Best Headlight Car Flashers in 2026

Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,FXC flasher can solve this shortcoming very well.

This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light.

Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights.

2 Year Warranty and Made in America

SAE J1113-11 Certified

Current Output: 20 Amps with 4 outputs at 5 Amps Each

This is a simple and practical blinking flasher module, the ON and the OFF duration can be adjusted separately. The blinking flasher module is suited for both resistive and slightly inductive loads. This blinking flasher module is ideally suited for driving for example LED lamps, hazard lights, warning signs, safety beacons, DC light bulbs, etc ....

Operating voltage DC 4.5 to 30V. Maximum current: 10 Amp. Maximum load 300 Watts/at DC 30V, 120 Watts/at DC 12V. (NOTE: this product no step-up, step-down or inverter function, only for DC load)

Time-ON 0.01 to 15 seconds and Time-OFF 0.01 to 15 seconds adjustable. The output ON - OFF - ON – OFF… cycle alternates.

ALERT EMERGENCY WARNING - Protect your vehicle by Increasing the visibility of yout car, truck, or motorcycle. Alarms everyone around you. Be noticeable, makes your light POWERFUL.

SOLID TOUGH CIRCUITS - Heavy Duty 72W Load (36w per channel) Auxiliary Daytime Running Wave lights compatible, 12v - 24v.

STANDOUT ON THE ROAD - Let your lights call others drivers attention! Alternating Light "Wig Wag" Flash Patterns.

Waterproof, epoxy-sealed design for durability and long life

Flange mount design with mounting screws included for easy installation

7 user-selectable flash patterns

«ALERT- EMERGENCY- WARNING» 150 Flash Per minute Increase the visibility of your vehicle, Alarms everyone arounds you.

«SOLID TOUGH CIRCUITS» Heavy Duty 72W Load (36w per channel) Daytime Running compatible, 12v - 24v

«STANDOUT ON THE ROAD» With the Fast Flashing Alternating Light "Wig Wag" Flash Patterns.

1 piece (Total length: 9 inches)

Input: 12V DC, Output: 12V DC

High wattage capacity: up to 4AMP, output (aka 48W)

«ALERT- EMERGENCY- WARNING» 250 Flash Per minute Increase the visibility of your vehicle, Alarms everyone arounds you.

«SOLID TOUGH CIRCUITS» Heavy Duty 240W Load (120w per channel) 12v - 24v

«STANDOUT ON THE ROAD» Fastest Alternating Light "Wig Wag" Flash Patterns, FAST FAST, VERY FAST!

2 or 4 headlight system on any vehicle with a 12 VDC negative ground system / Constant flash rate of 1.9 f.p.s. / External mounting flanges.

Not compatible with Dodge Dakota or Durango 1999 or newer

Power: 12V DC / Modulates high beams at 3.6 f.p.s. / Compact molded polycarbonate housing

BRAKE LIGHT BLINKER - Multi mode brake flasher device. Avoid rear end collisions.

VARIABLE FLASH RATE - Four flashes, flash rate is adjustable

EASY TO INSTALL - Connects to existing third brake light. 5 min install. 3 wires to connect.

BRAKE LIGHT BLINKER - Multi mode brake flasher device. Avoid rear end collisions.

ADJUSTABLE - User can change flash rate, cycles, flash effect and more

EASY TO INSTALL - Connects to existing third brake light. 5 min install. 3 wires to connect.

1.This product is suitable for most 12V motorcycles, such as Kawasaki, Honda, Suzuki, Yamaha, KTM.

2.This LED Electronic Flasher Relay Fix the LED Bulbs Related Turn Signal Light Hyper Flashing, not Function Properly issues.

3.Operating Voltage: 12V (11V-15V). Max Power: 42W. Switch Power: 0.02A to 12A. Working Temperature: -40°C to +80°C .Flashing Frequency: 50-200 times/min.

Features: 12 VDC, 90 FPM

Universal bracket, easy to install

Circuit switching: high side, reverse polarity protected

BRAKE LIGHT BLINKER - Multi mode brake flasher device. Avoid rear end collisions.

MULTIPLE MODES - 1 to 16 flashes. Fast or slow rates. Patented Timeout lock.

EASY TO INSTALL - Connects to existing third brake light. 5 min install. 3 wires to connect.

VW Dune Buggy Baja Bug

EMPI Quality

Compatible with Volkswagen Type 1 / Beetle 1968-70, Karmann Ghia 1968-70, Type-3 1968-70, Type-2 1968-70 and Thing 1973-74

🚖 Specifications: This flashlight relay adopts 2-pin design and fine workmanship. The operating voltage is 12V, the switching power is 0.02A to 12A, and the operating temperature is -40°C to +80°C.

🚖 Main Function: This 2-pin electronic LED flasher relay is suitable for most cars and motorcycles, and is used to solve the problem that the turn signal lights related to LED bulbs flicker and cannot work normally.

🚖 Adjustable Speed: You can adjust the flashing frequency of the LED flashing relay to achieve the speed you want. Clockwise means slow, counterclockwise means fast. Flashing frequency from 50 times per minute to 200 times per minute.

Easy to Use: It will only solve the LED bulb hyper flash problem.

This 5-pin EP27 electronic LED flasher relay operates at 12V.

High Quality: Made with high quality materials for maximum durability.

Automotive accessories, vehicle tools, automotive decoration.

Owners of the best choice, make your car more comfortable and safe.

If you have any questions, please contact us for your solution.

It Is Suitable To Solve The Hyper Flashing Associated With Fitting Led Indicator Bulbs.It Plugs Directly Into Your Box And Is A Direct Replacement For Your Existing Indicator Relay.

This Flasher Relay Will Solve LED Related Turn Signal Indicator Problems Such As Hyperflashing, Not Flashing, Or Just Replace A Failed Relay. It Can The Usage Of Load Resistor, And Directly Replace OEM 3-pin Flasher Relay And Operate With LED's Or Conventional Bulbs At Normal Flash Rate.

Flasher Relay Only, Other Accessories In The Picture Is Not Included!