Best 30 Car Subwoofers in 2026

Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami

Frequency Response: 35Hz - 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.

Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz - 160Hz).

Dimensions: 11 x 11 x 4 inches

Impedance: 4 ohms

Mounting Depth: 4.6 inches, Mounting Hole: 9.2 inches

Dimensions: 11 x 11 x 5.3 inches

Impedance: 4 ohms

Mounting Depth: 4.8 inches, Mounting Hole: 9.1 inches

Shallow Mount – With less than 3 inches mounting depth, this car subwoofer is ideal in sealed enclosure applications and makes for one of the most versatile subwoofers for cars in areas with limited space.

Deep Bass - Front and rear venting allows cooler air to be exchanged in the voice coil gap which helps the sub make deep bass and extend the life of the component.

Built to Last - Heavy gauge powder coated stamped steel basket provides a solid base for the motor system and moving parts and delivers big bass in a small space that does not consume your cargo space.

10" dual 2-ohm car subwoofer with RMS Power: 650 Watts RMS; Max Power: 1300 Watts MAX; Coil Configuration: Dual 2 Ohm

2.5 Inch - 4 Layer High-Temperature Copper Voice Coil & Double Slug Y30 Grade Optimized Motor

Flexible High Foam Surround & 3% Carbon Fiber Reinforced Cone

COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a complete 8 gauge amp installation wiring kit

CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; Boasts 1200 watts max power and 400 watts RMS; Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil

SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches

Built-in Amplifier - Pulse Width Modulated design simplifies power supplies. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. It’s efficient & reliable

KIT – 17’/8G red power cable, 40 amp fuse holder, 3’/8G ground cable, 16’/18G blue remote cable, 16’ RCA interconnect, 4" wire ties, plastic grommets, #10 gold-plated ring terminals, butt splice wire connectors, tap screw, rubber terminal boot

Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)

600 WATT POWER: This high powered audio projection woofer system has a maximum power output of 600-watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style

50Hz - 5kHz FREQUENCY RESPONSE: This high-performance car woofer speaker has a frequency response of 50Hz - 5kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction

1.5” KAPTON VOICE COIL: This car speaker has a 1.5” high-temperature Kapton voice coil, 89.2 dB SPL, and an 8-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound

1000 WATT POWER: This 10-inch car subwoofer has a power of 500 Watt RMS to 1000 Watt peak that will produce high sound resonance. It also has silver-plated speaker terminals that will maximize sound quality while minimizing noise and distortion

70 OZ MAGNET STRUCTURE: Built with 70 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity

2” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 2” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air

Fully functional and easy to debug

68 mm Slim fuselage, installed under the seat, the effect is better

10 inch woofer speaker

10-inch high-performance subwoofer for your boat, car, or ATV, with 350 watts of RMS power handling; Max power: 1050 watts

Put heart-thumping bass in your vehicle by land or sea; Cut out diameter: 9.05 inches; Mounting depth (top): 4.33 inches; Mounting depth (bottom): 4.57 inches

Low profile design saves space needed for sub enclosures; Sealed box volume: 1 2.4 cubic feet; Ported box volume: 1.25 1.75 cubic feet

HIGH-POWERED CAR AUDIO: High-performance subwoofer adds a whole new dimension to your audio experience

OFFERS INREDIBLE SOUND: Features 2.5-inch BASV voice coil for incredible sound performance

CRISP AND CLEAR AUDIO: 100-ounce magnet achieves crisp and clear sound quality

10" Angle Active Trunk Box Subwoofer

Peak Power: 400 Watts Peak Power / 200 Watts RMS

RCA Low Level Input: 0.1 - 6V High Level Input: 1V-8V

500 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 500-watt peak power / 250 watt RMS so you can play your favorite tracks as loud as you want and with style

NON-FATIGUING RUBBER SUSPENSION: The high-performance car woofer speaker has a non-fatiguing rubber suspension along w/ bumped & vented motor structure that completes your woofer enclosure system. Features 4.21” mounting depth for easy installation

2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 85.6 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound

Features: KICKER 43C104 Comp 10" 300 Watt SVC 4-ohm Car Audio Subwoofer. Size: 10 inches (25.0 cm). Impedance: 4 ohms SVC. Max Rec Amplifier Power:* .300 Watts Peak .150 Watts RMS

Recommended power range: 50 - 150 watts RMS. Injection molded SoloKon cone. Optimized Polyfoam Ribbed Surround. Extremely rigid cone, along with 360 degree back bracing eliminates distortion

Double stitched surround for enhanced durability. Tinsel leads woven into the spider with Kicker's Spiralead technology. Single high-temperature voice coil. 45oz. Magnet structure

2) MB Quart DS1 254 Slim 10 Inch Subwoofers

Max Wattage: 800 Watts (400 Watts Per Sub)

RMS Wattage: 400 Watts (200 Watts Per Sub)

900W Max 450W RMS Dual 4 ohm voice coils stamped Steel basket carbon fiber non-pressed paper cone

Multi-layer foam Surround woven tinsel leads chrome push terminals 120 oz. Magnet

2 1/2" 4-layer voice coil SPL dB 92 mounting depth: 5 1/2"

Multi color Charcoal LED grille included

Hifonics BRUTUS subwoofer with dual 4 Ohm design delivers 1600 watts and features heavy gauge, powder-coated, aluminum die-cast basket.

Vented aluminum former holds a 3" voice coil while allowing the heat to be exchanged. (Less heat means less distortion)

Specialized Hifonics dual poly cotton spider with double centering allows the woofer to handle more power with minimum distortions.

Diameter: 10" - Massive 4" high temp voice coil, loudspeaker component

RMS Power Watts: 2000 - 2 OHM - Nominal Power Watts: 4000

Voice Coil: DVC - Sensitivity: 84 dB

These products are OEM replacments meaning they do not come in retail packaging. Less money spent on packaging = more money saved by you.

Marine-grade materials & components to suit the demands of a harsh outdoor environment with an IPx5 marine rating.

Product family look and feel to meet the needs of our JBL customers.

WATT POWER - 10-Inch Marine Subwoofer offers a peak power of 600 watts w/ 4ohm impedance. It lets you pump out some great low-frequency bass volume to enhance the party vibe making it a great addition to your Marine / ATV / UTV music audio system

FOR ENHANCED SOUND - The Hydro subwoofer is a great addition to your marine stereo sound system. No sound system is complete without the perfect subwoofer for complimentary bass so don't deprive your boat from the absolute best sound you can get

WATERPROOF - The professional loud speaker system features IP65 Marine grade Compliant - 100% UV stable case construction making it safe to be installed and used in places where moderate water splashes occur such as in marine vehicles

10-INCH SUBWOOFER ENCLOSURE: The vented 10-inch subwoofer enclosure is factory-tuned and vented for deep, thunderous bass. A high-quality subwoofer that is perfect for your personal taste and preferences

IMPROVED OUTPUT CAPACITY: A one-of-a-kind tuned port with computer-aided design and four layers of dual voice coils significantly improves subwoofer output efficiency, delivering consistent low-frequency bass

ELEGANT AND DURABLE: Thanks to sophisticated engineering and best-in-class resonance-free driver materials, this sub is highly durable and suitable for extended use. With its elegant design, this subwoofer is sure to meet the highest expectations

Power Handling: 1400 W Peak, 700 W RMS

Weight: 16.53

Magnet: Neodymium