Best 65 Inch Car Audio Subwoofers in 2026

Shallow Mount – With less than 3 inches mounting depth, this car subwoofer is ideal in sealed enclosure applications and makes for one of the most versatile subwoofers for cars in areas with limited space.

Deep Bass - Front and rear venting allows cooler air to be exchanged in the voice coil gap which helps the sub make deep bass and extend the life of the component.

Built to Last - Heavy gauge powder coated stamped steel basket provides a solid base for the motor system and moving parts and delivers big bass in a small space that does not consume your cargo space.

ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)

HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem

MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure

Cone - Made from Polypropylene, The CXX8 8 Inch Car Subwoofer Provides a Resilient and Durable Material That Can Offer Great Sound with The Advantage of a Long-Lasting Subwoofer

Surround - Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear

Stamped Basket - A stamped basket can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures.

CONE: Made From Polypropylene, The AC8D 8 Inch Car Subwoofer Provides a Resilient And Durable Material That Can Offer Great Sound With The Advantage Of Long Lasting Subwoofers

VOICE COIL: Our Voice Coils Are Able To Withstand High Temperatures Yet Maintain Its Strength And Fatigue Properties. Making Our Voice Coils With This Material, Gives Our Speakers The Advantage Of Longer Pay Times With Lower Weights

SURROUND: Foam is very flexible, providing the subwoofer with higher efficiency. This also translates to better excursion. (How far the cone of a speaker linearly travels from its resting position).

High-performance, 8-inch subwoofer for your boat, car, or ATV, with 250 watts of RMS power handling; Max power: 750 watts; Cut out diameter: 7.28 inches; Top mounting depth: 3.82 inches; Bottom mounting depth: 4.02 inches

Put heart-thumping bass in your vehicle by land or sea; IP56 marine rating makes this sub resistant to water, dirt, salt fog, UV, and humidity

Low profile design saves space needed for sub enclosures; Sealed box volume: 0.5 1.2 cubic feet; Ported box volume: 0.66 1.2 cubic feet

Sensitivity SPL (1W / 1m) 85 dB, Resonant Frequency 32 Hz

Polypropylene Cone, 2.5 Inch Voice Coil, Rubber Surround

Sealed Enclosure Internal Volume: 1.2 Cubic Feet, Ported Enclosure Internal Volume: 1.8 Cubic Feet

500 WATT POWER: This high powered audio projection woofer system has a maximum power output of 500-watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style

55-6 kHz FREQUENCY RESPONSE: This high-performance car woofer speaker has a frequency response of 55-6 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction

1.5” KAPTON VOICE COIL: This car speaker has 1.5” high-temperature Kapton voice coil, 89.2 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound

Quad enclosure for pairs of 8 inch mids and 3 inch tweeters

Manufacturer warranty: 1-year warranty

Includes a speakon terminal

Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.

Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer

Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable

350 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 350-watt peak power / 175 watt RMS so you can play your favorite tracks as loud as you want and with style

NON-FATIGUING RUBBER SUSPENSION: The high-performance car woofer speaker has a non-fatiguing rubber suspension along w/ bumped & vented motor structure that completes your woofer enclosure system. Features 3.50” mounting depth for easy installation

1.5” KAPTON VOICE COIL: This car speaker has 1.5” high-temperature Kapton voice coil, 89.2 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound

800 WATT POWER: This car subwoofer has 800 Watt peak power that will produce high sound resonance. It also has a frequency of 60Hz and 4 Ohm impedance

FOAM EDGE SUSPENSION: Made with a specially treated foam edge suspension to keep equipment safe. Designed with bump vented motor structure for durability easy installation. Comes with a plastic basket

NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time

Built-in Amplifier - A built-in 400 Max watt amplifier powers the 8” subwoofer

Passive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear

Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)

8-inch car subwoofer with RMS Power: 600 Watts RMS; Max Power: 1200 Watts MAX; Coil Configuration: Dual 2 Ohm Subwoofer

2.4 Inch - 4 Layer High-Temperature CCAW Voice Coil & Double Slug Y35 Grade Optimized Motor

Competition Mega Foam Surround & 4% Carbon Fiber Reinforced Cone

HIGH-POWERED CAR AUDIO: High-performance subwoofer adds a whole new dimension to your audio experience

INCREDIBLE PERFORMANCE: Features 8-inch quad stack composite cone with 2.5-inch 4-layer dual voice coil for incredible performance

CRISP AND CLEAR AUDIO: 150-ounce magnet achieves crisp and clear sound quality

Upgrade your audio with 300 watts of RMS power, total sonic accuracy, and IP56 marine protection; Power: 900 watts max, 300 watts RMS

Single voice coil carefully engineered for high-performance bass

Dynamic Balance technology gives your rich, clean, full-range sound

Space Saver - If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options

Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability

Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)

Infinity’s glass fiber woofer cones are lighter and stiffer with more cone-area than the competition , delivering increased low-frequency output and higher efficiency.

Edge-driven textile dome tweeters - These are not commonly used W-domes, but edge-driven textile dome speakers that will deliver broader and smoother high frequency response.

High output 2.5 ohm ohm architecture with low impedance voice coils enables the speaker to extract every watt from the amplifier and deliver peak power with ease.

300 WATTS MAX POWER: The max output of the 8-inch slim subwoofer is 400 watts. It allows you to crank up the bass volume to heighten the party atmosphere, making it an excellent complement to any car audio system

EXCELLENT DESIGNATION: We designed an 8-inch subwoofer with multi-color RGB lights and a remote control that is entirely waterproof and has a high strength engineering plastic basket for custom audio car, truck & mobile vehicle applications

AUDIO QUALITY: The waterproof subwoofer speaker features an high-temp aluminum. The 30 Oz. magnetic structure and 1.5'' -in voice coil with power and a dual 4 ohms impedance improve the sound system

Built-in Amplifier - A built-in 400 Max watt amplifier powers the 8” subwoofer

Passive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear

Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)

Model: SA-PGCE08LED | Dual 8 Inch 800 Watt Car Audio Subwoofer Box

Built-In Multi-Mode LED Lights Integrated with Plexiglass Front Window | Power Rating: 2 x 400 Watts Max Power

High Powered Dual 8 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish

400 WATTS POWER: With a maximum output of 400 watts, single series vented subwoofer helps you pump out some fantastic higher-powered bass volume to improve the party feel, making it a great addition to your truck audio system

30 OZ MAGNET STRUCTURE: The magnet construction of the single series vented subwoofer is 30 oz solid base. It's also quite simple to connect to your vehicle's sound system. For sound and music systems, a fantastic built-in single series subwoofer

8 INCH PAPER CONE: Our car stereo systems created this high powered 8-inch Woofers with a silver paper cone perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet

8-inch car subwoofer with RMS Power: 400 Watts RMS; Max Power: 800 Watts MAX; Coil Configuration: Dual 4 Ohm Subwoofer

2 Inch - 4 Layer High-Temperature Copper Voice Coil & Double Slug Y30 Grade Optimized Motor

Flexible High Foam Surround & 3% Carbon Fiber Reinforced Cone

8-inch car subwoofer with RMS Power: 400 Watts RMS; Max Power: 800 Watts MAX; Coil Configuration: Dual 2 Ohm Subwoofer

2 Inch - 4 Layer High-Temperature Copper Voice Coil & Double Slug Y30 Grade Optimized Motor

Flexible High Foam Surround & 3% Carbon Fiber Reinforced Cone

【Powerful Bass】Enjoy a powerful and deep bass sound in your car with our subwoofer. The 8-inch subwoofer delivers clear and accurate bass with the built-in amplifier, ensuring that you never miss a beat.

【Compact and Convenient】Our under-seat subwoofer is ultra-thin and designed to fit seamlessly under your car seat, saving you space and enhancing your audio experience. With a compact size and slim profile, you won't even know it's there.

【Plug and Play】The powered car subwoofer is easy to install, requiring minimal wiring and setup. You won't need to buy any additional amplifiers or equipment, as everything is built-in, making it a perfect solution for those who want to upgrade their car audio without the hassle.