Best 65 Inch Car Coaxial Speakers in 2026

240 WATT POWER: Pyle offers a pair of car speakers with a power of 120 Watt RMS to 240 Watt peak with 4 ohm impedance that will produce high-quality sound resonance. Play your favorite tracks as loud as you want and with style

4 INCH SPEAKERS: A clean-cut automotive speaker that boasts the size of 4.02” x 4.02” x 2.09” black high-quality poly injection speaker cone. Enhances car stereo by producing powerful audio sound. Also has 20oz high-density rubber magnet boot

1/2 INCH DOME TWEETERS: These speakers for the car are made entirely of massive butyl rubber surround for durability. The two-way coaxial speaker system introduces ½” neodymium film dome tweeter in each speaker that ensures low distortion

6 1/2" car speakers with 20mm silk dome tweeter delivers warm treble with remarkable clarity and definition

Polypropylene cone material is strong, yet lightweight for accurate mid and low tone

RMS power 80 watts per pair | Peak power 160 watts per pair

The PRV Audio 12MR2000 mid-bass woofer offers outstanding durability and is our most powerful midrange driver. This woofer is great for high power 2 or 3-way systems and produces excellent vocal support for stage monitors.

A specially designed spider suspension is assembled with a special resin improving the resistance against failure during intense use. The reinforced surround offers smooth accurate geometry during hard play.

The 12MR2000 offers a large 4” CCAW voice coil that will results in very high efficiency while providing smooth and accurate bass response.

Includes: (2) 6x9” speakers, (2) tweeters, (2) Crossovers, (2) Grills, Flush and surface Mounting accessories, Speaker wire.

Rockville RV69.2C 6x9 Component car speakers (pair). Peak Power Rating: 1000 Watts per Pair / 500 Watts Each. CEA Compliant RMS Rating: 220 Watts per Pair / 110 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids.

1.2” PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover.

KICKER 46CSS694 6x9" 900w Car Audio Component Speakers w/ 0.75" Tweeters CSS69. Fits nearly every car made. 12dB crossovers with a smaller footprint for easier installation. Three-position tweeter switch for dialing in your highs. EVC (Extended Voice Coil) technology help deliver remarkable bass response. Titanium tweeter construction and neodymium magnets to reveal subtle details

Sun Light Treated poly-foam surround assists with precise linear excursion. Phase plugs in the woofer cones eliminate any distortion. Steel mesh grilles protect your drivers. Three tweeter mounting options including flush, angled and surface pods. Dimension (L x W x H): 15.125 inch x 12 inch x 4.625 inch. Weight: 9 lbs. Woofer Size: 6x9 in. (160x230 mm). Tweeter Size: 3/4 in. (20 mm)

Dome Material: Titanium. Peak Power: 450 Watts per speaker / 900 Watts per pair. Continuous Power (RMS): 150 Watts per speaker / 300 Watts per pair. Effective Frequency Range: 30Hz - 21kHz. Woofer Mounting Hole Diameter: 5-5/8 x 8-7/16 in. (143x215 mm). Woofer Bottom Mount Depth: 3-3/16 in. (81 mm). Flush Mounting Tweeter Hole Diameter: 1-9/16 in. (40 mm)

6.5-inch two-way component speaker system with external crossover and 180 watts maximum power handling

Woofers feature ferrite magnet and proprietary Acudamp cone coating for clean, linear response and increased bass dynamics

1-inch soft dome tweeters with EVC technology and neodymium magnet; installation kit for flush and various surface angle mounts

Rockville RV69.2C 6x9 Component car speakers (pair). Peak Power Rating: 1000 Watts per Pair / 500 Watts Each. CEA Compliant RMS Rating: 220 Watts per Pair / 110 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids

Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover. Frequency response: 30-22,000 Hz. Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters

Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 3.35". Impedance: 4 Ohm. Grilles included. 1.2 Inch Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. Cotton spider material. Copper terminals. Cutout diameter: 8.58 x 5.83. Magnet: 27 Oz Y25 magnet

FLASHING SPEAKER: High-performance, 6.5-inch, speaker with LED lights that flash to the beat

MAX POWER: Features a max power of 250 watts and 125 watts RMS with a 4-Ohm impedance

VOICE COIL: Designed with a 15-ounce magnet and 1.2-inch Kapton voice coil for full, bumping sound

Timpano’s TPT-MD12 is a midbass loudspeaker designed for use in sealed enclosures, but would also work well in any system where high efficiency or high output is the goal

This driver has been painstakingly voiced to create a natural tone with low distortion at high levels

97 dB sensitivity and 375 watt power handling for tremendous output levels

TWEETER DOME MATERIAL: Neo-Mylar Soft Dome Tweeter Impact Resistant Tweeter Elements SURROUND: UV Resistant Rubber Surround Moisture Resistant Rubber Surround with high Mid-Bass Impact CONE: Silver Alpha-Cellulose Poly Cones Produces musical midrange and bass tones while remaining light weight SURROUND / CONE COUPLING: High Temperature Adhesive The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather

GASKET: Textured ABS Assures a ridged linear seal to the mounting surface TINSEL LEADS: Braided Highly conductive while remain flexible during high power applications VOICE COIL: Pure Copper Creates strong magnetic field with a very thin extrusion VOICE COIL FORMER: Kapton Lightweight and efficiently dissipates heat SPIDER: Epoxy infused Natural Fiber Natural fiber allows flexibility while the epoxy which gives strength during the manufacturing process.

COOLING SYSTEM: Over-Coil Air is exchanged over the voice coil through the spider CROSSOVER TYPE: Passive Butterworth Smooth transition of frequencies from midrange/midbass to the tweeter element CROSSOVER SPECIAL: 6dB Internal Integrated into the design to assure smooth midrange to tweeter frequency transitions FRAME: Anti-Resonant Stamped Steel Basket Very strong with minimal harmonics or distortions from flex or ringing

800 Watts continuous program power capacity

76 mm (3 in) copper voice coil

55 – 3000 Hz response

Package Includes: (1) Pair Crunch CS65C 6.5" Car Audio Component Speakers 300 Watts Max 6 1/2" Inch, (1) Pair Crunch CS653 6.5" Car Audio 3-Way Speakers 300 Watts Max 6 1/2" Inch

Features of CS65C: TWEETER DOME MATERIAL: Neo-Mylar Soft Dome Tweeter: Impact Resistant Tweeter Elements, SURROUND: UV Resistant Rubber Surround: Moisture Resistant Rubber Surround with high Mid-Bass Impact, CONE: Silver Alpha-Cellulose Poly Cones: Produces musical midrange and bass tones while remaining light weight, GASKET: Textured ABS: Assures a ridged linear seal to the mounting surface. TINSEL LEADS: Braided: Highly conductive while remain flexible.

SURROUND / CONE COUPLING: High Temperature Adhesive: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. VOICE COIL: Pure Copper: Creates strong magnetic field with a very thin extrusion, VOICE COIL FORMER: Kapton: Lightweight and efficiently dissipates heat, SPIDER: Epoxy infused Natural Fiber: Natural fiber allows flexibility while the epoxy which gives strength during the manufacturing process