Best Led Car Flashers in 2026

Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,FXC flasher can solve this shortcoming very well.

This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light.

Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights.

2 pin CF12 12V LED Flasher Relay. Suitable for motorcycle or scooter use to prevent turn signal hyper flashing

Eliminates the need for load resistors, turn signals will flash at normal rate with or without LED bulbs

Switch Current:0.02A - 10A

2 Year Warranty and Made in America

SAE J1113-11 Certified

Current Output: 20 Amps with 4 outputs at 5 Amps Each

20mA to 15 Amps

4 Terminals / Square Plastic

11 To 15 Volts D. C

3-pin CF13 EP34 Electronic LED flasher relay fix for LED bulbs

Replace stock relay in fuse box to fix hyper flashing turn signal light issue

Turn knob to adjust flashing speed from slow to fast according to the LED bulb load

Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,This flasher can solve this shortcoming very well.

This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When flashing is completed, stay in the original steady light.

Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights.

This is a simple and practical blinking flasher module, the ON and the OFF duration can be adjusted separately. The blinking flasher module is suited for both resistive and slightly inductive loads. This blinking flasher module is ideally suited for driving for example LED lamps, hazard lights, warning signs, safety beacons, DC light bulbs, etc ....

Operating voltage DC 4.5 to 30V. Maximum current: 10 Amp. Maximum load 300 Watts/at DC 30V, 120 Watts/at DC 12V. (NOTE: this product no step-up, step-down or inverter function, only for DC load)

Time-ON 0.01 to 15 seconds and Time-OFF 0.01 to 15 seconds adjustable. The output ON - OFF - ON – OFF… cycle alternates.

★ Our flash strobe controller can improve traffic safety warning to avoid rear-end accident.

★ When driving clogged at night,continued brakes produce visual fatigue,EFORCAR flasher can solve this shortcoming very well.

★ When braking:the high brake light will fast-blinking 4 times continuously,slow-blinking 4 times and then turn to long-lit.

UNIVERSAL — 2-pin flasher relay for most Honda, Kawasaki, Yamaha motorcycles

ADJUSTABLE — Easily change blinker rate from 1 - 3 per second

RELIABLE — Solid state LED relay with no moving parts (does not click)

ALERT EMERGENCY WARNING - Protect your vehicle by Increasing the visibility of yout car, truck, or motorcycle. Alarms everyone around you. Be noticeable, makes your light POWERFUL.

SOLID TOUGH CIRCUITS - Heavy Duty 72W Load (36w per channel) Auxiliary Daytime Running Wave lights compatible, 12v - 24v.

STANDOUT ON THE ROAD - Let your lights call others drivers attention! Alternating Light "Wig Wag" Flash Patterns.

ღ Application-This flasher is mainly used for left and right turn signals of Car Motorcycle Electromobile. Make them flash light to attract the attention of the cars behind to prevent traffic accidents.

ღ Solid state LED relay with no moving parts (does not click),Body dimensions of 1.4” x 1.3” x 0.98” (36mm x 34mm x 25mm)

ღ Rated current: 10A,Rated 400 hours continuous use

Waterproof, epoxy-sealed design for durability and long life

Flange mount design with mounting screws included for easy installation

7 user-selectable flash patterns

This is a heavy duty 2 pin 12V electric signal flasher (blinker) relay that is a plug and play design. No extra wiring or modifications are required to use this flasher.Completely waterproof design, Directly replace the OEM two-wire flasher.

Our led flasher relay retain the reliability of an flasher along with staying extra cool, consuming very little power and extra long lasting life.

Our 2 pin 12 volt round led flasher relay work for Most Automotive/Motorcycle/Bike to fix the rapid flashing turn signal or prevent weak or no flashing blinking issues.

1 Piece 3-pin CF13 Electronic LED flasher relay

Compatible with various of vehicles. Such as Acura or BMW or Cadillac or Dodge or Ford 1971-2005

Dimensions: 1.2" x 1.2" x 1.2". Please check the size before purchasing

DISCLAIMER: For show/off-road use only. This device may not be legal for street use. Please check with Federal Laws and/or regulations in you state, county, and/or municipality regarding installation and use of this product.

WHAT IT DOES: The United Pacific Brake Attention Module permits the brake light to momentarily flash rapidly prior to becoming fully lit. The speed and duration of the flash can be individually controlled by the module. The module can only be connected to the LED brake lights or the third brake light.

INSTALLATION: Included along with the Brake Attention Module, is our easy hookup instruction. Installation at the brake light switch, the module will operate both rear tail lights. 12V

Product Specifications: the flasher relay for LED turn signal is designed with 2 pins, with nice workmanship; Operating voltage is 12V, switch power is 0.02A to 12A, max power is 21W, working temperature is from -40 degrees Celsius to +80 degrees Celsius

Easy to Install: the turn signal relay is plug and play, convenient to install, saving your time and effort; Please correct the pin position during installation, if the pin position is wrong, the flash function will not be realized

Adjustable Speed: you can adjust the flashing frequency of the LED flasher relay to achieve the speed you want, the clockwise direction means slow, and the counterclockwise direction means fast; The flashing frequency is from 50 times per minute to 200 times per minute

«ALERT- EMERGENCY- WARNING» 250 Flash Per minute Increase the visibility of your vehicle, Alarms everyone arounds you.

«SOLID TOUGH CIRCUITS» Heavy Duty 240W Load (120w per channel) 12v - 24v

«STANDOUT ON THE ROAD» Fastest Alternating Light "Wig Wag" Flash Patterns, FAST FAST, VERY FAST!

12V 24V Flasher Relay: This is a superfine quality LED flasher relay universal for 12V 24V automobiles and motorcycles; The flashing frequency of the turn signal light bulb allows to be adjusted

Practical and Durable: The LED flasher blinker is helpful in solving problems related to turn signal LED light, such as rapid flashing, no flashing or burnt out; Made of ABS plastic material, durable for long time use

Stable Performance: This LED flasher relay adopts advanced SMD technology, features short circuit automatic protection, overload automatic protection, and reverse connection automatic protection to guarantee the bulb's stable work

Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights

Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.Enjoy 1 year quality warranty under regular use.

This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light.

【Flasher Relay for LED Turn Signal】ZSSElec 12 volt waterproof blinker relay used for most automotive,motorcycle,vehicle,bike to fix the LED bulbs related turn signal light hyper flashing.

【Safety】ZSSElec electronic turn signal flasher relay using advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, and reverse connection automatic protection, which can make the bulb work more stably. (without beep).

【High Quality】12volt 2 prong motorcycle flasher relay made of high quality plastic,working temperature is from -40 degrees Celsius to +80 degrees Celsius.

Compatible: Superfine quality LED Flasher Relay universal for 12V 24V automobiles and motorcycles. Flashing frequency of the turn signal light bulb allows to be adjusted.

Features: LED Flasher Relay with advanced SMD technology, with short circuit automatic protection, overload automatic protection, reverse connection automatic protection to guarantee the bulb's stable work.

Function: Turn Signal Light Flasher is helpful in solving problems related to turn signal LED light, such as rapid flashing, no flashing or burnt out.

【SPEED ADJUSTABLE】This LED Electronic Flasher Relay fixes motorcycle turn signal hyper flash, allows LED light to blink at the normal rate. Help upgrade the old signal bulb to LED bulbs.

【UPGRADED DESIGN】You can adjust this LED turn signal flash relay directly by hand, without any auxiliary tools. More Convenient and easier to get your flash speed. anticlockwise to turn faster, clockwise to turn slower.

【FITMENTS】These Adjustable 12V Relays are 2 pin universal, compatible with most 12V motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and other types of motorbikes or vehicles.

It can solve LED related turn signal problems such as rapid flashing, not flashing, hyper flashing, or bulb burnt out warning on dashboard.

3 Pin Flasher Relay for Led Turn Signal Fits for most Motorcycles such as BMW, for Chevrolet, for Dodge, Eagle, Ford, Geo, GMC, Hyundai, Jaguar, Mercury, Merkur, Mitsubishi, Oldsmobile, Peugeot, Pontiac, for Porsche, Saab, Saturn, Sterling, Volkswagen and Volvo vehicles etc

3 Pin Flasher Relay for Led Turn Signal Dimensions: 30 x 30 x 30mm/1.2" x 1.2" x 1.2" (L*W*H)

💡 IMPORTANT: Please check the dimensions and the direction of the POSITIVE and NEGATIVE poles of your old relay carefully before ordering. If you're unsure about the compatibility, contact us and we can help you confirm if it fits or not.

✅ WHAT YOU GET: 2 x CF13 EP34 3 Pin LED Electronic Flasher Relay (ONLY RELAY) Model name: CF13JL-02 (3 Terminals). Dimensions: Length: 1.18inch (3cm) × Width: 1.18inch (3cm) × Height: 1.18inch (3cm). Note: This is the No Speed Adjustment version. Please check the direction of the POSITIVE and NEGATIVE poles carefully to avoid buying the incorrect product.

✅ SPECIFICATIONS: Operating Voltage: 12V (11V-15V); Frequency: 90 Times/Min; Switch Power: 0.02A to 20A.Operating Temperature: -40°C to +80°C. This 3 Pin CF13 EP34 12V Flasher Relay can fix the problems such as the turn signal and hazard warn hyper flash, don’t blink, or bulb burnt out warning on the dashboard

【LED Flasher Relay Replacement】 Replace the relay in fuse box to fix hyper flashing issue for motorcycle and car turn signal / brake / tail lights with LED ones

【Speed Adjustable Function】 Turn knob enables to adjust the turn signal flashing speed from slow to fast according to the LED load

【LED Turn Signal Relay Specs】 Voltage: 12V; Wattage: 0.1W-150W; Switch Current: 0.01A-12.5A; Size: Approx. 5.1 x 3 x 3cm / 2'' x 1.2'' x 1.2''

Package Content: 4pcs flahers strobe controllers moduel for led brake light tail stop light.

Working Voltage: DC 12v-24v suitable for all motor vehicles motorcycle electric bicycle or led bulbs installed with the third brake lights. Connection black wire for negative pole and red wire for positive pole.

2 Flash Functions: when braking, the brake light flash module can first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original steady light when flashing is completed, which can warn your following drivers when you stop with a catchy blinking light.

💡 IMPORTANT: Please check the dimensions and the direction of the POSITIVE and NEGATIVE poles of your old relay carefully before ordering. If you're unsure about the compatibility, contact us and we can help you confirm if it fits or not.

✅ WHAT YOU GET: 1 x CF14 EP35 3 Pin 12V LED Adjustable Electronic Flasher Relay. Model name: CF14JL-02 (3 Terminals). Dimensions: Length: 1.20inch (3cm) × Width: 1.2inch (3cm) × Height: 1.2 inch (3cm). Note: This is the version that can Speed Adjustment. Clockwise: FASTER, Counter Clockwise: SLOWER. Please check the direction of the POSITIVE and NEGATIVE poles carefully to avoid buying the incorrect product.

✅ SPECIFICATIONS: Operating Voltage: 12V (11V-15V); Wattage:0.1W - 150W; Switch Power: 0.02A to 20A.Operating Temperature: -40°C to +80°C. This 3 Pin CF14 EP35 12V LED Flasher Relay can fix the problems such as the turn signal and hazard warn hyper flash, don’t blink, or bulb burnt out warning on the dashboard after installing SMD LED light bulbs

2 Pin 12V LED Flasher Relay--Suitable for motorcycle or scooter use to prevent turn signal hyper flashing, solid state LED relay with no moving parts

Versatile LED Turn Signal Relay--Can handle 0.1W - 150W ordinary bulb or LED light — fixes hyper flashing

Size-- Body dimensions of 1.5” x 1.4” x 1.25”

Package included: 1 piece 8-Pin blining flashing speed adjustable LM449 CF-18 flasher, Part # 81980-50030, 81980-53010, 81980-02030, 81980-34020, 066500-4650

Produce no heat compare with those load resistors and flashing speed adjustable

Compatible with Lexus CT IS GS ES LS RX LX, Scion FR-S xA xB, Toyota Camry Corolla Echo FJ Cruiser Prius RAV4 Sequoia Tundra Tacoma Sienna 86 BRZ Crosstrek Forester Impreza WRX STI Legacy

1.This product is suitable for most 12V motorcycles, such as Kawasaki, Honda, Suzuki, Yamaha, KTM.

2.This LED Electronic Flasher Relay Fix the LED Bulbs Related Turn Signal Light Hyper Flashing, not Function Properly issues.

3.Operating Voltage: 12V (11V-15V). Max Power: 42W. Switch Power: 0.02A to 12A. Working Temperature: -40°C to +80°C .Flashing Frequency: 50-200 times/min.