes. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; Light Size: 6.3" x 2.2" x 0.8"; Rubber Grommet Size: 7.2" x 3" x 1.5"; Drill hole: 6.5" In.;

These 6 inch oval led trailer tail lights are HARDWIRED WITH THREE WIRES: White Wire--Ground; Red Wire--high brightness for stop/brake light; Black Wire--low brightness for tail/running light;

Partsam ( 2 x Red ) 6 inch Oval Led Stop Turn Lights Rear Brake Tail Lights 24LED with Rubber Grommets and 3-Prong Wire Pigtails;

LED Quantity: 24PCS; Voltage: 12V; Color: Red; Light Size: 6.3" x 2.14" x 1"; Size with grommet: 7.28" x 3.2" x1.1"; you need an about 6.4" hole to install it; Sealed & waterproof assemblies, PC lens and housing welded together to ensure a permanent and water proof seal; LED circuit board coated with conformal coating for excellent moisture and environmental protection;

HARDWIRED WITH THREE WIRES: Black Wire - Ground; Red Wire - high brightness; White Wire - low brightness; Please Kindly NOTE: We have 2 different types of this light: one with White wire for ground, and the other with Black Wire for ground. Both with red wire for high brightness and are of the same quality, and will not affect your usage,thanks;

Package includes 2Pcs Universal Square 12V Combination 38 LED Signal Tail Light; Each one is equiped with 38 Super bright LEDs: 16 Red LEDs for stop/turn/tail functions, 18 White LEDs for backup function, 4 White LEDs for license illuminator; Both are set up for license plate lights as well as reverse lights;

These rear combination tail lights have studs on back sticking out will bolt to any flat surface; This is not a replacement for Wrangler YJ CJ JK tail lights, not factory mount. If you want to install it on wrangler trucks, you may need some modification: There is no wiring harness so you have to splice the wires yourself. Also, The bolt holes are larger than stock so you will need to drill out your body to make them fit. The entire assembly is a touch larger than stock as well;

DOT Compliant for street legal lighting. 12 volts; Low ampere draw; 3-stud mount design is easy to install on any vehicle exterior and the distance between the mounting blots is 2" ~ 2.2"; Resistant polycarbonate housing and acrylic lens provide weatherproof protection against water, shock & vibration;

Partsam (2 x Red in clear lens) 6.3" 24 LED Brake Stop Tail Turn Lights with rubber grommets and 3-Prong Wire Pigtails;.

LED Quantity: 24PCS; Voltage: 12V; Color: Clear/Red; Light Size: 6.3" x 2.14" x 1"; Size with grommet: 7.28" x 3.2" x1.1"; you need an about 6.4" hole to install it; PC lens and housing welded together to ensure a permanent and water proof seal; LED circuit board coated with conformal coating for excellent moisture and environmental protection;

HARDWIRED WITH THREE WIRES: Black Wire - Ground; Red Wire - high brightness for stop/turn /brake lights; White Wire - low brightness for tail or running lights; Please Kindly Note: We have 2 different types of this light: one with White wire for ground, and the other with Black Wire for ground. Both with red wire for high brightness and are of the same quality, and will not affect your usage;

Package includes 4 Pieces 4 inch round led trailer tail lights(2pcs red led lights and 2pcs white led lights) 12V DC, mounting screws and chrome rings are included. The chrome covers will dress it up very nice;

These round led tail Lights are impact resistant and less susceptible to shock damage. Each round LED Light is water-tight sealed and come with 15 bright LEDs. LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb;

These 4 round led stop turn tail lights are HARDWIRED with 3 wires pigtails: Black Wire - Ground; Red Wire - high brightness(red as stop brake lights or turn signal lights and white as backup lights or reverse lights); White Wire - low brightness as tail lights or running lights;

This smoke lens rectangular trailer light serves four functions: stop light, turn signal light, and taillight, and backup light in the center, this is white LEDs, but in clear lens in the center. It is a really nice low profile light for the back of your trailer or RV or motor home. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on;

This taillight has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light;

This Triple LED Trailer Light is hardwired with 6 wires: White is the ground, Blue is backup/reverse light, green and yellow is high mode for stop or turn signals, black(with 1/3 yellow) and brown(with 1/3 green) is low mode for tail or running lights;