Best Barometric Pressure Sensors in 2026

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

This Kit contains with 3pcs of digital sensor module, which can be independently enabled / disabled, which can measure not only the temperature humidity, but also the pressure.

The BMP280 sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.

Our BMP280 Sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy.

Not only the pressure and the temperature, this sensor can measure humidity.

Make sure to put SDO to high to get address 0x77. This will work with Adafruit BME280 library perfectly.

BME280 is a precision sensor, is soldered onto PCB. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

It is an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183.

The BMP280 is an absolute barometric pressure sensor especially designed for mobile.

This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!

Price For: Each Manufacturer: Adafruit Product Category: Adafruit Accessories RoHS: Product: Sensors Type: Board Mount Humidity Sensors Brand: Adafruit Packaging: Bulk

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices

Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3μA

BMP180 powerful 8-pin ceramic leadless chip carrier (LCC) ultra-thin package, you can directly through the I2C bus connected with a variety of microprocessors

This Kit contains with 3pcs of digital sensor module, which can be independently enabled / disabled, which can measure not only the temperature humidity, but also the pressure.

The BME280 sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.

Our BME280 Sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy.

BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices, perfect for your Arduino project.

The absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3μ A.

BMP180 uses a powerful 8-pin leadless ceramic chip can be directly connected with a variety of microprocessor via I2C.

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Features: Uses I2C interface (Qwiic-enabled): I2C Addresses: 0x76 (Default) or 0x77, 2x Qwiic Connectors; Operating voltage range: 1.71V - 3.6V, Typically 3.3V if using the Qwiic cable; Typical current consumption (varies based on mode and active sensor): 2.1 µA to 18mA, 0.15 µA (sleep mode), 3.9 mA in standard gas scan mode

Relative humidity: Operating range: 0% to 100%, Absolute Accuracy: ±3%RH, Resolution: ±0.008%RH; Temperature: Operating range: -40°C to +85 °C, Absolute Accuracy: ±1.0°C, Resolution: 0.01°C

Pressure: Operating range: 300hPa - 1100hPa, Absolute accuracy: ±60Pa (0°C to 65°C), Resolution: 0.18PA, highest oversampling; Gas: F1 score for H₂S scanning: 0.92, Standard scan speed: 10.8 sec/scan, Sensor-to-sensor deviation: ± 15% ± 15

✅【PARAMETER】Supply Voltage: 5V; Current Consumption: 0.6 mA; Measuring Temperature Range: -40 to +85°C; Measuring Pressure Range: 300-1100 hPa

✅【FUNCTION】Not only can measure pressure(Accuracy: ±1Pa), but also temperature(Accuracy: ±1°C)

✅【INTERFACE】It provides both I2C and SPI interfaces. To use SPI, simply de-solder the bonding pads on the back. If you go with I2C, the board also provides 2 I2C addresses for you to select as you want.

This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor.

Adopts 5K ohm resistor bridge sensor.

Pressure: 0-40KPa., Voltage: 3.3-5V. The specific air pressure value needs to be calculated

[Parameter]: Working voltage: 3.3V;Humidity 0%-100%;Air pressure 300-1100hPa (hPa);Temperature -40°C-85°C; Current consumption 1.8uA @1Hz humidity and temperature;2.8uA @1Hz pressure and temperature;3.6uA @1Hz humidity, pressure and temperature; 0.1uA in sleep mode

[Highlight]: Work with Adafruit BME280 library perfectly; If accuracy is a priority, don't waste time with DHTxx series; with BME280, you get incredibly accurate temperature and humidity and pressure, please keep the cable very short to get accurate readings (as in inches not feet); with a low altitude noise of 0.25m

[Interface]: Digital interface I2C (up to 3.4MHz) and SPI (3 and 4 wire, up to 10MHz); For simple easy wiring, go with I2C

The BME280 sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.

Our BME280 Sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy.

Supply Voltage: 1.8 - 5V DC Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz)

★Not only the pressure and the temperature, this sensor can measure humidity.

★Make sure to put SDO to high to get address 0x77. This will work with BME280 library perfectly.

★BME280 is a precision sensor, is soldered onto PCB. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

Temp Range: -40C to 85C - Humidity Range: 0 - 100% RH, =-3% from 20-80%

Pressure Range: 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa

Altitude Range: 0 to 30,000 ft (9.2 km), relative accuracy of 3.3 ft (1 m) at sea level, 6.6 (2 m) at 30,000 ft.

BMP280 3.3V Atmospheric Pressure Sensor Module is an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183.

The BMP280 is an absolute barometric pressure sensor especially designed for mobile.This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI.

This precision sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy.

BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices, to measure temperature, pressure, and altitude.

Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3μA

BMP180 uses a powerful 8-pin leadless ceramic chip can be directly connected with a variety of microprocessor via I2C.

Direct replacement - this barometric pressure sensor is designed to match the fit and function of the original sensor on specified vehicles

Ideal solution - this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction

Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life

This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor.

Pressure: 0-40KPa., Voltage: 3.3-5V. The specific air pressure value needs to be calculated

It can connect 2.5mm soft tube and detect the water level and other air pressure.

Pressure: 0-40KPa., Voltage: 3.3-5V. The specific air pressure value needs to be calculated

Voltage: 3.3-5V

Adopt 5K ohm resistor bridge sensor, and specific air pressure value needs calculating.

BMP280 is an upgraded version of the old BMP085/BMP180/BMP183 barometric sensor, it is an environmental sensor with temperature, barometric pressure sensor.

The BMP280 sensor is a precision sensor, is sealing-in PCB, measure the pressure and the temperature.

Temperature humidity sensor module is suit for all sorts of weather sensing and can even be used in both I2C and SPI.

The BMP280 sensor is a precision sensor, is soldered onto PCB, measure the pressure and the temperature.

It is an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183.

Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI.

The pressure sensor module adopts high precision AD sampling chip and 0-40KPa air pressure sensor

Liquid water level Ccontroller board can connect 2.5mm soft tube and detect the water level and other air pressure

3.3-5V digital barometric pressure sensor module adopt 5K ohm resistor bridge sensor, and specific air pressure value needs calculating by ourselves

This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor.

Adopts 5K ohm resistor bridge sensor

Pressure: 0-40KPa., Voltage: 3.3-5V. The specific air pressure value needs to be calculated

This environmental breakout comprises of SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 ultraviolet sensor. Support I2C and UART.

The reasonable layout and heat conduction of main chips are carefully considered in the circuit design, which effectively guarantees the accuracy of the data.

The product has an MCU processing chip onboard that converts the sensor raw data into values with the standard units so you can directly use them. For instance, ℃ and °F for temperature, % for humidity, Kpa for barometric pressure, lx for light illuminance, and mw/m² for UV light.

Air pressure sensor module pressure: 0-40KPa; Voltage: 3.3-5V the specific air pressure value needs to be calculated; Voltage: 3.3-5V

This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor, it can connect 2.5mm soft tube and detect the water level and other air pressure

Adopt 5K ohm resistor bridge sensor, and specific air pressure value needs calculating.

BMP388 indludes a new FIFO functionality. This greatly improves ease of use while helping to reduce power consumption of the overall device system during full operation. The integrated 512 byte FIFO buffer supports low power applications and prevents data loss in non-real-time systems.

The sensor is more accurate than its predecessor BMP280, covering a wide measurement range from 300 hPa to 1250 hPa. This new barometric pressure sensor exhibits an attractive price -performance ratio coupled with low power consumption.

Due to the built-in hardware synchronization of the pressure sensor data and its ability to synchronize data from extermal

💙for:Freightliner:2007-2008 Argosy ISX 15.0;2014-2017 Cascadia.ISX 15.0;2000-2002 Century Class,ISX 15.0;2007-2008 Columbia,ISX 15.0;2014 Columbia,ISX 15.0;2007-2008 Columbia 120,ISX;2014-2016 Coronado,ISX 15.0;2004 FLD 120,ISX 15.0;2006-2008 FLD 120,ISX 15.0;2006 FLD 120,ISX;2004 FLD 132,ISX 15.0;2007-2008 FLD120 SD,ISX 15.0;2007-2008 FLD120 SD,ISX;2007 FLD132,ISX 15.0;2014-2017 XC Modular Rail. ISX 15.0;2015-2017 XC Raised Rail,ISX 15.0;2004 5600,ISX;2006 5600,ISX;2004 5600,ISX-400;

💙for:Kenworth:2008 C500,ISX 15.0;2014-2016 C500,ISX 15.0;2008 T2000,ISX 15.0;2008 T660,ISX 15.0;2014-2017 T660,ISX 15.0;2014-2017 T680,ISX 15.0;2014-2015 T700,ISX 15.0;2003 T800,ISX 15.0;2008 T800,ISX 15.0;2014-2017 T800,ISX 15.0;2015-2017 T880,ISX 15.0;2003 W900,ISX 15.0;2008 W900,ISX 15.0;2014-2017 W900,ISX 15.0;KME:2008 Predator,ISX-500;Peterbilt,Spartan Motors:2015-2017 Gladiator.ISX 15.0;2016-2017 K2,ISX 15.0;2015-2017 K3,ISX 15.0;

💙for:Volvo:2003 VNL,ISX 15.0;2003 VN,ISX;2005 VN,ISX;2005 VN,ISX-450;2007-2008 VT,ISX;2007-2008 VNL,ISX 15.0;2007 VNM,ISX 15.0;2005 VT,ISX-475;2007-2008 VT,ISX-475;2007-2008 VN,ISX-450;2003 VN,ISX-475;2007-2008 VN,ISX-475;2003 VN,ISX-500;2005 VN,ISX-500;2005 VT,ISX-500;2007-2008 VN,ISX-500;2007-2009 VT,ISX-500;2008 VT,ISX-500;2003 VN,ISX-565;Western Star