Best Detroit Axle Bearings in 2026

Size: 6200-2RS (Inner Dia.=10mm, Outer Dia.=30mm, Thickness=9mm)

Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment

Made from Carbon Steel, durability and resistance to under heavy loads

6806-2RS (I.D.=30mm, O.D.=42mm, Thickness=7mm)

6806-2rs bearings are sealed on BOTH SIDES to keep lubricant in

Made from Chrome Steel (GCr15), durability and resistance to under heavy loads

Size: 6001-2RS (Inner Dia.=12mm, Outer Dia.=28mm, Thickness=8mm) (Marked with 6001RS on the seals)

Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment

Made from High Carbon Steel, durability and resistance to under heavy loads

Size: 6901-2RS (Inner Dia.=12mm, Outer Dia.=24mm, Thickness=6mm)

Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment

Made from Carbon Steel, durability and resistance to under heavy loads

[MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm); Washer Model: AS2035

[MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise

[FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only

Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree.

Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life.

Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity.

[SIZE] - Bore Diameter=12mm, Outer Diameter=21mm, Thickness=5mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 2.1kN; Static Load Rating (Cor): 2.6kN; Limiting Speed (Grease): 1800rpm, designed for low speed operation and axial loads only

Size: 608ZZ (Inner Dia.=8mm, Outer Dia.=22mm, Thickness=7mm)

Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation

Made from High Carbon Steel, durability and resistance to under heavy loads

Size: 695ZZ (Inner Dia.=5mm, Outer Dia.=13mm, Thickness=4mm)

Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation

Made from Carbon Steel, durability and resistance to under heavy loads

626-2RS (I.D.=6mm, O.D.=19mm, Thickness=6mm)

626rs bearings are sealed on BOTH SIDES to keep lubricant in

Chromium Steel long-life bearings, smooth and low noise

[SIZE] - Bore Diameter=17mm, Outer Diameter=30mm, Thickness=9mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Steel cage

[CAPABILITY] - Dynamic Load Rating (Cr): 10.8kN; Static Load Rating (Cor): 18.2kN; Limiting Speed (Grease): 6100rpm, designed for low speed operation and axial loads only

SIZE:KFL08 8mm Bore Diameter, Pillow Block Bearing Flange

FEATURES:This Bearing is a self-aligning, pillow block bearing

MATERIAL: Zinc Alloy Flanged Base, rust-proof, durable, have long Life

[SIZE] - Model: LM25UU, 25x40x59mm Metric Double Seal Linear Bearing

[USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways.

[FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter

Main Color: white; Material: POM, Metal

Package Content: 4 x Bearing Pulley

Product Name: Bearing Pulley

[SIZE] - Bore Diameter=5mm, Outer Diameter=10mm, Thickness=4mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 0.72kN; Static Load Rating (Cor): 0.79kN; Limiting Speed (Grease): 5100rpm, designed for low speed operation and axial loads only

Model: LM8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm)

Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side

Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength

Model: SCS8UU (Bearing No.: LMF8UU, Nominal Shaft Diamter (dr): 8mm)

Aluminium Alloy Linear Ball Bearing Slide Block Units

Light-weight housing and Chromium Steel bearing ball, good abrasion resistance, high precision and good strength

6810ZZ (I.D.=50mm, O.D.=65mm, Thickness=7mm)

6810zz bearings are Shielded on BOTH SIDES to keep lubricant in

Made from Chrome Steel (GCr15), durability and resistance to under heavy loads

Model: 07100S/07210X (Bore: 25.4mm / 1", Outer Diameter: 50.8mm / 2", Width: 15.011mm / 0.591")

Single row tapered roller bearings must be used either with a second bearing or as a matched pair

Components are separable and interchangeable that easy for maintenance

Thread Diameter: M8.

Features: 8mm Bore Self Lubricating Male Right Hand.

Install: Large load capability,easy mounting and dismounting and mechanism simplification. The bearing steel ball and the copper ring are locked and squeezed so that they will not fall off.

Type: 3/8" Bore x 3/8-24 right-hand male thread rod end. Maximum angular misalignment: 9 Degree.

Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life.

Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity.

[MODLE] - Bearing Model: TC1625 (I.D.=1", O.D.=1-9/16", Thickness=5/64"); Washer Model: TRA1625

[MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise

[FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only

605ZZ (I.D.=5mm, O.D.=14mm, Thickness=5mm)

605-2Z bearings are shielded on BOTH SIDES to keep lubricant in

Made from Carbon Steel, durability and resistance to under heavy loads

[SIZE] - Bore Diameter=10mm, Outer Diameter=18mm, Thickness=5.5mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 2.23kN; Static Load Rating (Cor): 2.721kN; Limiting Speed (Grease): 2500rpm, designed for low speed operation and axial loads only

Model: LM12UU (Nominal Shaft Diamter (dr): 12mm, Outer Diameter (D): 21mm, Total Length (L): 30mm)

Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side

Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength

Size - Bore Diameter: 8mm, Outside Diameter: 12mm, Total Length: 12mm, Flange Diameter: 16mm, Flange Thickness: 2mm

Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant.

Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft.

[SIZE] - Bore Diameter=8mm, Outer Diameter=22mm, Thickness=7mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 3.5kN; Static Load Rating (Cor): 3.85kN; Designed for low speed operation and axial loads only

Model: LMK10UU (Nominal Shaft Diamter (dr): 10mm, Outer Diameter (D): 19mm, Total Length (L): 55mm)

Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side

Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength

Size: 628ZZ (Inner Dia.=8mm, Outer Dia.=24mm, Thickness=8mm)

Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation

Made from Carbon Steel, features with good anti-rust and corrosion resistance

Model: 24780/24720 (Bore: 41.275mm / 1.625", Outer Diameter: 76.2mm / 3", Width: 23.02mm / 0.9063")

Single row tapered roller bearings must be used either with a second bearing or as a matched pair

Components are separable and interchangeable that easy for maintenance