Best Diitao in 2026

【Mini Submersible Pump】Rated voltage DC 3V or 4.5V,Current: 100-200mA.

【Tube size】length 4M,Inside Diameter=0.22""/5.54mm;Outside Diameter=0.32""/8.20mm.

【Quiet Design】Small motors will not produce too much noise.

VOLTAGE TEST RANGE --- DC 6.5~100V; Current test range: 0~20A; Power test range: 0~2KW; Energy test range: 0~9999kWh

MULTIFUNCTIONAL --- The accumulated energy can be reset by button,Store energy data when power off(can be reset to 0),Voltage alarm function (over voltage alarm threshold, backlight and voltage will flash to alarm)

4-IN-1 DC MULTIMETER --- Large-screen LCD (display voltage, current, active power, energy at the same time) with Backlight function

⛲⛲【Mini Submersible Pump】Rated voltage DC 3V or 4.5V,Current: 100-200mA.

⛲⛲【Tube size】length 4M,Inside Diameter=0.22""/5.54mm;Outside Diameter=0.32""/8.20mm.

⛲⛲【Quiet Design】Small motors will not produce too much noise.

Standard interface that can be controlled directly by microcontroller,With anti-reverse power function, power supply will not damage the module reverse.

Rated output load: 2A at 100 to 240VAC. (50/60Hz)（Can only control the AC load, can not control the DC load.)

Equip with high-current relay, AC250V 10A; DC30V 10A,Indication LED for Relay output status,5V 4 Channel Relay interface board, and each needs 15-20mA driver current

12V Relay output maximum contact is AC250V 10A and DC30V 10A. 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers. It is also able to control various appliances and other equipments with large current.

The shell of relays is made of flame retardant plastic material, wear resistant, high temperature resistant, dustproof and oil resistant. The internal structure adopts a high-efficiency spring structure and has a high life. High mechanical strength, reliable and stable.

8 relay output modules, relay output contacts up to 250A 10A. Input IN1, IN2, IN3, and IN4 IN5, IN6, IN7, and IN8. signal lines are active low. VCC, GND power input terminal, relay can be separately powered by relay power input terminal JD-VCC.

W1209 Temperature Controller Board --- The input voltage is DC12V, the output range is 1 10A relay, the refresh frequency is 0.5 seconds, the display type is 0.28 inch 3-digit digital tube

Precise Temperature Control ---Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.simple operation stable performance, high safety and reliability

Durable --- The temperature controller board features complete machine patch, wave soldering, stable performance and nice consistency; Embedded CPU chip, namely MCU, is more intelligent, consume lower power

【Automatic Light Sensor Switch】Built-in light sensor makes this switch automatically control ON/OFF of light, turn off the light at daytime while turn on at night

【Very Easy to Install】Just connect the red/black/white wires right and you can get the normal LED work as Auto sensing light.（Refer to the picture for wiring method）

【Solar Lights Waterproof Switch】Unbothered by the snowmelt or the above-average spring rain.With this switch, it will offer you maximum convenience at night and ensure less power consumption,we fully promise the quality of our products,please rest assured to buy our items

This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor.

Adopts 5K ohm resistor bridge sensor

Pressure: 0-40KPa., Voltage: 3.3-5V. The specific air pressure value needs to be calculated

Nano I/O EXPANSION SENSOR --- Lead out all digital IO ports and analog IO ports, each IO port has a standard positive and negative power supply interface Lead out the I2C interface on the main board to facilitate the connection with the I2C device

INCREASE THE DC POWER SUPPLY INTERFACE --- The power supply current of the USB interface on the NANO board is actually only 50MA, which is obviously insufficient when a device with a large current such as a steering gear is required. At this time, an external power supply is provided at the DC power supply interface to ensure the stable operation of the device.

8-PIN ANALOG OUTPUT --- with output power and GND,1 Servo power input, the barrel connecter input voltage range is 6-12 volts producing a stabilized 5v at 1A

1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10' cord length

1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter

SUPER HIGH-QUALITY PERFORMANCE: Our portable electric air pump uses a unique high pressure design for a faster inflatable experience, rated power is 250W and the Pressure is 1. 2PSI (8000 Pa), which make it fill inflatables faster than other air pumps.

INTERLOCKING NOZZLES: The air pump with extra long AC power cord length 1.6M/5.3ft and 3 nozzles -- S (0.24''), L (0.67'') -- can fit most inflatables you need to inflate or deflate; the portable pump's nozzles stay lock-secured without losing air.

EASY OPERATION: The high power air pump makes inflating and deflating quick and easy. Just attach the nozzle to the inflation or deflation port, attach it to your inflatable item, then press the switch to inflate or deflate.

HIGH-QUALITY PERFORMANCE: The electric air pump designs with Quick-fill and High Pressure, enable to deflate and inflate efficiently with rated power 130W and 0. 55 PSI (3800 Pa), higher than most hand pumps on the market

INTERLOCKING NOZZLES: The air pump with extra long AC power cord length 1.6M/5.3ft and 3 different sizes of nozzles --S (0.28''), M (0.68''), L (0.71'')--can fit most inflatables you need; the portable pump's nozzles stay lock-secured without losing air

COMPACT AND LIGHTWEIGHT: The air pump is convenient to pack and transport in a small size 4. 7 x 3. 7 x 4. 5 inches, even kids can easily use it

Specs & Dimensions: 4.1*2.6*3.5 inches; The 6.5 ft. long power cord offers convenient installation and an adjustable knob allows you to control of water flow rate and pressure; Max flow rate: 800 GPH (3000L/H); Max lift height: up to 10 ft.; Wattage: 24W; Voltage: 110-120V

Detachable & Cleanable: This powerful yet small-sized water pump is easy to hide and disguise; No tools necessary for disassembly and it’s very easy to clean

Many Possible Placement Positions: Place the pump flat on its base, stick it on an angled or vertical surface, and manually rotate it into any position you need

Rechargeable & Long-Lasting: This rechargeable pump offers high performance and long battery life. Enjoy up to 30 minutes of continuous use, and you can quickly charge the battery with the included 5V DC Type-C USB cable

Fast & Powerful: Quickly inflate air mattresses with an airflow rate of 370 L/min and a pressure rate of 0.6 psi / 4136 Pa, so you don’t have to wait long for a comfortable air mattress

Multiple Nozzles: The air pump includes small (0.27-inch), medium (0.35-inch), and large (0.69-inch) nozzles as well as a vacuum storage bag nozzle (1.3-inch)

Foam traps particles and debris for mechanical filtration; tailored fit prevents bypass

Provides biological filtration as friendly bacteria grow inside pore structure

Replacement media designed to fit the AquaClear 50 filter

LifeStride Soft System

Available in Medium and Wide Widths

LifeStride Soft System

Available in Medium and Wide Widths

FITTING TIPS: TRUE TO SIZE, WIDE WIDTH CUSTOMERS ORDER HALF SIZE UP.

Heel height: 5" (approx)

Platform height: 1.25" (Approx)

LifeStride Soft System

Available in Extended Sizes

LifeStride Soft System

Available in Medium and Wide Widths

LifeStride Soft System

Available in Medium and Wide Widths

Just Right Height 2 and 3/4 inch heel

Classic Pointed toe & Trendy Colors

Heel height: 3" (approx)

Platform height: 0.5" (approx)

LifeStride Soft System

Available in Medium and Wide Widths

Powerful Electric Air Pump -- The AGPtek air pumps are so powerful that it can not only inflate items but also deflate products by sucking air out! Car power adapter and home power adapter are included, making it possible for indoor and outdoor use. ( NOTE: This air pump is NOT rechargeable and NOT FOR BALLOONS!!!!!! )

3 Nozzles to Choose -- We have 3 nozzles of different size in the electric air mattress pumps – S, M and L, allowing you to inflate/deflate different items in any occasions! Tip: Not applicable to Intex Challenger K1!!

Easy to Use -- The inflatable mattress pump is compatible with 12V DC and 110 -120V AC power supply. To inflatable, just put the inflatable head at the filling hold, then press the switch. To deflate, you should put the inflatable head in the vent hole, then press the switch to deflate. Our electric air mattress pumps are simple to operate.

Classic Pointed toe & Trendy Colors

Heel height: 3" (approx)

Platform height: 0.5" (approx)

LifeStride Soft System

Available in Medium and Wide Widths

Soft System comfort package provides all-day support, flex, and cushioning

Classic Pointed toe & Trendy Colors

Heel height: 3" (approx)

Platform height: 0.5" (approx)

High rebound foam, heel cushion

Designed for stability and balance

Highly flexible outsole

Classic Pointed toe & Trendy Colors

Heel height: 3" (approx)

Platform height: 0.5" (approx)

LifeStride Soft System

Available in Medium and Wide Widths

Soft System comfort package provides all-day support, flex, and cushioning