Best 4 X 6 Inch Car Speakers in 2026

The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVC (Extended Voice Coil) for even deeper lows.

By drastically reducing the mounting depth, CS-Series Coaxial and Three-Way Speakers will fit in nearly every make and model of vehicle on the road today.

The perfect upgrade from your factory sound, a stamped-steel framework supports a rigid polypropylene cone and zero-protrusion PEI tweeters.

Power Handling: 70W RMS, 105W peak

Sensitivity (@ 2.83V): 91dB

Impedance (ohms): 3

Country of origin :Switzerland

Package dimensions :2.0" L x5.0" W x2.0" H

Package quantity :1

Peak power handling : 150 watts per pair (75 watts each)

Microfiber paper cone & butyl rubber surround

20Mm soft dome silk tweeter

Sold as 1 each

30W nominal

Impp with MICA composite cone woofers

Product 1: TRIAXIAL SPEAKER SYSTEMS: The woofer feature an eye-catching blue poly injection cone for plenty of stiffness without added weight The 1-inch ASV voice coil is ready for high-temperature, high-wattage situations

Product 1: LOW IMPEDANCE: Pyle 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars It also make the most of every 240 watt your car stereo can deliver

Product 1: MIDRANGE TWEETER: Pyle Pro three way sound speaker system has one-inch neodymium film dome midrange and 3/4-inch piezo tweeter that complete the package It helps to provide smooth, loud and detailed sound in each pair

Mounting Depth: 3.2 inches, Mounting Hole: 8.9 x 6 inches

Item Weight: 5.4 pounds (pair)

Frequency response: 50Hz to 20khz

180W RMS AND 360W PEAK: This 6” x 5” car speaker can provide up to 180 watts RMS or 360 watts peak power because it is a 20 oz magnet structure. A pair of 6” x 5” 180-watt speakers - carrying both the high and low end for a fuller range sound.Impedance: 1 ohm.Speaker size:6.5 inches

TRIAXIAL SPEAKER SYSTEMS: The 6.5-inch woofer features an eye-catching blue poly injection cone for plenty of stiffness without added weight. The 1-inch ASV voice coil is ready for high-temperature, high-wattage situations

LOW IMPEDANCE: Pyle 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars. It also makes the most of every 360 watts your car stereo can deliver. Includes grills, wires and mounting hardware

240 WATT POWER: Pyle offers a pair of car speakers with a power of 120 Watt RMS to 240 Watt peak with 4 ohm impedance that will produce high-quality sound resonance. Play your favorite tracks as loud as you want and with style

4 INCH SPEAKERS: A clean-cut automotive speaker that boasts the size of 4.02” x 4.02” x 2.09” black high-quality poly injection speaker cone. Enhances car stereo by producing powerful audio sound. Also has 20oz high-density rubber magnet boot

1/2 INCH DOME TWEETERS: These speakers for the car are made entirely of massive butyl rubber surround for durability. The two-way coaxial speaker system introduces ½” neodymium film dome tweeter in each speaker that ensures low distortion

Product 1: 80Hz - 20Khz FREQUENCY RESPONSE: Pyle, 5” x 7” three way sound speaker system has a 20 oz magnet structure, 1'' neodymium film dome midrange and frequency response. This car speaker is pack with exceptional 90dB (1w/1m) decibel sensitivity

Product 1: 4-OHM IMPEDANCE: This car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. The blue poly injection cone also looks great and allows your music to resonate with full power

Product 1: 1'' ASV VOICE COIL: Pyle car sound speaker system is capable of 1'' high-temperature ASV voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures

Coaxial speak pair with 4 ohms of impedance

250 watts max power; 30 watts RMS power

Woofer features 6 x 8 inch paper cone construction

Package Dimensions: 9.398 cms (L) x 19.05 cms (W) x 9.398 cms (H)

Product Type: Speakers

Package Quantity: 1

Standard 4''x6'' Size Fits OEM Locations - High Temperature Aluminum Voice Coil - Power Handling: 90 Watts RMS /180 Watts Peak

Yellow Color Poly Injected Cone - Strong Capacitor for Excellent Performance - Frequency Response: 70-20KHz

Non-Fatiguing Butyl Rubber Surround - Yellow Coated Steel Basket - Impedance: 4 Ohms

Pair Rockville MS525W 5.25" 400 Watt Waterproof Marine Boat Speakers 2-Way White.

Peak Power: 400 Watts per pair / 200 Watts each. RMS Power: 200 Watts per pair / 100 Watts each.

Injection Molded Polypropylene Cone. Aluminum voice coil with ASV winding. Cloth surrounds. Impedance: 4 Ohm.

Glossy black poly-injection cone

Aluminized Mylar tweeters

Aluminum voice coil former

4 x Car Audio 6.5-inch 2-way Coaxial Speakers

RMS Power Handling: 80 watts per pair / 40 watts each | PEAK Power Handling: 600 watts per pair / 300 watts each

Impedance: 4-ohms

Price is for (2) Pairs of MB Quart FKB168 6x8" 200 Watt Car Stereo Coaxial Speakers. Pair MB Quart FKB168 6x8" 200 Watt Coaxial Car Speakers. RMS Power Handling: 50 Watts (Per Speaker) / 100 Watts (Per Pair). Peak Power Handling: 100 Watts (Per Speaker) / 200 Watts (Per Pair). Speaker Impedance: 4 Ohms. Frequency Response: 46 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 6 kHz.

Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability. Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat.

Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response. Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface.

6 x 9-Inch 450W 4-Way Coaxial Car Audio Speaker

Made of the highest technical quality to ensure maximum reliability and durability

High-quality polypropylene woofer cone, a butyl rubber surround with Mylar dome tweeter, and ceramic magnet

SPEAKER PACK: Pack includes (2) 2-way 6x8, 5x7 inches oval coaxial full range speakers

125 WATTS: 125 watts of RMS power handling and 250 watts of peak power handling; 6 dB internal crossover special; 4 ohms; Frequency response: 3 10 dB; Sensitivity: 88 dB; Crossover point: 4k Hz; Crossover slope: 12 dB

DOME TWEETERS: Neo mylar soft dome tweeters and silver alpha cellulose poly cones; 1 inch tweeter provides clear highs and handles plenty of power; High temperature adhesive cone/ surround connection keeps cone and surround together; Passive butterworth crossover transitions from midrange/midbass to the tweeter seamlessly

SPEAKER PAIR: Pack includes (2) Hifonics Zeus Car Audio Coaxial Speakers

WATTAGE: Maximum power: 800 watts; RMS power handling: 120 watts

DOME TWEETER: Tweeter dome is made out of soft neo mylar, making it resistant to impact; Cones are made from alpha cellulose, a lightweight material that helps create rigid deep bass sound; Tweeter size: 1 inch; Speaker impedance: 4 ohm; Frequency response: 46 Hz; Sensitivity: 88 dB; Crossover point: 1K Hz + 3K; Crossover slope: 12 dB

210 W Max Power (30 W Nominal)

11mm polyethylene terephthalate (PET) hard dome tweeter

1-5/8" cellulose fiber cone midrange

SOLD AS PAIR | UPGRADE YOUR CAR SPEAKERS | Looking for better than average car speakers? Look no further than these high-end car speakers to replace your factory speakers! These Massive Audio car speakers have a mounting depth of 2.4 inches and diameter of 5.65 inches.The UV protected low mass woven fiber cone bounces on a High Quality Polyester Spider producing 93dB sensitivity and is bonded to a surround of soft flexible Butyl rubber assuring smooth, fast, hard hitting sonic playback.

SUPERIOR SOUND | These Car Audio Component Speakers will rival high end components for a fraction of the cost period! 12dB Linkwitz–Riley X Over blends highs and lows together with a balance not obtained by its competition. Rated at 150 Watts RMS / 300 Watts MAX / @ 4 Ohm, 93dB, 50Hz - 20KHz, Fully Isolated Tinsel Leads to Eliminate Crosstalk, High Quality Cloth Spider With Polyester Fiber, and 25mm Silk Diaphragm Tweeter With Ferro Fluid.

GUARANTEED TO LAST | Are you frustrated with factory car door speakers that crackle and those from other brands that blow out over time? These heavy duty, high end car speakers are guaranteed to last! Built with Woven Fibre Paper Cones with Butyl Rubber Surround, Custom Designed Pole Piece for Low Distortion and Sound Quality, Heavy Gauge Steel Basket with Thick Powder Coating, High Quality Cloth Spiders with Polyester Fiber and Custom Made Massive Logo 2 Way Tweeter Plates

KICKER 46CSS694 6x9" 900w Car Audio Component Speakers w/ 0.75" Tweeters CSS69. Fits nearly every car made. 12dB crossovers with a smaller footprint for easier installation. Three-position tweeter switch for dialing in your highs. EVC (Extended Voice Coil) technology help deliver remarkable bass response. Titanium tweeter construction and neodymium magnets to reveal subtle details

Sun Light Treated poly-foam surround assists with precise linear excursion. Phase plugs in the woofer cones eliminate any distortion. Steel mesh grilles protect your drivers. Three tweeter mounting options including flush, angled and surface pods. Dimension (L x W x H): 15.125 inch x 12 inch x 4.625 inch. Weight: 9 lbs. Woofer Size: 6x9 in. (160x230 mm). Tweeter Size: 3/4 in. (20 mm)

Dome Material: Titanium. Peak Power: 450 Watts per speaker / 900 Watts per pair. Continuous Power (RMS): 150 Watts per speaker / 300 Watts per pair. Effective Frequency Range: 30Hz - 21kHz. Woofer Mounting Hole Diameter: 5-5/8 x 8-7/16 in. (143x215 mm). Woofer Bottom Mount Depth: 3-3/16 in. (81 mm). Flush Mounting Tweeter Hole Diameter: 1-9/16 in. (40 mm)

100 WATT - 200 WATT POWER: Lanzar offers a pair of car speakers with a power of 100 Watt RMS to 200 Watt peak that will produce high-quality sound resonance. This also comes with silver push-in terminals and dual 4 Ohm impedance

5 x 7 / 6 x 8 INCH SPEAKERS: A clean-cut automotive speaker that boasts the size of 5” x 7”/6” x 8” black high-quality treated-coat paper speaker cones. Enhances car stereo by producing powerful audio sound. Also has 20oz high-density rubber magnet boot

1” PEI SILK DOME TWEETERS: These speakers for the car are made entirely of massive butyl rubber surround for durability. The 2-way speaker is designed w/ a non-fatiguing rubber suspension to keep equipment safe. Introduces 1” PEI neo silk dome tweeters

Upgrade Your Speakers - Direct Factory Replacement

4 Ohm Impedance

Frequency Response: 66-20kHz

4 x Car Marine/ATV/UTV 6 x 9-inch Mobile Monitor Series 3-Way Coaxial Speakers with Ultra Marine Certification

RMS: 300 watts per set / 150 watts each side | Peak: 900 watts per set / 450 watts each side

Recommended power range: 5 - 150 watts RMS per channel

Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers. Fits nearly every car made. Zero-protrusion tweeters to fit nearly any factory depth. Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion

UV-treated poly-foam surround resists heat or direct sunlight. Large woofer magnet in a heavy-duty motor for ultra-clean bass. PEI-tweeter construction provides superb clarity. Neodymium tweeter magnets allow for increased volume in high frequencies

Steel mesh grilles included for speaker protection. Dimension (L x W x H): 14.5 inch x 7 inch x 3.25 inch. Weight: 5 lbs. Speaker Design: 2 - way. Woofer Size: 6 1/4 in. (160 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohm. Peak Power: 300 Watts. Continuous Power (RMS): 100 Watts

Midrange speaker gives your car quality audio for a better listening experience, delivering an amazing soundscape

Integrates well into car audio setups, helping you achieve the audio suite you've always wanted

Each unit features a 66-millimeter and 30-millimeter midrange speaker, giving you plenty of audio range

Package Includes: (1) Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers, (1) Pair KICKER 46CSC464 4x6" 300 Watt 4-Ohm 2-Way Car Audio Coaxial Speakers CSC464

Features of 46CSC654: Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers, Fits nearly every car made, Zero-protrusion tweeters to fit nearly any factory depth, Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion,sunlight-treated poly-foam surround resists heat or direct sunlight

Large woofer magnet in a heavy-duty motor for ultra-clean bass, PEI-tweeter construction provides superb clarity, Neodymium tweeter magnets allow for increased volume in high frequencies, Steel mesh grilles included for speaker protection, Dimension (L x W x H): 14.5 inch x 7 inch x 3.25 inch, Weight: 5 lbs

Product 1: 6.5” Mid Bass Speakers: The 6.5 inch woofer features an eye catching yellow color poly injection cone; Non fatiguing butyl rubber surround keeps your speakers secure and ensures that the product will last for a long period of time

Product 1: High Quality Sound: Listening to good music while on the road has never been this good; The component audio speaker has high temperature ASV voice coil which provides the richest sound, ensuring low distortion and providing an open sound stage

Product 1: Heavy Duty Component:The 40 oz magnet structure, special electroplated steel basket, and 0.5” silk dome tweeter are what power these speakers and allow for a 90 Hz to 20 kHz frequency response; It features Standard 6.5” size that fits OEM locations